Jenkins Metrics Plugin 4.0.2.8 and earlier stores an access key unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

This advisory announces vulnerabilities in the following Jenkins deliverables:

*   Jenkins (core)
*   Active Directory Plugin
*   Badge Plugin
*   batch task Plugin
*   Bitbucket Branch Source Plugin
*   Configuration as Code Plugin
*   Conjur Secrets Plugin
*   Credentials Binding Plugin
*   Debian Package Builder Plugin
*   Docker Commons Plugin
*   HashiCorp Vault Plugin
*   Mailer Plugin
*   Matrix Project Plugin
*   Metrics Plugin
*   Publish Over SSH Plugin
*   SSH Agent Plugin
*   Warnings Plugin

**Descriptions****CSRF vulnerability in build triggers**

**SECURITY-2558 / CVE-2022-20612**  
**Severity (CVSS):** Medium  
**Description:**

Jenkins 2.329 and earlier, LTS 2.319.1 and earlier does not require POST requests for the HTTP endpoint handling manual build requests when no security realm is set, resulting in a cross-site request forgery (CSRF) vulnerability.

This vulnerability allows attackers to trigger build of job without parameters.

Jenkins 2.330, LTS 2.319.2 requires POST requests for the affected HTTP endpoint.

**CSRF vulnerability and missing permission checks in Mailer Plugin**

**SECURITY-2163 / CVE-2022-20613 (CSRF), CVE-2022-20614 (missing permission check)**  
**Severity (CVSS):** Medium  
**Affected plugin: mailer**  
**Description:**

Mailer Plugin 391.ve4a\_38c1b\_cf4b\_ and earlier does not perform a permission check in a method implementing form validation.

This allows attackers with Overall/Read access to use the DNS used by the Jenkins instance to resolve an attacker-specified hostname.

Additionally, this form validation method does not require POST requests, resulting in a cross-site request forgery (CSRF) vulnerability.

Mailer Plugin 408.vd726a\_1130320 requires POST requests and Overall/Administer permission for the affected form validation method.

**Stored XSS vulnerability in Matrix Project Plugin**

**SECURITY-2017 / CVE-2022-20615**  
**Severity (CVSS):** High  
**Affected plugin: matrix-project**  
**Description:**

Matrix Project Plugin 1.19 and earlier does not escape HTML metacharacters in node and label names, and label descriptions.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Agent/Configure permission.

Matrix Project Plugin 1.20 escapes HTML metacharacters in node and label names, and label descriptions.

**Missing permission check in Credentials Binding Plugin allows validating secret file credentials IDs**

**SECURITY-2342 / CVE-2022-20616**  
**Severity (CVSS):** Low  
**Affected plugin: credentials-binding**  
**Description:**

Credentials Binding Plugin 1.27 and earlier does not perform a permission check in a method implementing form validation.

This allows attackers with Overall/Read access to validate if a credential ID refers to a secret file credential and whether it’s a zip file.

Credentials Binding Plugin 1.27.1 performs permission checks when validating secret file credentials IDs.

**OS command execution vulnerability in Docker Commons Plugin**

**SECURITY-1878 / CVE-2022-20617**  
**Severity (CVSS):** High  
**Affected plugin: docker-commons**  
**Description:**

Docker Commons Plugin 1.17 and earlier does not sanitize the name of an image or a tag.

This results in an OS command execution vulnerability exploitable by attackers with Item/Configure permission or able to control the contents of a previously configured job’s SCM repository.

Docker Commons Plugin 1.18 sanitizes the name of an image or a tag.

**Missing permission checks in Bitbucket Branch Source Plugin allow enumerating credentials IDs**

**SECURITY-2033 / CVE-2022-20618**  
**Severity (CVSS):** Medium  
**Affected plugin: cloudbees-bitbucket-branch-source**  
**Description:**

Bitbucket Branch Source Plugin 737.vdf9dc06105be and earlier does not perform permission checks in several HTTP endpoints.

This allows attackers with Overall/Read access to enumerate credentials IDs of credentials stored in Jenkins. Those can be used as part of an attack to capture the credentials using another vulnerability.

An enumeration of credentials IDs in Bitbucket Branch Source Plugin 746.v350d2781c184 requires the appropriate permissions.

**CSRF vulnerability in Bitbucket Branch Source Plugin allows capturing credentials**

**SECURITY-2467 / CVE-2022-20619**  
**Severity (CVSS):** High  
**Affected plugin: cloudbees-bitbucket-branch-source**  
**Description:**

Bitbucket Branch Source Plugin 737.vdf9dc06105be and earlier does not require POST requests for an HTTP endpoint, resulting in a cross-site request forgery (CSRF) vulnerability.

This allows attackers with Overall/Read access to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins.

Bitbucket Branch Source Plugin 746.v350d2781c184 requires POST requests for the affected HTTP endpoint.

**Missing permission checks in SSH Agent Plugin allow enumerating credentials IDs**

**SECURITY-2189 / CVE-2022-20620**  
**Severity (CVSS):** Medium  
**Affected plugin: ssh-agent**  
**Description:**

SSH Agent Plugin 1.23 and earlier does not perform permission checks in several HTTP endpoints.

This allows attackers with Overall/Read access to enumerate credentials IDs of credentials stored in Jenkins. Those can be used as part of an attack to capture the credentials using another vulnerability.

An enumeration of credentials IDs in SSH Agent Plugin 1.23.2 requires the appropriate permissions.

**Access key stored in plain text by Metrics Plugin**

**SECURITY-1624 / CVE-2022-20621**  
**Severity (CVSS):** Low  
**Affected plugin: metrics**  
**Description:**

Metrics Plugin 4.0.2.8 and earlier stores access keys unencrypted in its global configuration file jenkins.metrics.api.MetricsAccessKey.xml on the Jenkins controller as part of its configuration.

This access key can be viewed by users with access to the Jenkins controller file system.

Metrics Plugin 4.0.2.8.1 stores access key encrypted once its configuration is saved again.

Additionally, the token value is only displayed once when it is generated.

**User passwords transmitted in plain text by Active Directory Plugin**

**SECURITY-1389 / CVE-2022-23105**  
**Severity (CVSS):** Medium  
**Affected plugin: active-directory**  
**Description:**

Active Directory Plugin implements two separate modes: integration with ADSI on Windows, and an OS agnostic LDAP-based mode.

Active Directory Plugin 2.25 and earlier does not encrypt the transmission of data between the Jenkins controller and Active Directory servers unless it is configured to use the OS agnostic LDAP mode and the system property hudson.plugins.active_directory.ActiveDirectorySecurityRealm.forceLdaps is set to true.

This allows attackers able to capture network traffic between the Jenkins controller and Active Directory servers to obtain credentials of users logging into Jenkins, as well as credentials of the manager DN (LDAP mode) or the Windows/Active Directory user Jenkins is running as (ADSI mode).

Active Directory Plugin 2.25.1 adds an option to only connect to Active Directory via TLS/SSL to both modes (ADSI and LDAP). This option is enabled by default for new installations and is now the recommended way to enforce TLS/SSL for connections to Active Directory. Unlike the existing StartTLS option for the LDAP-based mode, it will not proceed using an insecure connection if establishing a TLS/SSL connection fails.

