CVE-2020-28653: Read me | OpManager Help

OpManager v12.5****Build No 125630 - April 15, 2022

• General : For enhanced security, Two factor authentication has been made mandatory.
• General : Earlier, there were few vulnerabilities while resetting a password using forgot password option. These have been fixed now.
• General : During installation with MSSQL AD authentication, there were issues with the login, if the password had special characters such as "* (or) ~ (or) ?". It has been fixed now.
• General : PostgreSQL has now been updated to version 10.20.
• General : The PostgreSQL vulnerability issues from version 10.16 have now been fixed.
• OpManager : Application tab now allows users to download, install and readily setup APM plug-in by clicking on a button.
• OpManager : Mail server settings for APM plugin can now be synced from the Mail server settings page under OpManager.
• OpManager : If APM plugin is accessed through OpManager even before the completion of the initial sync process, a blank screen is displayed. Proper messages have been introduced on to this screen now.
• OpManager : The frequent rise of credential failure alerts by Data Collection Manager (DCM) in vCenter and VMware ESXi devices due to the restriction of single active session from an IP has been fixed.
• OpManager : When vCentre devices were discovered, the device type was identified to be unknown. This has been fixed now.

Build No 125629 - April 08, 2022

• OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now.(Reported by Anh Vu)

Build No 125628 - April 07, 2022

• OpManager : A new feature named Root Cause Analysis has been introduced in the product. It offers a centralized platform to visualize and analyze monitoring data of multiple network components to accelerate root cause identification.
• OpManager : Introduced support for V3 Admin APIs since V1 Admin APIs are deprecated on ServiceDesk Plus from version 13000.
• OpManager : The availability percentage value for devices and interfaces in advanced reports and reports generated via report builder (Inventory -> Devices/Interfaces -> Generate Report) will now be displayed with decimal values.
• OpManager : The child groups will no longer be visible in the group list under ‘Group by Groups’ option in the Inventory’s Tree View filter and Dashboard’s Tree View widget.
• OpManager : Optimization has been done to the ‘Group by Groups’ option under Inventory’s Tree View filter and Dashboard’s Tree View widget for improved loading time.
• OpManager : When a workflow is configured to delete an alarm, the status of the alarm is updated with the same severity instead of 'Clear’. This issue has been fixed.
• OpManager MSP: You can now manage, unmanage and delete devices and interfaces in bulk from the Inventory page.
• Enterprise Edition: From Now, The System Info page under System Performance in the Central gives visibility into the load received each Probe.

Build No 125617 - April 01, 2022

• General : While upgrading to versions 12.5.613 and above, the configured rebranding settings were not retained post upgrade due to a change in the Login page’s background image. This issue has been fixed now.
• OpManager : In Advanced reports, additional fields have been newly added to view the Latest Notes, Latest Notes Updated Time and Latest Notes Added by data for Alarms.
• OpManager : From now, the Availability (%) monitor will be listed under Apply Criteria for filtering advanced reports.
• OpManager MSP : PPM upgrade failure due to NCM add-on data has been fixed now.
• Enterprise Edition : From version 12.5.584 users had issues accessing the support diagnostics page. This issue has been fixed now.

Build No 125616 - March 26, 2022

• OpManager : The SQL injection vulnerability issues in multiple inventory reports have been fixed.(Reported by Anh Vu. Refer: CVE-2022-27908) .
• OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now.

Build No 125615 - March 24, 2022

• General: Log4j has been upgraded to version 2.17.2.
• Enterprise Edition: When a Probe starts after the Central upgrade is completed, the status of that Probe is not updated in the Smart Upgrade page of the Central server. This issue was noticed from OpManager build version 125448. It has been fixed now.

Build No 125614 - March 21, 2022

• General: ServiceDesk Plus MSP version 10600 is now compatible with OpManager/OpManager MSP.
• OpManager: The Data Collection Manager didn’t resume polling when interfaces were managed from the interface template page. This has been fixed now.
• OpManager: The occurrence of unauthorized access events during scheduled credential checks by data collection manager for APC UPS devices, has been fixed now.
• OpManager: The monitor display names were not translated properly in the installation languages during the threshold alerts. This has been fixed now.
• OpManager: When OpManager is unable to resolve the localhost, data archiving failed or faulty alerts were generated. This has been fixed now.
• OpManager: Renamed the Dashboard, MonitorGroups, APMInsight, EUM and Admin subtabs under the Application tab to Home, Monitors, APM, User Experience and settings, respectively.
• OpManager: Removed the subtabs ERP, MessageSystems, DatabaseServers, WebServers and ApplicationServers under the Application tab and brought them under the monitor tab as categories.
• OpManager: The change in the IPMI device category during scheduled discovery has now been fixed.
• OpManager: The change in the severity of an IPMI sensor threshold alarm from high to low was not being updated. This has been fixed now.
• OpManager: String values were obtained for the IBM fan sensor OID in IPMI. This has been fixed now by retrieving numeric value from the obtained String.
• OpManager: When the IPMI sensor exceeded its last polling date by more than the specified time frame, it was not being deleted. This has been fixed now.
• OpManager: The IPMI data collection was affected due to the return of unconfigured status values from the devices. This has been fixed now.
• OpManager: The XSS vulnerability issues in the device snapshot tab (Monitors, Installed software, Hardware, AD, Exchange, Virtual Info and IPMI Summary) & Diagnostics page have been fixed.
• OpManager: The XSS vulnerability issues in the settings monitoring(Performance, Application, Windows services, Process, File, Folder, Agents, Service, URL, Eventlog and Script monitors) page have been fixed.
• OpManager: The XSS Vulnerability issues in the Dashboard Widgets(Monitors Summary Widget, Virtualization widgets, AD/MSSQL/Services/Processes/Windows Services by Availability, Services by Downtime, Last Polled Value of a Performance Monitor) have been fixed.
• OpManager: The XSS vulnerability issues in Maps - Layer2, Rack and Floor list views, Device Snapshot - Business view list and Inventory - Groups list view pages have been fixed now.

Build No 125613 - March 15, 2022

• General : The NOC screen was blank after the refresh interval in certain instances. This issue has been fixed now.
• General : When upgrading to versions 12.5.399 and above, User Role migration failed due to missing user property entries in DB. This issue has now been fixed.
• General : After upgrading to versions 12.5.415 and above, AD and Radius User login failed due to an unused System Property. This issue has now been fixed.
• General : The ‘Learn more’ hyperlink in IDP Configuration under SAML Authentication tab has been updated now.
• General : Since the NameId formats in SAML Authentication are technical terms, they can only be displayed in English.
• General : jQuery has been upgraded to version 3.6.0 in order to avoid vulnerabilities.
• General : jQuery UI has been upgraded to version 1.13.1 in order to avoid vulnerabilities.
• General : To restrict the installation of unknown patches in the applications, it is mandatory to import the Certificate while upgrading.
• General : Earlier there was a possibility of a vulnerability issue while verifying the patch integrity. The issue has been fixed now.
• OpManager MSP : Previously there was an issue while applying license from the command prompt. This issue has been fixed.

