Headline
Verbatim Executive Fingerprint Secure SSD GDMSFE01-INI3637-C VER1.1 Missing Trust
When analyzing the Verbatim Executive Fingerprint Secure SSD, Matthias Deeg found out that the validation of the firmware for the USB-to-SATA bridge controller INIC-3637EN only consists of a simple CRC-16 check (XMODEM CRC-16). Thus, an attacker is able to store malicious firmware code for the INIC-3637EN with a correct checksum on the used SPI flash memory chip (XT25F01D), which then gets successfully executed by the USB-to-SATA bridge controller.
Advisory ID: SYSS-2022-011
Product: Executive Fingerprint Secure SSD
Manufacturer: Verbatim
Affected Version(s): GDMSFE01-INI3637-C VER1.1
Tested Version(s): GDMSFE01-INI3637-C VER1.1
Vulnerability Type: Missing Immutable Root of Trust in Hardware
(CWE-1326)
Risk Level: Medium
Solution Status: Open
Manufacturer Notification: 2022-02-03
Solution Date: -
Public Disclosure: 2022-06-08
CVE Reference: CVE-2022-28383
Author of Advisory: Matthias Deeg (SySS GmbH)
Overview:
The Verbatim Executive Fingerprint Secure SSD is a USB drive with AES
256-bit hardware encryption and a built-in fingerprint sensor for
unlocking the device with previously registered fingerprints.
The manufacturer describes the product as follows:
"The AES 256-bit Hardware Encryption seamlessly encrypts all data on the
drive in real-time. The drive is compliant with GDPR requirements as
100% of the drive is securely encrypted. The built-in fingerprint
recognition system allows access for up to eight authorised users and
one administrator who can access the device via a password. The SSD
does not store passwords in the computer or system's volatile memory
making it far more secure than software encryption."[1]
Due to insufficient firmware validation, an attacker can store
malicious firmware code for the USB-to-SATA bridge controller on the USB
drive which gets executed.
Vulnerability Details:
When analyzing the Verbatim Executive Fingerprint Secure SSD, Matthias
Deeg found out that the validation of the firmware for the USB-to-SATA
bridge controller INIC-3637EN only consists of a simple CRC-16 check
(XMODEM CRC-16).
Thus, an attacker is able to store malicious firmware code for the
INIC-3637EN with a correct checksum on the used SPI flash memory chip
(XT25F01D), which then gets successfully executed by the USB-to-SATA
bridge controller.
For instance, this security vulnerability could be exploited in a
so-called “supply chain attack” when the device is still on its way to
its legitimate user.
An attacker with temporary physical access during the supply could
program a modified firmware on the Verbatim Executive Fingerprint Secure
SSD, which always uses an attacker-controlled AES key for the data
encryption, for example.
If, later on, the attacker gains access to the used USB drive, he can
simply decrypt all contained user data.
Proof of Concept (PoC):
SySS was able to read and write the SPI flash memory containing the
firmware of the INIC-3637EN controller (128 KB) using a universal
programmer.
By analyzing the dumped memory content, SySS found out that the
INIC-3637EN firmware is stored from the file offset 0x4000 to the file
offset 0x1BFFB, and that the corresponding XMODEM CRC-16 is stored at
the file offset 0x1FFFC.
Matthias Deeg developed a simple Python tool for updating the checksum
of modified firmware images before writing them to the SPI flash memory
chip.
The following output exemplarily shows updating a modified firmware
image:
$ python update-firmaware.py firmware_hacked.bin
Verbatim Executive Fingerprint Secure SSD Firmware Updater v0.1 -
Matthias Deeg, SySS GmbH (c) 2022
[*] Computed CRC-16 (0x7087) does not match stored CRC-16 (0x48EE).
[*] Successfully updated firmware file
Solution:
SySS GmbH is not aware of a solution for the described security issue.