Administrators upgrading from previous versions of the plugin will be shown a warning on the Jenkins UI requesting they update the plugin configuration unless the (now otherwise obsolete) flag hudson.plugins.active_directory.ActiveDirectorySecurityRealm.forceLdaps was set to true.

The plugin exposes configuration of the ADSI flags implementing the TLS/SSL requirement via the system properties hudson.plugins.active_directory.ActiveDirectoryAuthenticationProvider.ADSI_FLAGS_OVERRIDE and hudson.plugins.active_directory.ActiveDirectoryAuthenticationProvider.ADSI_PASSWORDLESS_FLAGS_OVERRIDE. See the plugin documentation for further details.

Care needs to be taken when reconfiguring the security realm to not accidentally lock yourself out. See the documentation for advice how to resolve this problem if it occurs.

**Non-constant time token comparison in Configuration as Code Plugin**

**SECURITY-2141 / CVE-2022-23106**  
**Severity (CVSS):** Low  
**Affected plugin: configuration-as-code**  
**Description:**

Configuration as Code Plugin 1.55 and earlier does not use a constant-time comparison when checking whether two authentication tokens are equal.

This could potentially allow attackers to use statistical methods to obtain a valid authentication token.

Configuration as Code Plugin 1.55.1 now uses a constant-time comparison when validating authentication tokens.

**Path traversal vulnerability in Warnings Plugin**

**SECURITY-2090 / CVE-2022-23107**  
**Severity (CVSS):** Medium  
**Affected plugin: warnings-ng**  
**Description:**

Warnings Plugin 9.10.2 and earlier does not restrict the name of a file when configuring a custom ID.

This allows attackers with Item/Configure permission to write and read specific files with a hard-coded suffix on the Jenkins controller file system.

Warnings Plugin 9.10.3 checks for the presence of prohibited directory separator characters in the custom ID.

**Stored XSS vulnerability in Badge Plugin**

**SECURITY-2547 / CVE-2022-23108**  
**Severity (CVSS):** High  
**Affected plugin: badge**  
**Description:**

Badge Plugin allows adding custom build badges with a custom description and optionally a link to a URL.

Badge Plugin 1.9 and earlier does not escape the description and does not check for allowed protocols when creating a badge.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

Badge Plugin 1.9.1 escapes the description and check for allowed protocols when creating a badge.

**Improper credentials masking in HashiCorp Vault Plugin**

**SECURITY-2213 / CVE-2022-23109**  
**Severity (CVSS):** Medium  
**Affected plugin: hashicorp-vault-plugin**  
**Description:**

Pipelines display commands executed in their Pipeline step descriptions and their output in build logs. To mask sensitive output, Pipeline: Groovy Plugin 2.84 and earlier specified an allowlist of known non-sensitive variables and masked everything else. This caused problems, so Pipeline: Groovy Plugin 2.85 and newer expects pipeline steps to explicitly specify that variables are to be treated as sensitive and should be removed from output.

HashiCorp Vault Plugin 3.7.0 and earlier relied on the previous behavior and did not explicitly declare variables as sensitive or redacted them.

This can result in exposure of Vault credentials in Pipeline build logs and Pipeline step descriptions.

HashiCorp Vault Plugin 3.8.0 explicitly masks Vault credentials in build logs and Pipeline step descriptions.

This fix only applies to new builds. Administrators are advised to review build logs and Pipeline metadata files created before HashiCorp Vault Plugin 3.8.0 for the presence of Vault credentials.

**Stored XSS vulnerability in Publish Over SSH Plugin**

**SECURITY-2287 / CVE-2022-23110**  
**Severity (CVSS):** Medium  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier does not escape the SSH server name.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Overall/Administer permission.

**CSRF vulnerability and missing permission checks in Publish Over SSH Plugin**

**SECURITY-2290 / CVE-2022-23111 (CSRF), CVE-2022-23112 (missing permission check)**  
**Severity (CVSS):** Medium  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier does not perform permission checks in methods implementing connection tests.

This allows attackers with Overall/Read access to connect to an attacker-specified SSH server using attacker-specified credentials.

Additionally, these connection tests methods do not require POST requests, resulting in a cross-site request forgery (CSRF) vulnerability.

**Path traversal vulnerability in Publish Over SSH Plugin**

**SECURITY-2307 / CVE-2022-23113**  
**Severity (CVSS):** Medium  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier performs a validation of the file name specifying whether it is present or not.

This results in a path traversal vulnerability allowing attackers with Item/Configure permission to discover the name of the Jenkins controller files.

**Password stored in plain text by Publish Over SSH Plugin**

**SECURITY-2291 / CVE-2022-23114**  
**Severity (CVSS):** Low  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier stores password unencrypted in its global configuration file jenkins.plugins.publish_over_ssh.BapSshPublisherPlugin.xml on the Jenkins controller as part of its configuration.

This password can be viewed by users with access to the Jenkins controller file system.

**CSRF vulnerability in batch task Plugin**

**SECURITY-1025 / CVE-2022-23115**  
**Severity (CVSS):** Medium  
**Affected plugin: batch-task**  
**Description:**

batch task Plugin 1.19 and earlier does not require POST requests for several HTTP endpoints, resulting in cross-site request forgery (CSRF) vulnerabilities.

These vulnerabilities allow attackers with Overall/Read access to retrieve logs, build or delete a batch task.

**Agent-to-controller security bypass in Conjur Secrets Plugin allows decrypting secrets**

**SECURITY-2522 (1) / CVE-2022-23116**  
**Severity (CVSS):** Medium  
**Affected plugin: conjur-credentials**  
**Description:**

Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows agent processes to obtain the plain text of any attacker-provided encrypted secret.

This allows attackers able to control agent processes to decrypt secrets stored in Jenkins obtained through another method.

**Agent-to-controller security bypass in Conjur Secrets Plugin allows retrieving all credentials**

**SECURITY-2522 (2) / CVE-2022-23117**  
**Severity (CVSS):** Medium  
**Affected plugin: conjur-credentials**  
**Description:**

Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows agent processes to obtain all username/password credentials (Credentials Plugin) stored on the Jenkins controller.

This allows attackers able to control agent processes to retrieve those credentials.

**Agent-to-controller security bypass in Debian Package Builder Plugin**

**SECURITY-2546 / CVE-2022-23118**  
**Severity (CVSS):** High  
**Affected plugin: debian-package-builder**  
**Description:**

Debian Package Builder Plugin 1.6.11 and earlier implements functionality that allows agent processes to invoke command-line git at an attacker-specified path on the controller.

This allows attackers able to control agent processes to invoke arbitrary OS commands on the controller.