Build No 125612 - March 09, 2022

• OpManager: Support for Wireless LAN Controller (WLC) monitoring is added for the following device types: Ruckus ZD Controller, Ruckus SZ Controller.
• OpManager: Previously, business view users and users without group read permission were able to view all groups via the Inventory’s Tree View filter and Tree View widget. This issue has been fixed now.
• OpManager: For non-English language installations, there were issues with the downtime scheduler page when the ‘Monthly’ filter (with ‘Day’ option) was chosen. This issue has been fixed now.
• OpManager: For non-English language installations, when exporting ‘Health and Availability’ reports, ‘All devices’ option was auto-selected even when a specific category was chosen in the ‘Category’ filter. This issue has been fixed now.
• OpManager: The Device Availability chart under ‘At-a-glance’ report was incorrectly fetching the present day’s data when custom time period was chosen. This issue has been fixed now.
• OpManager: Previously, there were data collection issues in the ‘Device Availability’ dashboard report and ‘Availability Statistics’ widgets (under Business View and Category dashboards) when multiple archive tables were queried. This issue existed in OpManager with MSSQL installations and it has been fixed now.
• OpManager: Previously, round-off value was shown for availability percentage in the Availability Statistics graphs (under Network -> Dashboard view, and Business view dashboard). This value can now be configured to be displayed with two decimal values.
• OpManager: Redirection to the corresponding device snapshot page is now provided in the ‘Top-N-Least available’ charts.
• OpManager: The XSS vulnerability issues in Device Template, Device Categories and Discovery modules have been fixed now.
• OpManager: In the Probe setup, there was an issue with loading the floor view for the first time after a 3D floor view is created. This issue has been fixed.
• OpManager Plus: Previously, the Inventory tab was visible even when the Monitoring (OPM) module was disabled. This issue has been fixed now.
• OpManager Plus: Previously, the Discovery section under Settings was visible even when the Monitoring (OPM) module was disabled. This has been fixed now.
• OpManager MSP: In MSP Central, unauthorized users were able to view the groups of all customers via ‘Tree View’ widget under custom dashboard. This issue has been fixed now.
• NCM: In OPM installation, IP Address will now be updated automatically in NCM when an IP update happens in OPM.
• NCM: Multiple XSS vulnerabilities have been fixed in Change Notification, Credential Profile, Compliance, Show commands, Label management and Terminal Pages.

Build No 125611 - March 07, 2022

• General : The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.

• General : JFreeChart jar has been upgraded to version 0.9.19.

• General : JCommon jar has been upgraded to version 0.9.4.

• General : Tasks not supported in NCM have been deprecated in NCM’s workflow.

• General : Alarm Criteria that are not part of NCM have been deprecated in NCM’s workflow.

Build No 125603 - April 07, 2022

• OpManager : The SQL injection vulnerability issues in multiple inventory reports have been fixed.(Reported by Anh Vu. Refer: CVE-2022-27908).
• OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now

Build No 125601 - March 10, 2022

• General: The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.
• General: When upgrading to a version 12.5.399 and above, User Role migration failed due to missing user property entries in DB. This issue has now been fixed.

Build No 125599 - February 25, 2022

• OpManager: Introduced a new VMware monitor that customers can use to monitor the disk space of their VMware Virtual Machines provided the necessary VMware tools are installed in the VM.
• OpManager: When data processing was done for vmwareevents.xml during the upgrade of the enterprise setup, the upgrade failed if any changes were done to the default VMWare events in the pre-upgrade set-up. This has been fixed now.
• OpManager: The XSS vulnerability issues in the mib file names, Add WMI pages under the settings and device template pages, and the “Device Count” column under Settings -> Monitoring -> Pages have now been fixed.

Build No 125598 - February 21, 2022

• General : Support for SAML 2.0 based authentication is now provided. Users can now login via SAML Single Sign-On service once the Identity Provider (IdP) details are configured.
• General : The authentication configuration settings are now grouped under a new section named ‘Authentication’ under General Settings.
• General : The login page UI is now optimized for better user experience.
• General : Pass-Through authentication is being deprecated and will be removed in one of the future releases before 2023. Users who have already configured Pass-Through authentication will not have any impact for now and new users will not be allowed to configure the same.
• NCM: REST API based configuration management support has now been added for HPE Aruba OS devices.
• NCM: Users can now configure the syslog change detection status from UI.
• NCM: Earlier, there was an issue while loading settings page in MSP Central when a role user is created with NCM add on. It has been fixed now.

Build No 125597 - February 14, 2022

• OpManager: The ‘getVPNTunnelDetails’ API has been removed. As an alternate, you can use ‘getVPNDetails’ API to fetch VPN details.
• OpManager: The ‘GMapDetails’ API has been removed. As an alternate, you can use ‘getMapProperties’ API to get maps properties.
• OpManager: Previously, users were unable to add IP SLA monitors when the size of the ‘Application version’ value exceeded the character limit of 50. This issue has been fixed now.
• OpManager: The data collection polling of Switch Stack devices has now been optimized to avoid high memory usage.
• OpManager: Previously, the down severity status for UPS devices were not cleared even when the device was up again. This issue has been fixed now.
• OpManager: Network Path Analysis is now supported in the OpManager’s Enterprise Edition for Windows installations.
• OpManager: Previously, the Operator users were restricted from updating the ‘Reason’ column under Outage History in the Device Snapshot page. This issue has been fixed now.
• OpManager: Previously, the threshold for ‘VPN Tunnel Status’ monitor was not configured by default if the monitor was associated manually (by using ‘Add monitor’ or ‘Associate’ option) from the Performance Monitors page. This issue has been fixed now.
• OpManager: Previously, the VPN widgets were incorrectly displayed in the device snapshot page for devices that doesn’t support site-to-site VPN monitoring. This issue has been fixed now.
• OpManager: Previously, the threshold settings were not disabled for VPN Tunnel status monitors. This issue has been fixed now.
• OpManager: Previously, the Start/Stop text in the ‘Action’ column of WLC’s Access Points widget was overlapped with garbled characters. This issue has been fixed now.
• OpManager: The XSS vulnerability issues in the Vendor Templates page have been fixed now.
• OpManager: Previously, garbled characters were displayed along with the threshold values of Utilization, Error and Discard monitors in the ‘Applying Interface Template’ page. This issue has been fixed now.
• OpManager: In the device snapshot page, the help message was not displayed for devices with ‘Unknown’ device type or when the device was added into OpManager in ‘Not monitored’ state. This issue has been fixed now.
• OpManager: Previously, the users with only discovery write access were unable to add devices from the ‘Add Device’ page or access the snapshot page of router devices. This issue has been fixed now.

Build No 125588 - April 07, 2022

• OpManager : The SQL injection vulnerability issues in multiple inventory reports have been fixed.(Reported by Anh Vu. Refer: CVE-2022-27908).
• OpManager : The SQL injection vulnerability issues identified in a few default reports have been fixed now

Build No 125587 - March 22, 2022

• OpManager MSP: PPM Upgrade failure due to NCM Addon data, has been fixed now.
• Enterprise Edition : PPM Upgrade failure from OpManager Enterprise Edition setup older than 123205 to latest, has been fixed

Build No 125586 - March 10, 2022

• General: The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.
• General: When upgrading to a version 12.5.399 and above, User Role migration failed due to missing user property entries in DB. This issue has now been fixed.