Disclosure Timeline:
2022-02-03: Vulnerability reported to manufacturer
2022-02-11: Vulnerability reported to manufacturer again
2022-03-07: Vulnerability reported to manufacturer again
2022-06-08: Public release of security advisory
References:
[1] Product website for Verbatim Executive Fingerprint Secure SSD
https://www.verbatim-europe.co.uk/en/prod/executive-fingerprint-secure-ssd-usb-32-gen-1–usb-c-1tb-53657/
[2] SySS Security Advisory SYSS-2022-011
https://www.syss.de/fileadmin/dokumente/Publikationen/Advisories/SYSS-2022-011.txt
[3] SySS GmbH, SySS Responsible Disclosure Policy
https://www.syss.de/en/responsible-disclosure-policy
Credits:
This security vulnerability was found by Matthias Deeg of SySS GmbH.
E-Mail: matthias.deeg (at) syss.de
Public Key:
https://www.syss.de/fileadmin/dokumente/Materialien/PGPKeys/Matthias_Deeg.asc
Key fingerprint = D1F0 A035 F06C E675 CDB9 0514 D9A4 BF6A 34AD 4DAB
Disclaimer:
The information provided in this security advisory is provided “as is”
and without warranty of any kind. Details of this security advisory may
be updated in order to provide as accurate information as possible. The
latest version of this security advisory is available on the SySS website.
Copyright:
Creative Commons - Attribution (by) - Version 3.0
URL: http://creativecommons.org/licenses/by/3.0/deed.enRelated news
When analyzing the external data storage Verbatim Store 'n' Go Secure Portable SSD, Matthias Deeg found out that the validation of the firmware for the USB-to-SATA bridge controller INIC-3637EN only consists of a simple CRC-16 check (XMODEM CRC-16).
When analyzing the Fingerprint Secure Portable Hard Drive, Matthias Deeg found out that the validation of the firmware for the USB-to-SATA bridge controller INIC-3637EN only consists of a simple CRC-16 check (XMODEM CRC-16). Thus, an attacker is able to store malicious firmware code for the INIC-3637EN with a correct checksum on the used SPI flash memory chip (XT25F01B), which then gets successfully executed by the USB-to-SATA bridge controller.
When analyzing the external SSD Verbatim Store n Go Secure Portable HDD, Matthias Deeg found out that the validation of the firmware for the USB-to-SATA bridge controller INIC-3637EN only consists of a simple CRC-16 check (XMODEM CRC-16). Thus, an attacker is able to store malicious firmware code for the INIC-3637EN with a correct checksum on the used SPI flash memory chip (XT25F01D), which then gets successfully executed by the USB-to-SATA bridge controller. For instance, this security vulnerability could be exploited in a so-called "supply chain attack" when the device is still on its way to its legitimate user. An attacker with temporary physical access during the supply could program a modified firmware on the Verbatim Keypad Secure, which always uses an attacker-controlled AES key for the data encryption, for example. If, later on, the attacker gains access to the used USB drive, he can simply decrypt all contained user data.
When analyzing the USB drive Verbatim Keypad Secure version 3.2 Gen 1 Drive, Matthias Deeg found out that the validation of the firmware for the USB-to-SATA bridge controller INIC-3637EN only consists of a simple CRC-16 check (XMODEM CRC-16). Thus, an attacker is able to store malicious firmware code for the INIC-3637EN with a correct checksum on the used SPI flash memory chip (XT25F01D), which then gets successfully executed by the USB-to-SATA bridge controller.
An issue was discovered in certain Verbatim drives through 2022-03-31. Due to insufficient firmware validation, an attacker can store malicious firmware code for the USB-to-SATA bridge controller on the USB drive (e.g., by leveraging physical access during the supply chain). This code is then executed. This affects Keypad Secure USB 3.2 Gen 1 Drive Part Number #49428, Store 'n' Go Secure Portable HDD GD25LK01-3637-C VER4.0, Executive Fingerprint Secure SSD GDMSFE01-INI3637-C VER1.1, and Fingerprint Secure Portable Hard Drive Part Number #53650.