**Severity**

*   SECURITY-1025: Medium
*   SECURITY-1389: Medium
*   SECURITY-1624: Low
*   SECURITY-1878: High
*   SECURITY-2017: High
*   SECURITY-2033: Medium
*   SECURITY-2090: Medium
*   SECURITY-2141: Low
*   SECURITY-2163: Medium
*   SECURITY-2189: Medium
*   SECURITY-2213: Medium
*   SECURITY-2287: Medium
*   SECURITY-2290: Medium
*   SECURITY-2291: Low
*   SECURITY-2307: Medium
*   SECURITY-2342: Low
*   SECURITY-2467: High
*   SECURITY-2522 (1): Medium
*   SECURITY-2522 (2): Medium
*   SECURITY-2546: High
*   SECURITY-2547: High
*   SECURITY-2558: Medium

**Affected Versions**

*   **Jenkins weekly** up to and including 2.329
*   **Jenkins LTS** up to and including 2.319.1
*   **Active Directory Plugin** up to and including 2.25
*   **Badge Plugin** up to and including 1.9
*   **batch task Plugin** up to and including 1.19
*   **Bitbucket Branch Source Plugin** up to and including 737.vdf9dc06105be
*   **Configuration as Code Plugin** up to and including 1.55
*   **Conjur Secrets Plugin** up to and including 1.0.9
*   **Credentials Binding Plugin** up to and including 1.27
*   **Debian Package Builder Plugin** up to and including 1.6.11
*   **Docker Commons Plugin** up to and including 1.17
*   **HashiCorp Vault Plugin** up to and including 3.7.0
*   **Mailer Plugin** up to and including 391.ve4a\_38c1b\_cf4b\_
*   **Matrix Project Plugin** up to and including 1.19
*   **Metrics Plugin** up to and including 4.0.2.8
*   **Publish Over SSH Plugin** up to and including 1.22
*   **SSH Agent Plugin** up to and including 1.23
*   **Warnings Plugin** up to and including 9.10.2

**Fix**

*   **Jenkins weekly** should be updated to version 2.330
*   **Jenkins LTS** should be updated to version 2.319.2
*   **Active Directory Plugin** should be updated to version 2.25.1
*   **Badge Plugin** should be updated to version 1.9.1
*   **Bitbucket Branch Source Plugin** should be updated to version 746.v350d2781c184
*   **Configuration as Code Plugin** should be updated to version 1.55.1
*   **Credentials Binding Plugin** should be updated to version 1.27.1
*   **Docker Commons Plugin** should be updated to version 1.18
*   **HashiCorp Vault Plugin** should be updated to version 3.8.0
*   **Mailer Plugin** should be updated to version 408.vd726a\_1130320
*   **Matrix Project Plugin** should be updated to version 1.20
*   **Metrics Plugin** should be updated to version 4.0.2.8.1
*   **SSH Agent Plugin** should be updated to version 1.23.2
*   **Warnings Plugin** should be updated to version 9.10.3

These versions include fixes to the vulnerabilities described above. All prior versions are considered to be affected by these vulnerabilities unless otherwise indicated.

As of publication of this advisory, no fixes are available for the following plugins:

*   batch task Plugin
*   Conjur Secrets Plugin
*   Debian Package Builder Plugin
*   Publish Over SSH Plugin

Learn why we announce these issues.

**Credit**

The Jenkins project would like to thank the reporters for discovering and reporting these vulnerabilities:

*   **Daniel Beck, CloudBees, Inc.** for SECURITY-2033, SECURITY-2522 (1), SECURITY-2522 (2), SECURITY-2546
*   **Devin Nusbaum, CloudBees, Inc.** for SECURITY-2467
*   **James Nord, CloudBees, Inc.** for SECURITY-2141
*   **Jasen Minton** for SECURITY-2213
*   **Kevin Guerroudj** for SECURITY-2287
*   **Kevin Guerroudj, CloudBees, Inc.** for SECURITY-2547
*   **Kevin Guerroudj, CloudBees, Inc. and Wadeck Follonier, CloudBees, Inc.** for SECURITY-2558
*   **Kevin Guerroudj, Justin Philip and Marc Heyries** for SECURITY-2307
*   **Marc Heyries, Justin Philip and Kevin Guerroudj** for SECURITY-2290, SECURITY-2291
*   **Matt Sicker, CloudBees, Inc.** for SECURITY-2163
*   **Oleg Nenashev** for SECURITY-1025
*   **Tomasz Szuba** for SECURITY-1878
*   **Wadeck Follonier, CloudBees, Inc.** for SECURITY-2017, SECURITY-2090
*   **Wasin Saengow** for SECURITY-1624

CVE-2022-20621: Jenkins Security Advisory 2022-01-12

A missing permission check in Jenkins Mailer Plugin 391.ve4a_38c1b_cf4b_ and earlier allows attackers with Overall/Read access to use the DNS used by the Jenkins instance to resolve an attacker-specified hostname.

This advisory announces vulnerabilities in the following Jenkins deliverables:

*   Jenkins (core)
*   Active Directory Plugin
*   Badge Plugin
*   batch task Plugin
*   Bitbucket Branch Source Plugin
*   Configuration as Code Plugin
*   Conjur Secrets Plugin
*   Credentials Binding Plugin
*   Debian Package Builder Plugin
*   Docker Commons Plugin
*   HashiCorp Vault Plugin
*   Mailer Plugin
*   Matrix Project Plugin
*   Metrics Plugin
*   Publish Over SSH Plugin
*   SSH Agent Plugin
*   Warnings Next Generation Plugin

**Descriptions****CSRF vulnerability in build triggers**

**SECURITY-2558 / CVE-2022-20612**  
**Severity (CVSS):** Medium  
**Description:**

Jenkins 2.329 and earlier, LTS 2.319.1 and earlier does not require POST requests for the HTTP endpoint handling manual build requests when no security realm is set, resulting in a cross-site request forgery (CSRF) vulnerability.

This vulnerability allows attackers to trigger build of job without parameters.

Jenkins 2.330, LTS 2.319.2 requires POST requests for the affected HTTP endpoint.

**CSRF vulnerability and missing permission checks in Mailer Plugin**

**SECURITY-2163 / CVE-2022-20613 (CSRF), CVE-2022-20614 (missing permission check)**  
**Severity (CVSS):** Medium  
**Affected plugin: mailer**  
**Description:**

Mailer Plugin 391.ve4a\_38c1b\_cf4b\_ and earlier does not perform a permission check in a method implementing form validation.

This allows attackers with Overall/Read access to use the DNS used by the Jenkins instance to resolve an attacker-specified hostname.

Additionally, this form validation method does not require POST requests, resulting in a cross-site request forgery (CSRF) vulnerability.

Mailer Plugin 408.vd726a\_1130320 requires POST requests and Overall/Administer permission for the affected form validation method.

**Stored XSS vulnerability in Matrix Project Plugin**

**SECURITY-2017 / CVE-2022-20615**  
**Severity (CVSS):** High  
**Affected plugin: matrix-project**  
**Description:**

Matrix Project Plugin 1.19 and earlier does not escape HTML metacharacters in node and label names, and label descriptions.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Agent/Configure permission.

Matrix Project Plugin 1.20 escapes HTML metacharacters in node and label names, and label descriptions.