Build No 125585 - February 03, 2022

• OpManager : A device will be automatically added in Trap Settings, when that device is discovered through the trap discovery option.
• OpManager : As per the customer request, the alarm severity for cleared alarms in Spanish has been changed from ‘Borrar’ to 'Normal’.
• OpManager :When a report in graphical format was exported using the report builder option, the report data in PDF did not match with the UI report. This issue has been fixed.
• OpManager :The data in the availability reports generated for the configured Business Hour was incorrect. This issue has been fixed.
• OpManager :When the category of a report is changed and exported, the data in the report was incorrect for all languages except English. This issue has been fixed.
• OpManager :A scheduled report showed data of the default category, although the category was changed into ‘All devices’ while scheduling the report. This issue has been fixed.
• OpManager :Previously, UPS devices was not shown in advanced reports. This issue has been fixed.
• OpManager :The monitoring data for the interface Total Utilization Percentage was not shown, when a report was created using the Advanced Reports feature. This issue was noticed from OpManager build versions from 125416, it has been fixed now.
• OpManager :Report Builder does not show data when the time period selected is large. This issue was noticed in OpManager builds after 125437, it has been fixed now.
• OpManager :The invalid mailMsg parameter issue noticed in the mail message of schedule reports for Japanese and Chinese languages has been fixed.
• OpManager :When a tabular report for devices was created based on monitors or instance using the Report Builder option, the exported XLS file did not have the data. This issue has been fixed now.
• OpManager :The invalid parameters issue noticed in the Name of scheduled reports has been fixed.
• OpManager :Previously, when the data size of a particular field in an advanced report was large, the data for that field was generated in an unreadable format. This issue which was seen in MSSQL DB has been fixed now.
• OpManager :When the monitor name in an advanced report contains some special characters, the data for that monitor was not shown. This has been fixed now.
• OpManager :From OpManager builds 125399, the option to export the Integrated Reports (tabular report) in XLS format was not shown in UI due to an issue. The issue is fixed now and users can now export reports in XLS format.
• OpManager: A new action ‘Associate Custom Field’ has been added to the Discovery Rule Engine. You can now associate custom fields to devices during discovery.
• OpManager : HighPerf add-on is now supported in the NetFlow Analyzer add-on in OpManager, OpManager Enterprise Edition, and OpManager Plus.
• OpManager : OpManager, OpManager Enterprise Edition, and OpManager Plus now offer support for it’s NFA add-ons’ old HighPerf data migration into new HighPerf (CStore) database.
• OpManager Storage Monitoring :Storage monitoring add-on banner message was shown in the UI even after a user purchased storage monitoring license. This issue has been fixed.
• OpManager Storage Monitoring :Cisco MDS devices models were not discovered when SNMP v3 credential was configured for discovery. This issue has been fixed.
• OpManager Storage Monitoring :The Compellent Capacity device model will be monitored using SNMP if the SNMP credential is configured for polling the device.
• OpManager Storage Monitoring :There was an issue while discovering Huawei storage devices and the device model name in the snapshot page also mismatched. Both the issues have been fixed.
• OpManager Storage Monitoring :Updating SNMP v3 credentials for storage device is failed. This issue has been fixed.
• OpManager Storage Monitoring :In Linux environment, while exporting a report in PDF, the device names were broken. This issue has been fixed.
• OpManager Storage Monitoring :Disk count of EMC Unity and EMC Symmetrix storage devices shown in the snapshot page was incorrect. This mismatch has been fixed now.
• OpManager Storage Monitoring :OpManager now extends storage monitoring support to HPE XP7 and HPE XP8 device models.
• OpManager Storage Monitoring :Certain monitors have been added in the default device templates of HPE Nimble and HPE Primera.
• Enterprise Edition : The status of the standby probe was not updated in the Probe details page of the Central server. This issue was noticed in OpManager build versions from 125448, it has been fixed now.

Build No 125584 - February 01, 2022

• General: While submitting a username using the ‘Enter’ key in the Forgot Password option, an error occurred. This has been fixed.
• General: Previously, global search brought in results from all categories irrespective of the user role. This issue has been fixed.
• General: Previously, the ‘Reset TOTP’ option disappeared from the user list (in user management page) when navigated to subsequent pages or if the list was sorted. This issue has been fixed.
• OpManager: In a triggered notification profile, the “SNMP Enabled” variable’s value was in English instead of the installed language. This has been fixed.
• OpManager: The ‘Mute for all users’ and ‘Delete for all users’ options available under Alarms -> Web Alarms ->Actions, have been removed.
• Enterprise Edition: An irrelevant warning message was shown in the license activation page of Probes with exceeded number of access points. This issue has been fixed.
• NCM: Earlier, there was a stored XSS vulnerability in the Schedule name field of Schedule page, reported by Hazem Osama. This has been fixed. (Refer CVE-2022-24703).
• NCM: Earlier, there was a stored XSS vulnerability in the Change rule name field of Change Notification page. This has been fixed.

Build No 125583 - January 24, 2022

• OpManager: OpManager now offers support for monitoring of Windows Server 2022 and Windows 11.
• OpManager: OpManager’s hardware monitoring now provides new vendor support for Cisco ASR/ASA/ISR and HP Switch vendors.
• OpManager The issue with discovering localhost as HyperV Host has now been fixed.
• OpManager: There was issue with VM power State and Connection State value update during VMware discovery or Update inventory call if improper values were received for those params. This has been fixed now
• OpManager: Fixed an issue related to reverting adaptive thresholds from the monitor settings page.
• OpManager: Optimized the Database operations performed during VMware update inventory action for better performance.
• OpManager: Introduced CPU and Memory columns in default servers list page that can be used to retrieve the most recent CPU and memory utilization values.
• OpManager: The page loading/freezing issue while refreshing the Monitors Tab from Device Snapshot Page has now been fixed.
• OpManager: In OpManagerAgent, the network bandwidth usage was increased during data file transfer when OpManager was in maintenance or down state. This issue has been fixed now.
• OpManager: For improved performance, web socket communication mode is now enabled as default for agent-server communication in agent based monitoring devices.
• OpManager: The false device availability alerts raised for agent based monitoring devices has now been fixed.
• OpManager: In order to decrease network traffic usage, the default communication interval for agent-server communication is increased to 30 seconds. (This is applicable only for PULL_MODEL request mode.)
• OpManager: The HTTP requests for export related API’s (generateMonitorAvailabilityXLS, getExportDataForJson, exportScriptTemplate, exportAvailabilityGraphData) have been changed from GET to POST.
• NCM: Multiple stored XSS vulnerabilities have been fixed in compliance and device template modules.
• NCM: Multiple low privilege escalation vulnerabilities have been fixed in compliance and firmware vulnerability modules.
• NCM: Now user can remove device(s) from config management in the Device-based licensing model for OpManager Plus installation.

Build No 125582 - January 17, 2022

• Opmanager: Introduced a security feature called “File Integrity” that allows you to scan for any threat files or tampered files in your OpManager-installed directory.

Build No 125581 - January 13, 2022

• OpManager: Previously, the SSID count was updated instead of Client count in the WLC controller’s Clients tab on clicking the refresh icon. This issue has been fixed now.
• OpManager: While adding or editing a Business View, garbled characters were displayed in the device list (when a filter from the left pane was chosen) for devices that had special characters in the display name. This issue has been fixed now.
• OpManager: Redirection issues with the Business View Summary widget has been fixed now.
• OpManager: Previously, an error message (Rack Name already exists) was thrown when the users tried to edit the background color or tile color in the 3D Floor View. This issue has been fixed now.
• OpManager: Previously, the ‘Last Connected Time’ for VPN Tunnels were incorrect for Cisco and Fortinet firewall devices. This issue has been fixed now.
• OpManager: Previously, it was unable to add Meraki Organization if the organization name had an empty space at the start or end. This issue has now been fixed.
• OpManager: Previously, incorrect data was displayed in the ‘Last Polled Time’ section for Clients (in Meraki Radio) and ‘Detected Time’ section for Rogue SSIDs (in Meraki Controller). This issue has been fixed now.
• OpManager: In Data Collection Manager, the Test Credential action failed for a few SNMPv3 devices intermittently due to timed out requests. This issue has been fixed now.
• OpManager: Loading issues with the Meraki snapshot widgets have been fixed now.
• OpManager: Previously, the UPS devices were not listed in the device details report (when the module type is selected as ‘Device’) generated from Advanced Report page. This issue has been fixed now.
• OpManager: A new column ‘Monitoring Interval’ to fetch Availability monitoring interval, has been added under General Properties for module type ‘Device’ in the Advanced Reports page.
• OpManager: If a Device downtime scheduler is started when another scheduler is in-progress of either starting or ending its task, the devices under former downtime scheduler will not be moved to maintenance (Unmanaged) state. This issue has now been fixed.
• OpManager: From OpManager builds 125559, users with business view scope were unable to access the Interface Bandwidth report from the interface snapshot page. This issue has been fixed now.
• OpManager MSP: From OpManager builds 125559, users were unable to view the Subnets list view page (under Inventory tab) in the MSP Probe webclient. This issue has been fixed now.
• OpUtils: There was an XSS vulnerability issue in the subnet details of subnets monitored using IP Address Manager, as reported by Hazem. This issue has been fixed.