**Missing permission check in Credentials Binding Plugin allows validating secret file credentials IDs**

**SECURITY-2342 / CVE-2022-20616**  
**Severity (CVSS):** Low  
**Affected plugin: credentials-binding**  
**Description:**

Credentials Binding Plugin 1.27 and earlier does not perform a permission check in a method implementing form validation.

This allows attackers with Overall/Read access to validate if a credential ID refers to a secret file credential and whether it’s a zip file.

Credentials Binding Plugin 1.27.1 performs permission checks when validating secret file credentials IDs.

**OS command execution vulnerability in Docker Commons Plugin**

**SECURITY-1878 / CVE-2022-20617**  
**Severity (CVSS):** High  
**Affected plugin: docker-commons**  
**Description:**

Docker Commons Plugin 1.17 and earlier does not sanitize the name of an image or a tag.

This results in an OS command execution vulnerability exploitable by attackers with Item/Configure permission or able to control the contents of a previously configured job’s SCM repository.

Docker Commons Plugin 1.18 sanitizes the name of an image or a tag.

**Missing permission checks in Bitbucket Branch Source Plugin allow enumerating credentials IDs**

**SECURITY-2033 / CVE-2022-20618**  
**Severity (CVSS):** Medium  
**Affected plugin: cloudbees-bitbucket-branch-source**  
**Description:**

Bitbucket Branch Source Plugin 737.vdf9dc06105be and earlier does not perform permission checks in several HTTP endpoints.

This allows attackers with Overall/Read access to enumerate credentials IDs of credentials stored in Jenkins. Those can be used as part of an attack to capture the credentials using another vulnerability.

An enumeration of credentials IDs in Bitbucket Branch Source Plugin 746.v350d2781c184 requires the appropriate permissions.

**CSRF vulnerability in Bitbucket Branch Source Plugin allows capturing credentials**

**SECURITY-2467 / CVE-2022-20619**  
**Severity (CVSS):** High  
**Affected plugin: cloudbees-bitbucket-branch-source**  
**Description:**

Bitbucket Branch Source Plugin 737.vdf9dc06105be and earlier does not require POST requests for an HTTP endpoint, resulting in a cross-site request forgery (CSRF) vulnerability.

This allows attackers with Overall/Read access to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins.

Bitbucket Branch Source Plugin 746.v350d2781c184 requires POST requests for the affected HTTP endpoint.

**Missing permission checks in SSH Agent Plugin allow enumerating credentials IDs**

**SECURITY-2189 / CVE-2022-20620**  
**Severity (CVSS):** Medium  
**Affected plugin: ssh-agent**  
**Description:**

SSH Agent Plugin 1.23 and earlier does not perform permission checks in several HTTP endpoints.

This allows attackers with Overall/Read access to enumerate credentials IDs of credentials stored in Jenkins. Those can be used as part of an attack to capture the credentials using another vulnerability.

An enumeration of credentials IDs in SSH Agent Plugin 1.23.2 requires the appropriate permissions.

**Access key stored in plain text by Metrics Plugin**

**SECURITY-1624 / CVE-2022-20621**  
**Severity (CVSS):** Low  
**Affected plugin: metrics**  
**Description:**

Metrics Plugin 4.0.2.8 and earlier stores access keys unencrypted in its global configuration file jenkins.metrics.api.MetricsAccessKey.xml on the Jenkins controller as part of its configuration.

This access key can be viewed by users with access to the Jenkins controller file system.

Metrics Plugin 4.0.2.8.1 stores access key encrypted once its configuration is saved again.

Additionally, the token value is only displayed once when it is generated.

**User passwords transmitted in plain text by Active Directory Plugin**

**SECURITY-1389 / CVE-2022-23105**  
**Severity (CVSS):** Medium  
**Affected plugin: active-directory**  
**Description:**

Active Directory Plugin implements two separate modes: integration with ADSI on Windows, and an OS agnostic LDAP-based mode.

Active Directory Plugin 2.25 and earlier does not encrypt the transmission of data between the Jenkins controller and Active Directory servers unless it is configured to use the OS agnostic LDAP mode and the system property hudson.plugins.active_directory.ActiveDirectorySecurityRealm.forceLdaps is set to true.

This allows attackers able to capture network traffic between the Jenkins controller and Active Directory servers to obtain credentials of users logging into Jenkins, as well as credentials of the manager DN (LDAP mode) or the Windows/Active Directory user Jenkins is running as (ADSI mode).

Active Directory Plugin 2.25.1 adds an option to only connect to Active Directory via TLS/SSL to both modes (ADSI and LDAP). This option is enabled by default for new installations and is now the recommended way to enforce TLS/SSL for connections to Active Directory. Unlike the existing StartTLS option for the LDAP-based mode, it will not proceed using an insecure connection if establishing a TLS/SSL connection fails.

Administrators upgrading from previous versions of the plugin will be shown a warning on the Jenkins UI requesting they update the plugin configuration unless the (now otherwise obsolete) flag hudson.plugins.active_directory.ActiveDirectorySecurityRealm.forceLdaps was set to true.

The plugin exposes configuration of the ADSI flags implementing the TLS/SSL requirement via the system properties hudson.plugins.active_directory.ActiveDirectoryAuthenticationProvider.ADSI_FLAGS_OVERRIDE and hudson.plugins.active_directory.ActiveDirectoryAuthenticationProvider.ADSI_PASSWORDLESS_FLAGS_OVERRIDE. See the plugin documentation for further details.

Care needs to be taken when reconfiguring the security realm to not accidentally lock yourself out. See the documentation for advice how to resolve this problem if it occurs.

**Non-constant time token comparison in Configuration as Code Plugin**

**SECURITY-2141 / CVE-2022-23106**  
**Severity (CVSS):** Low  
**Affected plugin: configuration-as-code**  
**Description:**

Configuration as Code Plugin 1.55 and earlier does not use a constant-time comparison when checking whether two authentication tokens are equal.

This could potentially allow attackers to use statistical methods to obtain a valid authentication token.

Configuration as Code Plugin 1.55.1 now uses a constant-time comparison when validating authentication tokens.

**Path traversal vulnerability in Warnings Next Generation Plugin**

**SECURITY-2090 / CVE-2022-23107**  
**Severity (CVSS):** Medium  
**Affected plugin: warnings-ng**  
**Description:**

Warnings Next Generation Plugin 9.10.2 and earlier does not restrict the name of a file when configuring a custom ID.

This allows attackers with Item/Configure permission to write and read specific files with a hard-coded suffix on the Jenkins controller file system.

Warnings Next Generation Plugin 9.10.3 checks for the presence of prohibited directory separator characters in the custom ID.

**Stored XSS vulnerability in Badge Plugin**

**SECURITY-2547 / CVE-2022-23108**  
**Severity (CVSS):** High  
**Affected plugin: badge**  
**Description:**

Badge Plugin allows adding custom build badges with a custom description and optionally a link to a URL.

Badge Plugin 1.9 and earlier does not escape the description and does not check for allowed protocols when creating a badge.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

Badge Plugin 1.9.1 escapes the description and check for allowed protocols when creating a badge.

**Improper credentials masking in HashiCorp Vault Plugin**

**SECURITY-2213 / CVE-2022-23109**  
**Severity (CVSS):** Medium  
**Affected plugin: hashicorp-vault-plugin**  
**Description:**

Pipelines display commands executed in their Pipeline step descriptions and their output in build logs. To mask sensitive output, Pipeline: Groovy Plugin 2.84 and earlier specified an allowlist of known non-sensitive variables and masked everything else. This caused problems, so Pipeline: Groovy Plugin 2.85 and newer expects pipeline steps to explicitly specify that variables are to be treated as sensitive and should be removed from output.

HashiCorp Vault Plugin 3.7.0 and earlier relied on the previous behavior and did not explicitly declare variables as sensitive or redacted them.

This can result in exposure of Vault credentials in Pipeline build logs and Pipeline step descriptions.

HashiCorp Vault Plugin 3.8.0 explicitly masks Vault credentials in build logs and Pipeline step descriptions.

This fix only applies to new builds. Administrators are advised to review build logs and Pipeline metadata files created before HashiCorp Vault Plugin 3.8.0 for the presence of Vault credentials.

**Stored XSS vulnerability in Publish Over SSH Plugin**

**SECURITY-2287 / CVE-2022-23110**  
**Severity (CVSS):** Medium  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier does not escape the SSH server name.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Overall/Administer permission.

**CSRF vulnerability and missing permission checks in Publish Over SSH Plugin**

**SECURITY-2290 / CVE-2022-23111 (CSRF), CVE-2022-23112 (missing permission check)**  
**Severity (CVSS):** Medium  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier does not perform permission checks in methods implementing connection tests.

This allows attackers with Overall/Read access to connect to an attacker-specified SSH server using attacker-specified credentials.

Additionally, these connection tests methods do not require POST requests, resulting in a cross-site request forgery (CSRF) vulnerability.

**Path traversal vulnerability in Publish Over SSH Plugin**

**SECURITY-2307 / CVE-2022-23113**  
**Severity (CVSS):** Medium  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier performs a validation of the file name specifying whether it is present or not.

This results in a path traversal vulnerability allowing attackers with Item/Configure permission to discover the name of the Jenkins controller files.

**Password stored in plain text by Publish Over SSH Plugin**

**SECURITY-2291 / CVE-2022-23114**  
**Severity (CVSS):** Low  
**Affected plugin: publish-over-ssh**  
**Description:**

Publish Over SSH Plugin 1.22 and earlier stores password unencrypted in its global configuration file jenkins.plugins.publish_over_ssh.BapSshPublisherPlugin.xml on the Jenkins controller as part of its configuration.

This password can be viewed by users with access to the Jenkins controller file system.

**CSRF vulnerability in batch task Plugin**

**SECURITY-1025 / CVE-2022-23115**  
**Severity (CVSS):** Medium  
**Affected plugin: batch-task**  
**Description:**

batch task Plugin 1.19 and earlier does not require POST requests for several HTTP endpoints, resulting in cross-site request forgery (CSRF) vulnerabilities.

These vulnerabilities allow attackers with Overall/Read access to retrieve logs, build or delete a batch task.

**Agent-to-controller security bypass in Conjur Secrets Plugin allows decrypting secrets**

**SECURITY-2522 (1) / CVE-2022-23116**  
**Severity (CVSS):** Medium  
**Affected plugin: conjur-credentials**  
**Description:**

Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows agent processes to obtain the plain text of any attacker-provided encrypted secret.

This allows attackers able to control agent processes to decrypt secrets stored in Jenkins obtained through another method.

**Agent-to-controller security bypass in Conjur Secrets Plugin allows retrieving all credentials**

**SECURITY-2522 (2) / CVE-2022-23117**  
**Severity (CVSS):** Medium  
**Affected plugin: conjur-credentials**  
**Description:**

Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows agent processes to obtain all username/password credentials (Credentials Plugin) stored on the Jenkins controller.

This allows attackers able to control agent processes to retrieve those credentials.

**Agent-to-controller security bypass in Debian Package Builder Plugin**

**SECURITY-2546 / CVE-2022-23118**  
**Severity (CVSS):** High  
**Affected plugin: debian-package-builder**  
**Description:**

Debian Package Builder Plugin 1.6.11 and earlier implements functionality that allows agent processes to invoke command-line git at an attacker-specified path on the controller.

This allows attackers able to control agent processes to invoke arbitrary OS commands on the controller.

**Severity**

*   SECURITY-1025: Medium
*   SECURITY-1389: Medium
*   SECURITY-1624: Low
*   SECURITY-1878: High
*   SECURITY-2017: High
*   SECURITY-2033: Medium
*   SECURITY-2090: Medium
*   SECURITY-2141: Low
*   SECURITY-2163: Medium
*   SECURITY-2189: Medium
*   SECURITY-2213: Medium
*   SECURITY-2287: Medium
*   SECURITY-2290: Medium
*   SECURITY-2291: Low
*   SECURITY-2307: Medium
*   SECURITY-2342: Low
*   SECURITY-2467: High
*   SECURITY-2522 (1): Medium
*   SECURITY-2522 (2): Medium
*   SECURITY-2546: High
*   SECURITY-2547: High
*   SECURITY-2558: Medium

**Affected Versions**

*   Jenkins weekly up to and including 2.329
*   Jenkins LTS up to and including 2.319.1
*   **Active Directory Plugin** up to and including 2.25
*   **Badge Plugin** up to and including 1.9
*   **batch task Plugin** up to and including 1.19
*   **Bitbucket Branch Source Plugin** up to and including 737.vdf9dc06105be
*   **Configuration as Code Plugin** up to and including 1.55
*   **Conjur Secrets Plugin** up to and including 1.0.9
*   **Credentials Binding Plugin** up to and including 1.27
*   **Debian Package Builder Plugin** up to and including 1.6.11
*   **Docker Commons Plugin** up to and including 1.17
*   **HashiCorp Vault Plugin** up to and including 3.7.0
*   **Mailer Plugin** up to and including 391.ve4a\_38c1b\_cf4b\_
*   **Matrix Project Plugin** up to and including 1.19
*   **Metrics Plugin** up to and including 4.0.2.8
*   **Publish Over SSH Plugin** up to and including 1.22
*   **SSH Agent Plugin** up to and including 1.23
*   **Warnings Next Generation Plugin** up to and including 9.10.2

**Fix**

*   Jenkins weekly should be updated to version 2.330
*   Jenkins LTS should be updated to version 2.319.2
*   **Active Directory Plugin** should be updated to version 2.25.1
*   **Badge Plugin** should be updated to version 1.9.1
*   **Bitbucket Branch Source Plugin** should be updated to version 746.v350d2781c184
*   **Configuration as Code Plugin** should be updated to version 1.55.1
*   **Credentials Binding Plugin** should be updated to version 1.27.1
*   **Docker Commons Plugin** should be updated to version 1.18
*   **HashiCorp Vault Plugin** should be updated to version 3.8.0
*   **Mailer Plugin** should be updated to version 408.vd726a\_1130320
*   **Matrix Project Plugin** should be updated to version 1.20
*   **Metrics Plugin** should be updated to version 4.0.2.8.1
*   **SSH Agent Plugin** should be updated to version 1.23.2
*   **Warnings Next Generation Plugin** should be updated to version 9.10.3

These versions include fixes to the vulnerabilities described above. All prior versions are considered to be affected by these vulnerabilities unless otherwise indicated.