Build No 125568 - February 24, 2022

• General: The upgrade process failed in secondary failover setup due to an issue. This issue occurs when upgrading from builds below 125561. This issue has been fixed.
• Enterprise Edition: An irrelevant warning message was shown in the license activation page of Probes with exceeded number of access points. This issue has been fixed.

Build No 125567 - February 23, 2022

• NCM : Earlier, there was a stored XSS vulnerability in the Schedule name field of Schedule page, reported by Hazem Osama. This has been fixed.
• NCM : Earlier, there was a stored XSS vulnerability in the Change rule name field of Change Notification page. This has been fixed.

Build No 125566 - February 23, 2022

• OpManager: While creating discovery schedule, users were unable to add more than one email address in the ‘Email Notification’ section. This issue has been fixed now.OpManager: Loading issues with the Meraki snapshot widgets have been fixed now.
• OpManager: If a Device downtime scheduler is started when another scheduler is in-progress of either starting or ending its task, the devices under former downtime scheduler will not be moved to maintenance (Unmanaged) state. This issue has now been fixed.
• OpManager: From OpManager build version 125415, traps without the agent address were received from devices that were not configured in the Trap Settings. This issue has been fixed now.
• OpManager: The page loading/freezing issue while refreshing the Monitors Tab from Device Snapshot Page has now been fixed.
• OpManager: From OpManager builds 125399, the option to export the Integrated Reports (tabular report) in XLS format was not shown in UI due to an issue. The issue is fixed now and users can now export reports in XLS format.
• OpManager: When a tabular report for devices was created based on monitors or instance using the Report Builder option, the exported XLS file did not have the data. This issue has been fixed now.
• OpManager: The monitoring data for the interface Total Utilization Percentage was not shown, when a report was created using the Advanced Reports feature. This issue was noticed from OpManager build versions from 125416, it has been fixed now.
• OpManager: Report Builder does not show data when the time period selected is large. This issue was noticed in OpManager builds after 125437, it has been fixed now.
• OpManager: Exporting graphical reports created using the Report Builder option failed due to an issue in the API parameters. This has been fixed now.
• OpManager: From OpManager builds 125559, users with business view scope were unable to access the Interface Bandwidth report from the interface snapshot page. This issue has been fixed now.
• OpManager MSP: From OpManager builds 125559, users were unable to view the Subnets list view page (under Inventory tab) in the MSP Probe webclient. This issue has been fixed now.
• Enterprise Edition : There was an issue in updating the status of the standby probe in the Central. This issue was noticed in OpManager build versions from 125448, it has been fixed now.
• OpUtils : There was an XSS vulnerability issue in the subnet details of subnets monitored using IP Address Manager, as reported by Hazem. This issue has been fixed.

Build No 125565 - January 07, 2022

• General: Previously, Password reset logic was predictable as reported by HaYiCle. This has now been updated to enhance security.
• General: Unused entries in the web application deployment descriptor have been removed.
• General: To improve security and prevent vulnerabilities, certain enhancements have been implemented in the product.
• General: Unprivileged users were able to access end points of multiple modules. This has now been fixed.
• General: The monitor performance graphs in the System Performance module failed to display the dates along with time in the X-axis. This issue has been fixed now.
• General: Users were unable to save the configured Client Settings available under System Settings as an unsupported date and time format given. This issue has been resolved.
• General: The API response to the Edit widget option in the Dashboard has been modified.
• OpManager: The ‘Add Category’ option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.
• OpManager: A column mismatch issue was witnessed while exporting PDF/XLS files (with the ‘Sort by top/bottom filter’ enabled) in the following reports - All Interfaces Availability, Services Monitor Availability, WAN Link Availability, Process Monitor Availability, Windows Service Monitor Availability reports. This has now been fixed.
• OpManager: Interface graphs were displaying data from the raw table instead of hourly table in the scheduled report or the exported PDF. This issue has now been fixed now.
• OpManager: In some cases, the OpManager upgrade failed due to an issue with discovery profile name duplication. This has been fixed now.
• OpManager: The SQL injection vulnerability issues in infrastructure detail search and availability module have been fixed.
• OpManager: Previously, it was unable to access the Interface Snapshot page due to an issue in the NFA module. This has been fixed now.
• OpManager: ‘The Add Group’ button is missing int the Settings > Interfacetemplates from 125430 version. This has now been fixed.
• OpManager: The LFI Injection vulnerability issues in Schedule Discovery and Device Template module have been fixed now.
• OpManager: Previously, the device display name was not updated when the ‘CSV File Import’ option was chosen under the ‘Update Device Display Name’ option in the Quick Configuration Wizard. This issue has been fixed now.
• OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
• OpManager: The option to enable Storage Monitoring under User Management has been removed. This enables the admin to customize the scope for Business View users for accessing Storage Monitoring functions in the UI.
• OpManager: Path sanitization is now implemented for Agent based monitoring devices to prevent the possibilities of zipslip vulnerability attacks during data collection processing.
• OpManager: Previously, traps from certain devices with interface IP were not processed. This issue has been fixed now.
• OpManager: Previously, trap receiving was stopped because unwanted traps from the selected devices exhausted the maximum limit. This has been fixed now.
• OpManager: Previously, the ESX discovery was failed if the new ESX host had an identical UUID to that of an existing one. This issue has been fixed now.
• OpManager: Previously, there were issues with HyperV discovery when a HyperV host was deleted before completing inventory update and discovered again. This issue has been fixed now.
• OpManager: During Xen server connection establishment, the Xen host certificate will now be imported and proceeded for further processes.
• OpManager: Previously, the virtual VMs/Hosts having IPv6 address as primary had issues with being discovered as a virtual server during discovery, rediscovery or advanced monitoring. This has been fixed now.
• OpManager: During VM discovery, an error message (Irrelevant parameter found in the request) was thrown due to an issue with the presence of special character “/” in the vSphere client name or when there was a cluster with no host under it. This has been fixed now.
• OpManager: Issues with the search function in the Inventory Data store list page has been fixed now.
• OpManager: Previously, there were issues with switching between list and table views in the Inventory list page under Virtualization tab. This has been fixed now.
• OpManager: The virtual credentials are now hidden from the UI in OpManager’s Standard edition.
• OpManager: Previously, incorrect credential details were populated for local host when tried to change credentials from the device snapshot page. This has now been fixed.
• OpManager: The HTTP method for device availability ping and trace APIs have been changed
• OpManager: Previously, the credentials associated to the monitored printer device were written in the logs during data collection. This issue has been fixed now.
• OpManager: Issue with Xen maps that have Japanese entity names has now been fixed.
• OpManager: Japanese translation for the English phrase “Discovered Devices” in the virtualization discovery page has now been fixed.
• OpManager: Update status for URL Monitors was not working due to the restricted character length for Japanese characters. This has now been fixed since the character length restriction has been eased from 100 to 150.
• OpManager: Loading issues with the Topology map in the Cisco ACI snapshot page has now been fixed.
• OpManager: Previously, the Availability monitoring happens via native ICMP ping when the ‘localhost’ was non-pingable or blocked. This has been enhanced now by enabling native ping only when both the ‘localhost’ and the monitoring device were unreachable.
• OpManager: Previously, when the device group associated to a running Device Downtime Scheduler is updated, a few devices of the respective downtime scheduler remained in ‘Unmanaged’ status even after the schedule is completed. This issue has been fixed now.
• OpManager: On configuring uplink dependency, the status of child devices were not automatically updated from Probe to the Central server. This issue has been fixed now.
• OpManager: The scroll option in SSH terminal was not functioning in OpManager versions above 12.5.466. This has been fixed.
• OpManager: Users were unable to associate Notification Profile to devices from the Quick Configuration Wizard option when the profile had URL monitors that were added from the Add URL Monitor page. This issue has been resolved.
• OpManager: There was an issue in sending recurring Notification mails from certain Profiles configured for a device, because the alarm got cleared before delay schedule. This issue has been fixed.
• OpManager: The message variable $lastpolledvalue is not applicable for the Central server. So, the variable has been removed from the list of message variables for all types of Notification Profiles.
• OpManager: In a triggered notification profile, the category and string severity was in English instead of the installed language. This has been fixed.
• OpManager: While associating a Notification Profile for devices based on Business View (BV) or Groups, the VM datastores were also listed along with BV or Group-specific devices. This issue has been fixed now.
• OpManager MSP: There were issues in transferring the user details from the Central to a newly installed Probe and this caused problems while starting and logging into the Probe. It has been fixed now.
• OpManager MSP: NCM add on has been introduced for OpManager MSP.
• OpManager Storage Monitoring: Dell EMC Powermax can now be monitored with OpManager.
• Enterprise Edition: An existing issue which occurs while installing a new probe after upgrading OpManager from a build below 125445 has been fixed. This issue existed for all builds that were upgraded from below 125445 to any build between 125445 and 125564.
• Enterprise Edition: Previously, there was an issue while migrating OpManager Essential Edition to Enterprise Edition due an internal scheduler error. This issue has been fixed now.
• Enterprise Edition: Previously there was an issue in fetching the Probe SSL certificate in the Central server while starting up. This issue has been fixed now.
• Enterprise Edition: The Getting Started Page in the product has been updated.
• NetFlow: Consolidated report GUI has been revamped for better user experience.
• NetFlow: Support ticket 7301760 - Blurred / faded content in Inventory pages has been fixed.
• NetFlow: Support ticket 7214354 - Previous Time selection change on clicking next interface has now been fixed.
• NetFlow : Support ticket 7391017 - Selected notification template was not displayed while editing Link Down alert. This issue has been fixed.
• NetFlow: Support ticket 7310361 - The consolidated PDF report schedule failed when there was no data for the selected time period. This has been fixed.
• NetFlow: Support ticket 6972531 - In the time series graph, horizontal and vertical lines as well as a tick mark for each data labels in x-axis have been added for better data visibility.
• NetFlow: Authentication bypass vulnerability in a few file import APIs in the NetFlow EE Central Server has been fixed.
• Firewall: Support ID: 6892855 - Security audit support for Hillstone firewall.
• Firewall: Support ID: 7201671, 6280295, 6280299 - Rule administration support for Juniper SRX with CLI.
• Firewall: Support ID: 7095687 - Change Management report schedule options for everyday and current day changes (today).
• Firewall: Support ID: 6840434 - Option to configure custom service like network objects in ‘Rule Impact Analysis’ feature.
• Firewall: Support ID: 7320674 - Cisco security audit report shows rules related service value as any instead of any ICMP is fixed.
• Firewall: Support ID: 7201326 - Cisco device rule object groups and access-list configured with user object value parsing issue is fixed.
• NCM: NCM Custom Device Templates were not populating in OPMEE if Central base build was less than 125311 and Probe build is greater than 125311. The issue is now fixed.
• NCM: Unauthorized users were able to view alarms of other devices in alarm popups and dashboard widget. This issue is fixed now.
• NCM: Adding/editing a device group using criteria could not be completed successfully due to an issue. This is fixed now.
• NCM: A new REST template has been introduced for PFSense devices.
• NCM: REST credentials are now supported for PFSense devices.
• NCM: New REST Configlets have been introduced for PFSense devices.
• NCM: A detailed summary can now be accessed for REST templates.
• NCM: Users can now also check the list of CLI device templates associated with a particular REST template.
• NCM: Look and feel for confirm dialogue boxes have been upgraded throughout NCM.
• NCM: Earlier, configuration backup was failing even with correct enable credentials in few cases. This has been fixed now.
• OpUtils: Under IP Address Manager, Switch Port Mapper, and Alarms tab, you can now view Logged on User details of AD users logging in to your monitored network devices.
• OpUtils: In the Community Checker tool, write community of a given IP address is now displayed only on selecting the ‘Check the Write Community’ option.
• OpUtils: The storage location of Config File Manager’s back-up files has been changed.
• OpUtils: Previously, in the Japanese installations some text was displayed in Chinese. This issue has now been fixed.
• OpUtils: Mib Names were not in sorted order in Mib Browser. This issue has now been fixed.
• OpUtils: Previously, there was an issue with scanning DHCP scopes of Cisco routers. This issue has been fixed
• OpUtils: Previously, on importing routers from CSV files, there on was an issue with adding SNMPv3 routers. This issue has been fixed.

Build No 125490 - November 26, 2021

• OpUtils: The authentication issue in very few of OpUtils modules’ audit directories has been fixed. (Refer CVE-2021-44514)

Build No 125489 - November 3, 2021

• General: Previously, Password reset logic was predictable as reported by HaYiCle. This has now been updated to enhance security.
• General: Previously, there was an issue in creating and updating ‘Roles’ in user management when the webclient language was Japanese. This has been fixed now.
• OpManager: Previously, the device display name was not updated when the ‘CSV File Import’ option was chosen under the ‘Update Device Display Name’ option in the Quick Configuration Wizard. This issue has been fixed now.
• OpManager: ‘The Add Group’ button was missing in the Settings >Configurations> Interface Templates from version 12.5.430 onwards. This has now been fixed.
• OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
• OpManager MSP: When ‘All Customers’ option was chosen, the option to edit server certificate under Security Settings was not shown in MSP Central. This issue was noticed in versions 12.5.450 and above, it has been fixed now.

Build No 125487 - October 27, 2021

• OpManager: Previously, users were unable to access the Interface Snapshot page due to an internal error. This issue has been fixed now.

Build No 125486 - October 21, 2021

• OpManager: The XSS vulnerability issues in DCM’s category filter have been fixed now.
• OpManager: The Hacksaw classified SQLi vulnerability issues in Windows Service Workflow task have been fixed now.
• OpManager: The APM plugin promotion pages (under the Application dashboard and Third Party integrations) is now revamped for better user experience.
• OpManager: Due to a device down cache issue, the Data Collection Manager credential results showed a few devices to be down even when the actual device was up and running. This issue has been fixed now.
• OpManager: Previously, there were issues with the ‘Poll using IP address’ option a few modules such as data collection, performance monitor addition, Windows service monitoring, hardware monitoring, etc. This issue has been fixed now.
• OpManager: Previously, during Service startup, duplicate schedules were created for Forecasting Adaptive Threshold specific task which lead to increase in resource consumption. This issue has been fixed now.
• OpManager: The vHostID and status parameters are now removed from mapEntity and getServiceResponseGraph APIs respectively.

Build No 125485 - October 21, 2021

• General: Two-Factor Authentication, when enabled, will be applicable for Mobile App login also.