As of publication of this advisory, no fixes are available for the following plugins:

*   batch task Plugin
*   Conjur Secrets Plugin
*   Debian Package Builder Plugin
*   Publish Over SSH Plugin

Learn why we announce these issues.

**Credit**

The Jenkins project would like to thank the reporters for discovering and reporting these vulnerabilities:

*   **Daniel Beck, CloudBees, Inc.** for SECURITY-2033, SECURITY-2522 (1), SECURITY-2522 (2), SECURITY-2546
*   **Devin Nusbaum, CloudBees, Inc.** for SECURITY-2467
*   **James Nord, CloudBees, Inc.** for SECURITY-2141
*   **Jasen Minton** for SECURITY-2213
*   **Kevin Guerroudj** for SECURITY-2287
*   **Kevin Guerroudj, CloudBees, Inc.** for SECURITY-2547
*   **Kevin Guerroudj, CloudBees, Inc. and Wadeck Follonier, CloudBees, Inc.** for SECURITY-2558
*   **Kevin Guerroudj, Justin Philip and Marc Heyries** for SECURITY-2307
*   **Marc Heyries, Justin Philip and Kevin Guerroudj** for SECURITY-2290, SECURITY-2291
*   **Matt Sicker, CloudBees, Inc.** for SECURITY-2163
*   **Oleg Nenashev** for SECURITY-1025
*   **Tomasz Szuba** for SECURITY-1878
*   **Wadeck Follonier, CloudBees, Inc.** for SECURITY-2017, SECURITY-2090
*   **Wasin Saengow** for SECURITY-1624

CVE-2022-20614: Jenkins Security Advisory 2022-01-12

Jenkins Debian Package Builder Plugin 1.6.11 and earlier implements functionality that allows agents to invoke command-line `git` at an attacker-specified path on the controller, allowing attackers able to control agent processes to invoke arbitrary OS commands on the controller.

This advisory announces vulnerabilities in the following Jenkins deliverables:

*   Jenkins (core)
*   Active Directory Plugin
*   Badge Plugin
*   batch task Plugin
*   Bitbucket Branch Source Plugin
*   Configuration as Code Plugin
*   Conjur Secrets Plugin
*   Credentials Binding Plugin
*   Debian Package Builder Plugin
*   Docker Commons Plugin
*   HashiCorp Vault Plugin
*   Mailer Plugin
*   Matrix Project Plugin
*   Metrics Plugin
*   Publish Over SSH Plugin
*   SSH Agent Plugin
*   Warnings Next Generation Plugin

**Descriptions****CSRF vulnerability in build triggers**

**SECURITY-2558 / CVE-2022-20612**

Jenkins 2.329 and earlier, LTS 2.319.1 and earlier does not require POST requests for the HTTP endpoint handling manual build requests when no security realm is set, resulting in a cross-site request forgery (CSRF) vulnerability.

This vulnerability allows attackers to trigger build of job without parameters.

Jenkins 2.330, LTS 2.319.2 requires POST requests for the affected HTTP endpoint.

**CSRF vulnerability and missing permission checks in Mailer Plugin**

**SECURITY-2163 / CVE-2022-20613 (CSRF), CVE-2022-20614 (missing permission check)**

Mailer Plugin 391.ve4a\_38c1b\_cf4b\_ and earlier does not perform a permission check in a method implementing form validation.

This allows attackers with Overall/Read access to use the DNS used by the Jenkins instance to resolve an attacker-specified hostname.

Additionally, this form validation method does not require POST requests, resulting in a cross-site request forgery (CSRF) vulnerability.

Mailer Plugin 408.vd726a\_1130320 requires POST requests and Overall/Administer permission for the affected form validation method.

**Stored XSS vulnerability in Matrix Project Plugin**

**SECURITY-2017 / CVE-2022-20615**

Matrix Project Plugin 1.19 and earlier does not escape HTML metacharacters in node and label names, and label descriptions.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Agent/Configure permission.

Matrix Project Plugin 1.20 escapes HTML metacharacters in node and label names, and label descriptions.

**Missing permission check in Credentials Binding Plugin allows validating secret file credentials IDs**

**SECURITY-2342 / CVE-2022-20616**

Credentials Binding Plugin 1.27 and earlier does not perform a permission check in a method implementing form validation.

This allows attackers with Overall/Read access to validate if a credential ID refers to a secret file credential and whether it’s a zip file.

Credentials Binding Plugin 1.27.1 performs permission checks when validating secret file credentials IDs.

**OS command execution vulnerability in Docker Commons Plugin**

**SECURITY-1878 / CVE-2022-20617**

Docker Commons Plugin 1.17 and earlier does not sanitize the name of an image or a tag.

This results in an OS command execution vulnerability exploitable by attackers with Item/Configure permission or able to control the contents of a previously configured job’s SCM repository.

Docker Commons Plugin 1.18 sanitizes the name of an image or a tag.

**Missing permission checks in Bitbucket Branch Source Plugin allow enumerating credentials IDs**

**SECURITY-2033 / CVE-2022-20618**

Bitbucket Branch Source Plugin 737.vdf9dc06105be and earlier does not perform permission checks in several HTTP endpoints.

This allows attackers with Overall/Read access to enumerate credentials IDs of credentials stored in Jenkins. Those can be used as part of an attack to capture the credentials using another vulnerability.

An enumeration of credentials IDs in Bitbucket Branch Source Plugin 746.v350d2781c184 requires the appropriate permissions.

**CSRF vulnerability in Bitbucket Branch Source Plugin allows capturing credentials**

**SECURITY-2467 / CVE-2022-20619**

Bitbucket Branch Source Plugin 737.vdf9dc06105be and earlier does not require POST requests for an HTTP endpoint, resulting in a cross-site request forgery (CSRF) vulnerability.

This allows attackers with Overall/Read access to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins.

Bitbucket Branch Source Plugin 746.v350d2781c184 requires POST requests for the affected HTTP endpoint.

**Missing permission checks in SSH Agent Plugin allow enumerating credentials IDs**

**SECURITY-2189 / CVE-2022-20620**

SSH Agent Plugin 1.23 and earlier does not perform permission checks in several HTTP endpoints.

This allows attackers with Overall/Read access to enumerate credentials IDs of credentials stored in Jenkins. Those can be used as part of an attack to capture the credentials using another vulnerability.

An enumeration of credentials IDs in SSH Agent Plugin 1.23.2 requires the appropriate permissions.

**Access key stored in plain text by Metrics Plugin**

**SECURITY-1624 / CVE-2022-20621**

Metrics Plugin 4.0.2.8 and earlier stores access keys unencrypted in its global configuration file `jenkins.metrics.api.MetricsAccessKey.xml` on the Jenkins controller as part of its configuration.

This access key can be viewed by users with access to the Jenkins controller file system.

Metrics Plugin 4.0.2.8.1 stores access key encrypted once its configuration is saved again.

Additionally, the token value is only displayed once when it is generated.

**User passwords transmitted in plain text by Active Directory Plugin**

**SECURITY-1389 / CVE-2022-23105**

Active Directory Plugin implements two separate modes: integration with ADSI on Windows, and an OS agnostic LDAP-based mode.

Active Directory Plugin 2.25 and earlier does not encrypt the transmission of data between the Jenkins controller and Active Directory servers unless it is configured to use the OS agnostic LDAP mode and the system property `hudson.plugins.active_directory.ActiveDirectorySecurityRealm.forceLdaps` is set to `true`.

This allows attackers able to capture network traffic between the Jenkins controller and Active Directory servers to obtain credentials of users logging into Jenkins, as well as credentials of the manager DN (LDAP mode) or the Windows/Active Directory user Jenkins is running as (ADSI mode).

Active Directory Plugin 2.25.1 adds an option to only connect to Active Directory via TLS/SSL to both modes (ADSI and LDAP). This option is enabled by default for new installations and is now the recommended way to enforce TLS/SSL for connections to Active Directory. Unlike the existing StartTLS option for the LDAP-based mode, it will not proceed using an insecure connection if establishing a TLS/SSL connection fails.

Administrators upgrading from previous versions of the plugin will be shown a warning on the Jenkins UI requesting they update the plugin configuration unless the (now otherwise obsolete) flag `hudson.plugins.active_directory.ActiveDirectorySecurityRealm.forceLdaps` was set to `true`.

Note

The plugin exposes configuration of the ADSI flags implementing the TLS/SSL requirement via the system properties `hudson.plugins.active_directory.ActiveDirectoryAuthenticationProvider.ADSI_FLAGS_OVERRIDE` and `hudson.plugins.active_directory.ActiveDirectoryAuthenticationProvider.ADSI_PASSWORDLESS_FLAGS_OVERRIDE`. See the plugin documentation for further details.

Note

Care needs to be taken when reconfiguring the security realm to not accidentally lock yourself out. See the documentation for advice how to resolve this problem if it occurs.

**Non-constant time token comparison in Configuration as Code Plugin**

**SECURITY-2141 / CVE-2022-23106**

Configuration as Code Plugin 1.55 and earlier does not use a constant-time comparison when checking whether two authentication tokens are equal.

This could potentially allow attackers to use statistical methods to obtain a valid authentication token.

Configuration as Code Plugin 1.55.1 now uses a constant-time comparison when validating authentication tokens.

**Path traversal vulnerability in Warnings Next Generation Plugin**

**SECURITY-2090 / CVE-2022-23107**

Warnings Next Generation Plugin 9.10.2 and earlier does not restrict the name of a file when configuring a custom ID.

This allows attackers with Item/Configure permission to write and read specific files with a hard-coded suffix on the Jenkins controller file system.

Warnings Next Generation Plugin 9.10.3 checks for the presence of prohibited directory separator characters in the custom ID.

**Stored XSS vulnerability in Badge Plugin**

**SECURITY-2547 / CVE-2022-23108**

Badge Plugin allows adding custom build badges with a custom description and optionally a link to a URL.

Badge Plugin 1.9 and earlier does not escape the description and does not check for allowed protocols when creating a badge.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

Badge Plugin 1.9.1 escapes the description and check for allowed protocols when creating a badge.

**Improper credentials masking in HashiCorp Vault Plugin**

**SECURITY-2213 / CVE-2022-23109**

Pipelines display commands executed in their Pipeline step descriptions and their output in build logs. To mask sensitive output, Pipeline: Groovy Plugin 2.84 and earlier specified an allowlist of known non-sensitive variables and masked everything else. This caused problems, so Pipeline: Groovy Plugin 2.85 and newer expects pipeline steps to explicitly specify that variables are to be treated as sensitive and should be removed from output.

HashiCorp Vault Plugin 3.7.0 and earlier relied on the previous behavior and did not explicitly declare variables as sensitive or redacted them.

This can result in exposure of Vault credentials in Pipeline build logs and Pipeline step descriptions.

HashiCorp Vault Plugin 3.8.0 explicitly masks Vault credentials in build logs and Pipeline step descriptions.

This fix only applies to new builds. Administrators are advised to review build logs and Pipeline metadata files created before HashiCorp Vault Plugin 3.8.0 for the presence of Vault credentials.

**Stored XSS vulnerability in Publish Over SSH Plugin**

**SECURITY-2287 / CVE-2022-23110**

Publish Over SSH Plugin 1.22 and earlier does not escape the SSH server name.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Overall/Administer permission.

As of publication of this advisory, there is no fix.

**CSRF vulnerability and missing permission checks in Publish Over SSH Plugin**

**SECURITY-2290 / CVE-2022-23111 (CSRF), CVE-2022-23112 (missing permission check)**

Publish Over SSH Plugin 1.22 and earlier does not perform permission checks in methods implementing connection tests.

This allows attackers with Overall/Read access to connect to an attacker-specified SSH server using attacker-specified credentials.

Additionally, these connection tests methods do not require POST requests, resulting in a cross-site request forgery (CSRF) vulnerability.

As of publication of this advisory, there is no fix.

**Path traversal vulnerability in Publish Over SSH Plugin**

**SECURITY-2307 / CVE-2022-23113**

Publish Over SSH Plugin 1.22 and earlier performs a validation of the file name specifying whether it is present or not.

This results in a path traversal vulnerability allowing attackers with Item/Configure permission to discover the name of the Jenkins controller files.

As of publication of this advisory, there is no fix.

**Password stored in plain text by Publish Over SSH Plugin**

**SECURITY-2291 / CVE-2022-23114**

Publish Over SSH Plugin 1.22 and earlier stores password unencrypted in its global configuration file `jenkins.plugins.publish_over_ssh.BapSshPublisherPlugin.xml` on the Jenkins controller as part of its configuration.

This password can be viewed by users with access to the Jenkins controller file system.

As of publication of this advisory, there is no fix.

**CSRF vulnerability in batch task Plugin**

**SECURITY-1025 / CVE-2022-23115**

batch task Plugin 1.19 and earlier does not require POST requests for several HTTP endpoints, resulting in cross-site request forgery (CSRF) vulnerabilities.

These vulnerabilities allow attackers with Overall/Read access to retrieve logs, build or delete a batch task.

As of publication of this advisory, there is no fix.

**Agent-to-controller security bypass in Conjur Secrets Plugin allows decrypting secrets**

**SECURITY-2522 (1) / CVE-2022-23116**

Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows agent processes to obtain the plain text of any attacker-provided encrypted secret.

This allows attackers able to control agent processes to decrypt secrets stored in Jenkins obtained through another method.

As of publication of this advisory, there is no fix.