Build No 125483 - October 12, 2021

• Enterprise Edition : All data sent from the Probes to the Central will be audited and can be seen on the Modules Loaded widget of the System Performance Dashboard.
• General : Low privileged users were able to access Audit reports and mail server details(Reported by Ranjit Pahan). This issue has been fixed.
• General : Previously, certain issues were noticed in the product when a user entered the user name credentials during log in with different casing. This issue has now been fixed.
• General: API key authentication will now be used as the login method instead of username/password, when OpManager is added as an add-on in Application Manager.
• OpManager: The XSS vulnerability issues in the IPMI’s’Edit Threshold’ page and some monitors (hardware, virtualization, windows service, service, process, file, folder and URL monitors) have been fixed now.
• OpManager: A new header field - ‘User Agent’ is now added for URL monitors. Specifying browser details here will enable OpManager to monitor restricted URLs.
• OpManager: The ‘Apps’ tab is now renamed as 'Applications’. In addition, the APM plugin promotion page (under the Applications tab) is now revamped for better user experience.
• OpManager Storage Monitoring : OpManager now supports EMC Data Domain device models.

Build No 125482 - October 08, 2021

• General: The low privileged user access issue noticed in the APIs for third party integration has been fixed.

Build No 125476 - January 21, 2022

• OpManager: While creating discovery schedule, users were unable to add more than one email address in the ‘Email Notification’ section. This issue has been fixed now.
• OpManager: Loading issues with the Meraki snapshot widgets have been fixed now.
• OpManager: If a Device downtime scheduler is started when another scheduler is in-progress of either starting or ending its task, the devices under former downtime scheduler will not be moved to maintenance (Unmanaged) state. This issue has now been fixed.
• OpManager: From OpManager build version 125415, traps without the agent address were received from devices that were not configured in the Trap Settings. This issue has been fixed now.
• OpManager: The page loading/freezing issue while refreshing the Monitors Tab from Device Snapshot Page has now been fixed.
• OpManager: From OpManager builds 125399, the option to export the Integrated Reports (tabular report) in XLS format was not shown in UI due to an issue. The issue is fixed now and users can now export reports in XLS format.
• OpManager: When a tabular report for devices was created based on monitors or instance using the Report Builder option, the exported XLS file did not have the data. This issue has been fixed now.
• OpManager: The monitoring data for the interface Total Utilization Percentage was not shown, when a report was created using the Advanced Reports feature. This issue was noticed from OpManager build versions from 125416, it has been fixed now.
• OpManager: Report Builder does not show data when the time period selected is large. This issue was noticed in OpManager builds after 125437, it has been fixed now.
• Enterprise Edition : There was an issue in updating the status of the standby probe in the Central. This issue was noticed in OpManager build versions from 125448, it has been fixed now.
• OpUtils: There was an XSS vulnerability issue in the subnet details of subnets monitored using IP Address Manager, as reported by Hazem. This issue has been fixed.
• NetFlow: Authentication bypass vulnerability in a few file import APIs in the NetFlow EE Central Server has been fixed.

Build No 125475 - January 11, 2022

• General: While submitting a username using the ‘Enter’ key in the Forgot Password option, an error occurred. This has been fixed now.
• General: Previously, there was an issue in creating and updating ‘Roles’ in user management when the webclient language was Japanese. This has been fixed now.
• General: Low privileged users were able to access Support Module (Reported by Ranjit Pahan). This issue has been fixed.
• General: Previously there was an issue in displaying the product name in message field for the configured mail notification. This has been fixed now.
• OpManager: Previously, an error message (Rack Name already exists) was thrown when the users tried to edit the background color or tile color in the 3D Floor View. This issue has been fixed now.
• OpManager: Some Japanese and Chinese language characters were restricted in the Message and Subject fields while scheduling a report. This has been fixed now.
• OpManager: Previously, a few devices remained in the ‘Unmanaged’ state even after the expiry of a downtime scheduler (run with the group filter). This occurred when the group was updated while the scheduler was still running. This issue has been fixed now.
• OpManager: On configuring uplink dependency, the device status for child devices were not automatically pushed (updated) to the Central server even when updated in the Probe. This issue has been fixed now.
• OpManager: The ‘Add Group’ button is missing in the Settings >Configurations> Interface Templates from 125430 version. This has now been fixed.
• OpManager: Previously, the device display name was not updated when the ‘CSV File Import’ option was chosen under the ‘Update Device Display Name’ option in the Quick Configuration Wizard. This issue has been fixed now.
• OpManager: Previously, garbled characters appeared when importing CSV file (with Shift-JIS encoding) from the Custom Fields or Update Device displayname page. This issue has now been fixed.
• OpManager: Previously, UPS devices were not listed in the Devices report generated from the Advanced Reports page. This issue has now been fixed.
• OpManager: Previously, during Service startup, duplicate schedules were created for Forecasting Adaptive Threshold specific task which lead to increase in resource consumption. This issue has been fixed now.
• OpManager: Issue with Xen maps that have Japanese entity names has now been fixed.
• OpManager: Japanese translation for the English phrase “Discovered Devices” in the virtualization discovery page has now been fixed.
• OpManager: Update status for URL Monitors was not working due to the restricted character length for Japanese characters. This has now been fixed since the character length restriction has been eased from 100 to 150.
• OpManager: Previously, there was an issue while migrating OpManager Essential Edition to Enterprise Edition due an internal scheduler error. This issue has been fixed now.
• OpManager: The SQL injection and path traversal vulnerability issue in the Credentials module has now been fixed.
• Firewall : Support ID: 6989267 - Exporting Standand Compliance report in Japanese language was not working and couldn’t send mail also. This issue is fixed.
• Firewall : Support ID: 7275763 - Under Schedule List, status of a schedule couldn’t be updated. When tried to disable it, wrong message was thrown. This issue is fixed.
• Firewall : Support ID: 7290303 - Alert ProfileName was not shown properly if the profile name was in Japanese. This has been fixed.
• Firewall : Support ID: 7275254 - Report Profile Name with Japanese character was not shown properly under ScheduleList page. Also ‘Add Report Profile’ was not translated appropriately. Both are fixed.
• Firewall : Support ID: 7289486 - While exporting Rule Comparison to XLS, few keys were not translated to Japanese.This has been fixed. XLS export is not supported for Config Comparison. So removed the icon.
• Firewall : Support ID: 7275993 - adv_log_srch shown in PDF export of Raw Search Report is changed to meaningful content. And Aggregated Search Report is modified to show proper Device List.
• Firewall : Support ID: 7289487 - When creating Administrator user, option "Allow Firewall Rule Administrator for this user’ was not shown. And Operator was having EditDevice option under Inventory which should be restricted. Both the issues are fixed.
• Firewall : Support ID: 7285818 - When exporting Policy Optimization to CSV or XLS, Information about Rule used for comparision was not shown. This is fixed.
• Firewall : Support ID: 7285910 - When Rule Reorder was exported to XLS, Device Info was duplicated to multiple cell. And few i18n keys were missing. Both the issues are fixed.
• Firewall : Support ID: 7275227 - Previously, Others and Total values were not there in CSV and XLS export of Firewall Reports. These have been included now.
• Firewall : Support ID: 7289484 - Previously, Ondemand mail option was not working in Security Audit page. This has been fixed along with few i18n and garbled character issues.
• Firewall : Support ID: 7289515 - Blank page was shown when logged-in as Read Only Custom User. This has been fixed.
• Firewall : Support ID: 7457280 - Garbled characters found in Policy Optimization, Alarm Profile and Custom Report Profile pages are fixed
• Firewall : Support ID: 7285958 - Under Rule Comparison, Device Name was displayed in chainese language instead of Japanese language. Also when report was exported as pdf or xls, INVALID_CSRF_TOKEN error was thrown. These issues have been fixed along with few i18n issues.
• NCM : Earlier, there was an issue during the redirection of discovery reports from schedule audit. This has been fixed now.
• NCM : Earlier, Configuration Upload Request report showed invalid data for approved requests and rejected requests. This has been fixed now.
• NCM : Earlier, there was an issue in device filtration in User Access report. It has been fixed now.
• NCM : Earlier, there was an issue in CSV file of Startup Running conflict Report. It has been fixed now.
• NCM : Earlier, there was an issue in filtering firmware vulnerability mail report based on the device group. It has been fixed now.
• NCM : Earlier, there was an issue in color code used in firmware vulnerability report. It has been fixed now.
• NCM : Earlier, there was an issue while updating Startup-Running Configuration Conflict status. It has been fixed now.
• NCM : Earlier, there was an issue while adding device groups in the ‘Device Group Name’ field with Japanese characters. It has been fixed now.
• NCM : Earlier Japanese translation was missing for some fields in the firmware exposed devices reports, approval requests, export configurations and change notification pages. This issue has been fixed now.
• NCM : Earlier, there was an issue while creating PCI Schedule from the PCI Page. It has been fixed now.
• NCM : Earlier the PCI Reports Page and the exported PCI Reports did not match the terms used to indicate the PCI review status. It has been fixed now.
• NCM : Earlier, whenever a Configlet Schedule was requested by an Operator role user, the Configlet content was not show in the request. The content will be displayed henceforth.
• NCM : Earlier, while creating Sync Configuration Schedule, whenever foreign characters were used in the Schedule Name, Garbled characters were displayed in the Schedule Audit Result. This has been fixed now.
• NCM : Earlier in the Hardware Inventory report, Cisco Inventory details were displayed for all vendors in XLSX format. This has been fixed now.
• NCM : Japanese translation was missing for few fields in Credential Rules page, they have been added now.
• NCM : New OPMEE probe was not starting after applying any PPM post 125445 (including), due to a bug in NCM addon’s code. It has been fixed now.
• OpUtils : Previously, in the Japanese installations some text was displayed in Chinese. This issue has now been fixed.
• OpUtils : Mib Names were not in sorted order in Mib Browser. This issue has now been fixed.