**Agent-to-controller security bypass in Conjur Secrets Plugin allows retrieving all credentials**

**SECURITY-2522 (2) / CVE-2022-23117**

Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows agent processes to obtain all username/password credentials (Credentials Plugin) stored on the Jenkins controller.

This allows attackers able to control agent processes to retrieve those credentials.

As of publication of this advisory, there is no fix.

**Agent-to-controller security bypass in Debian Package Builder Plugin**

**SECURITY-2546 / CVE-2022-23118**

Debian Package Builder Plugin 1.6.11 and earlier implements functionality that allows agent processes to invoke command-line `git` at an attacker-specified path on the controller.

This allows attackers able to control agent processes to invoke arbitrary OS commands on the controller.

As of publication of this advisory, there is no fix.

**Severity**

*   SECURITY-1025: Medium
*   SECURITY-1389: Medium
*   SECURITY-1624: Low
*   SECURITY-1878: High
*   SECURITY-2017: High
*   SECURITY-2033: Medium
*   SECURITY-2090: Medium
*   SECURITY-2141: Low
*   SECURITY-2163: Medium
*   SECURITY-2189: Medium
*   SECURITY-2213: Medium
*   SECURITY-2287: Medium
*   SECURITY-2290: Medium
*   SECURITY-2291: Low
*   SECURITY-2307: Medium
*   SECURITY-2342: Low
*   SECURITY-2467: High
*   SECURITY-2522 (1): Medium
*   SECURITY-2522 (2): Medium
*   SECURITY-2546: High
*   SECURITY-2547: High
*   SECURITY-2558: Medium

**Affected Versions**

*   Jenkins weekly up to and including 2.329
*   Jenkins LTS up to and including 2.319.1
*   **Active Directory Plugin** up to and including 2.25
*   **Badge Plugin** up to and including 1.9
*   **batch task Plugin** up to and including 1.19
*   **Bitbucket Branch Source Plugin** up to and including 737.vdf9dc06105be
*   **Configuration as Code Plugin** up to and including 1.55
*   **Conjur Secrets Plugin** up to and including 1.0.9
*   **Credentials Binding Plugin** up to and including 1.27
*   **Debian Package Builder Plugin** up to and including 1.6.11
*   **Docker Commons Plugin** up to and including 1.17
*   **HashiCorp Vault Plugin** up to and including 3.7.0
*   **Mailer Plugin** up to and including 391.ve4a\_38c1b\_cf4b\_
*   **Matrix Project Plugin** up to and including 1.19
*   **Metrics Plugin** up to and including 4.0.2.8
*   **Publish Over SSH Plugin** up to and including 1.22
*   **SSH Agent Plugin** up to and including 1.23
*   **Warnings Next Generation Plugin** up to and including 9.10.2

**Fix**

*   Jenkins weekly should be updated to version 2.330
*   Jenkins LTS should be updated to version 2.319.2
*   **Active Directory Plugin** should be updated to version 2.25.1
*   **Badge Plugin** should be updated to version 1.9.1
*   **Bitbucket Branch Source Plugin** should be updated to version 746.v350d2781c184
*   **Configuration as Code Plugin** should be updated to version 1.55.1
*   **Credentials Binding Plugin** should be updated to version 1.27.1
*   **Docker Commons Plugin** should be updated to version 1.18
*   **HashiCorp Vault Plugin** should be updated to version 3.8.0
*   **Mailer Plugin** should be updated to version 408.vd726a\_1130320
*   **Matrix Project Plugin** should be updated to version 1.20
*   **Metrics Plugin** should be updated to version 4.0.2.8.1
*   **SSH Agent Plugin** should be updated to version 1.23.2
*   **Warnings Next Generation Plugin** should be updated to version 9.10.3

These versions include fixes to the vulnerabilities described above. All prior versions are considered to be affected by these vulnerabilities unless otherwise indicated.

As of publication of this advisory, no fixes are available for the following plugins:

*   batch task Plugin
*   Conjur Secrets Plugin
*   Debian Package Builder Plugin
*   Publish Over SSH Plugin

**Credit**

The Jenkins project would like to thank the reporters for discovering and reporting these vulnerabilities:

*   **Daniel Beck, CloudBees, Inc.** for SECURITY-2033, SECURITY-2522 (1), SECURITY-2522 (2), SECURITY-2546
*   **Devin Nusbaum, CloudBees, Inc.** for SECURITY-2467
*   **James Nord, CloudBees, Inc.** for SECURITY-2141
*   **Jasen Minton** for SECURITY-2213
*   **Kevin Guerroudj** for SECURITY-2287
*   **Kevin Guerroudj, CloudBees, Inc.** for SECURITY-2547
*   **Kevin Guerroudj, CloudBees, Inc. and Wadeck Follonier, CloudBees, Inc.** for SECURITY-2558
*   **Kevin Guerroudj, Justin Philip and Marc Heyries** for SECURITY-2307
*   **Marc Heyries, Justin Philip and Kevin Guerroudj** for SECURITY-2290, SECURITY-2291
*   **Matt Sicker, CloudBees, Inc.** for SECURITY-2163
*   **Oleg Nenashev** for SECURITY-1025
*   **Tomasz Szuba** for SECURITY-1878
*   **Wadeck Follonier, CloudBees, Inc.** for SECURITY-2017, SECURITY-2090
*   **Wasin Saengow** for SECURITY-1624

CVE-2022-23118: Jenkins Security Advisory 2022-01-12

Jenkins Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows attackers able to control agent processes to retrieve all username/password credentials stored on the Jenkins controller.

CVE-2022-23117: Jenkins Security Advisory 2022-01-12

Jenkins Conjur Secrets Plugin 1.0.9 and earlier implements functionality that allows attackers able to control agent processes to decrypt secrets stored in Jenkins obtained through another method.

CVE-2022-23116: Jenkins Security Advisory 2022-01-12

Cross-site request forgery (CSRF) vulnerabilities in Jenkins batch task Plugin 1.19 and earlier allows attackers with Overall/Read access to retrieve logs, build or delete a batch task.

CVE-2022-23115: Jenkins Security Advisory 2022-01-12

Jenkins Publish Over SSH Plugin 1.22 and earlier stores password unencrypted in its global configuration file on the Jenkins controller where it can be viewed by users with access to the Jenkins controller file system.

CVE-2022-23114: Jenkins Security Advisory 2022-01-12

Jenkins HashiCorp Vault Plugin 3.7.0 and earlier does not mask Vault credentials in Pipeline build logs or in Pipeline step descriptions when Pipeline: Groovy Plugin 2.85 or later is installed.

CVE-2022-23109: Jenkins Security Advisory 2022-01-12

Jenkins Badge Plugin 1.9 and earlier does not escape the description and does not check for allowed protocols when creating a badge, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

CVE-2022-23108: Jenkins Security Advisory 2022-01-12

Jenkins Warnings Next Generation Plugin 9.10.2 and earlier does not restrict the name of a file when configuring custom ID, allowing attackers with Item/Configure permission to write and read specific files with a hard-coded suffix on the Jenkins controller file system.

Tag

#debian