Build No 125473 - November 11, 2021

• NCM: Earlier, there was a Remote Code Execution (RCE) vulnerability in the Ping functionality (Reported by Nam (aka m3) from ECQ). This issue has been fixed now.
• OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.

Build No 125472 - October 19, 2021

• OpManager: The ‘Add Category’ option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.

Build No 125471 - October 01, 2021

• OpUtils : You can now add and manage overlapping IP subnets with OpUtils
• OpUtils : There was an XSS vulnerability issue in the Task Name of Scheduler in Switch port Mapper, as reported by Ranjit Pahan. This issue has been fixed.
• OpUtils : There was an XSS vulnerability issue in the Task Name of Scheduler in IP Address Manager, as reported by Ranjit Pahan. This issue has been fixed.
• NetFlow: Low privileged users had access to multiple modules when it was disabled has now been fixed. (Reported by Ranjit Pahan)
• NetFlow: CSRF vulnerability in multiple pages has been fixed. (Reported by Ranjit Pahan)
• NetFlow: Stored XSS vulnerability while adding SNMP credential has been fixed.(Reported by Ranjit Pahan)
• NCM: Multiple stored XSS and low privilege escalation vulnerabilities reported by Ranjit Pahan have been fixed.

Build No 125470 - September 29, 2021

• OpManager: You can now generate health and inventory reports for Meraki and Cisco ACI devices through advanced reports.
• OpManager: Previously, the custom interface widgets added from the report builder had loading issues if there was no data collected for the selected time period. This has been fixed now.
• OpManager: Issues with background image selection in the business view feature has been fixed now.
• OpManager: The ‘Add Business view’ option was displayed twice under the Maps tab. This issue has been fixed now.
• OpManager: The map icon in the device snapshot page was navigating to an incorrect device plotted on the Google Map. This issue has been fixed now.
• OpManager: Operator users will now have access to business view related widgets which was previously restricted.
• OpManager: Under IPSLA settings, an option to update the threshold settings for existing VoIP, WAN RTT and Video monitors is now provided in their respective threshold template sections.
• OpManager: The ‘Group by Groups’ filter will now list all members of the group in the Tree View widget and Tree View filter of the Inventory page. In addition, you can now navigate to the group snapshot page by right-clicking on the respective group name.
• OpManager: A new feature, 'Network Path Analysis (beta version)' has been introduced in OpManager Professional edition for Windows OS. You can now visualize the traffic patterns and continuously monitor the performance of network paths between the source and destination.
• OpManager: IPMI-based hardware monitoring is now supported for Supermicro vendors allowing users to intensively monitor its hardware metrics.
• OpManager: Previously, IPMI alerts were only raised for sensors that were in the clear state during the time of device discovery. This issue has been fixed now.

Build No 125469 - September 24, 2021

• General: The XSS vulnerability issue in Task Name of Workflow has now been fixed. (Reported by Ranjit Pahan.)

Build No 125468 - September 23, 2021

• General: Low privileged users were able to access Device Filters, Support Module and SDP On-Premise Integration feature (Reported by Ranjit Pahan). This issue has been fixed.
• General: API key’s security has been enhanced with a stronger encryption algorithm.
• OpManager : In versions above 12.5.399 , few widgets were not displayed when NOC view in the Dashboard, was accessed with Embed link. This issue has now been fixed.
• OpManager Plus: An alert was mistakenly raised, when users tried to configure the Domain Details without enabling the auto-login option. This issue has been fixed now.

Build No 125467 - September 17, 2021

• Enterprise Edition : Smart Upgrade was not triggered in Probes that communicated with the Central through a Proxy. This issue was noticed in OpManager build versions higher than 125203, but it has been fixed now.
• OpManager: The SQL injection vulnerability issue in Report module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-41288)
• OpManager: The Device Availability widget created using Report builder failed to display data. This has been fixed now.
• OpManager: The header key for viewing records displayed a different name instead of 'View Records’. This has been fixed now.
• OpManager: Data collection reports and workflow logs have been removed from the list of scheduled reports, as users cannot schedule that report.
• OpManager: When users tried to add Integrated Reports as a widget in the Dashboard, irrelevant parameter errors were noticed. The errors have been fixed.
• OpManager: The widget for integrated reports displayed data in Area Graph view by default, even when the report was built with a bar or line graph view. This issue has been fixed.
• OpManager: When an Alarm Message contained more than 4000 characters, the alarm was not generated. This issue has been fixed.

Build No 125466 - September 14, 2021

• General: The SparkGateway package has been updated to its latest version 6.0.0.
• OpManager: Previously, some of the Windows10 and Windows 2019 devices discovered using SNMP credentials were incorrectly categorised. This issue has been fixed now.
• OpManager: In some cases, the WMI data collection was not occurring for multiple node monitors due to a cache mismatch issue. This has been fixed now.
• OpManager: In the Device Credentials page, the CLI credentials were automatically associated with devices during other credential association. This issue has now been fixed.
• OpManager: Issues with the download option in the ‘Deploy Agent’ page has been fixed.
• OpManager: Issues with the OpManager Agent Upgrade has been resolved.
• OpManager: Issues with the stored XSS vulnerability in Process Monitoring module (as reported by Ranjit Pahan) have been fixed.
• OpManager: Issues with the stored XSS vulnerability in Windows Service Monitors module have now been fixed.
• OpManager: Previously, there was a partial data collection issue in the HP iLO4 version due to a parameter mismatch. This has now been fixed.
• OpManager MSP : Authorization issues that were noticed in multiple modules of MSP Edition as reported by Ranjit Pahan has been fixed.

Build No 125459 - December 24, 2021

• General: Low privileged users were able to access Support Module (Reported by Ranjit Pahan). This issue has been fixed.
• OpManager: Previously, there was an issue while migrating OpManager Essential Edition to Enterprise Edition due an internal scheduler error. This issue has been fixed now.
• OpManager: The SQL injection and path traversal vulnerability issue in the Credentials module has now been fixed.
• OpManager: While upgrading OpManager Enterprise Edition to version 125445 or above, the newly added probes were not starting even after uploading the PPM files, due to a bug in the NCM addon code. This issue has been fixed now.

Build No 125457 - November 11, 2021

• OpManager: The asset sync functionality issues in ServiceDesk Plus OnPremise and MSP have been fixed now.
• NCM: Earlier, there was a Remote Code Execution (RCE) vulnerability in the Ping functionality (Reported by Nam (aka m3) from ECQ). This issue has been fixed now.

Build No 125456 - October 20, 2021

• OpManager: The ‘Add Category’ option in the Donut view of Inventory page was missing from builds 125228 version. This has now been fixed.

Build No 125455 - September 21, 2021

• NetFlow: SQL Injection in Attacks Module API has now been fixed. (Reported by Hồng Dương Trần. Refer: CVE-2021-41075)
• NCM: Earlier, there was an issue with detecting devices running on vulnerable firmware due to an “out of memory” exception. This has been fixed now.
• NCM: The SQL injection vulnerability issue in configuration search has now been fixed.(Reported by Hồng Dương Trần)
• NCM: The SQL injection vulnerability issue in hardware details search has now been fixed.(Reported by Hồng Dương Trần)
• OpManager: The SQL injection vulnerability issue in Report module has now been fixed.(Reported by Hồng Dương Trần)
• OpManager: Issues with background image selection in the Business View feature has been fixed now.
• OpManager: Issues with the stored XSS vulnerability in Process Monitoring module as reported by Ranjit Pahan has been fixed
• OpManager: Issues with the download option in the Deploy Agent page has been fixed.
• OpManager: Issues with the stored XSS vulnerability in Windows Service Monitors module have now been fixed.

Build No 125453 - September 03, 2021

• OpManager: The SQL injection vulnerability issue in support diagnostics module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-40493)

Build No 125452 - September 02, 2021

• OpManager: A new feature - ‘Adaptive Thresholds’ has now been introduced. This will help users optimize efficiency of the incoming alerts by setting dynamic threshold values for critical monitors such as CPU performance, memory utilization and response time.
• OpManager: URL monitoring is now supported as an add-on in OpManager Standard Edition. Based on their requirement, users can enable the add-on.
• OpManager: ServiceDesk Plus On-Premise Integration - Users can only install ServiceDesk Plus (SDP) versions that are higher than version 11200 due to SDP V1 Request API deprecation. Customers using older versions, will have to upgrade to the higher versions to experience services continuously.
• OpManager: ServiceDesk Plus Cloud Integration - Previously, users were allowed to view a maximum of 10 records, while configuring the Notification Profile to log a ticket in ServiceDesk Plus Cloud. This limit has been increased and users can view a maximum of 100 records.
• OpManager: Migration issue from versions 125192 when Webhook is configured has been fixed.
• OpManager: ServiceDesk Plus On-Premise Integration - Configuration issues were noticed in ServiceDesk Plus On-Premise Integration. Those issues have been fixed now.

Build No 125451 - August 31, 2021

• OpManager: The interface bandwidth report has been enhanced to display the minimum, maximum and average values of In/Out traffic in the table view and when the mouse pointer is hovered through the graph.
• OpManager: Previously, the availability monitoring (using ICMP) failed in Chinese (traditional and simplified) and Japanese language Windows installations due to a corrupted ping pattern file. This issue has now been fixed.
• OpManager: In Japanese installations, the predefined text ‘New BusinessView’ in the Business view name field (in the Create Business View page) was displayed in English. This issue has now been fixed.
• OpManager: Previously, it was unable to associate interfaces to an existing group from the Server tab. This issue has now been fixed.
• OpManager: Previously, incorrect alerts were raised for ‘VPN tunnel status’ monitor in Cisco and Fortinet firewall devices. This issue has now been fixed.
• OpManager: In Cisco firewall devices, the VPN discovery failed due to the tunnel index mismatch in the OID response. This issue has now been fixed.
• OpManager: During Layer 2 discovery via LLDP, the IP address was not properly mapped to a few devices. This issue has now been fixed.
• OpManager: You can now monitor the Cisco ACI environment using Out-of-Band management IP of APICs and Fabrics.
• OpManager: Due to security concerns, the support for flash Business View has been stopped in OpManager. You can migrate your existing business views into HTML and continue using them.
• OpManager: Previously, there were issues with device template sync operation when proxy configuration was enabled in OpManager. This issue has been fixed.
• General: The Trace Route tool under Toolset is now displayed as TraceRoute.
• OpUtils: Previously, under IP Address Manager and Switch Port Mapper, there was an issue with the devices accessed by users with insufficient scopes. This issue has been fixed.
• OpUtils: Previously, in the published Switch Port Mapper reports, there was an issue with displaying last scan time. This issue has been fixed.
• OpUtils: Previously, special characters were not accepted as Custom Column names. This issue has been fixed.
• OpUtils: Previously, under Switch Port Mapper, the trunk port snapshot page went blank on handling large number of associated MACs or IPs. This issue has been fixed.
• OpUtils: Previously, there was an issue with the Switch Port Mapper’s tree group, on accessing a port from the Port View of OpManager’s switch snapshot page. This issue has been fixed.
• OpUtils: Previously, under Switch Port Mapper Tree View, there was an issue in creating tree groups on importing switches through CSV files. This issue has been fixed.
• OpUtils: Previously, in OpManager, there was an issue with loading switch port details when switches were added using different DNS servers. This issue has been fixed.
• OpUtils: Previously, in the IP Address Manager and Switch Port Mapper Tree View, there was an issue in expanding and collapsing tree nodes. This issue has been fixed.
• OpUtils: Previously, Switch Port Mapper’s Switch page flickered when a scan was triggered and completed. This issue has been fixed.

Build No 125450 - August 27, 2021

• General: The ‘License Activation’ page and the ‘License Management’ page will only be visible for users with administrator access to all modules.
• General: There was an issue when upgrading Japanese installation to version 12.5.399 or above. This issue has now been fixed.
• General: There was a CSRF vulnerability during the regeneration of API Key, as reported by Ranjit Pahan. This issue has now been fixed.
• General: There was a problem in displaying the server time accurately. This issue has now been fixed.
• General: There was a mismatch related to Product specific details in the license information pop-up. This issue has now been fixed.
• OpManager: Under ‘LogATicket’ notification profile, the description field’s character length has now been increased to 500 characters.
• OpManager: There was a scroll issue for some devices in the SSH terminal page. This issue has now been fixed.
• Enterprise Edition: The alarms related to network connectivity of the Probe Server will no more be pushed to the Central Server.
• Enterprise Edition: Previously, there was a display issue involving probes in the “License Details” screen when the license limit was exceeded. This issue has now been fixed.

Build No 125448 - August 20, 2021

• OpManager: Users were unable to locate an alarm available in the All Alarms page of the Central server using its alarm id. This issue has been fixed.
• OpManager: Users were unable to save an Alarm Escalation Rule when an alarm variable was introduced in the message field. This issue has been fixed now.
• OpManager: Users were unable to save an Alarm Escalation Rule if the configured email address included ‘+’ character. This issue has been fixed.
• OpManager: Two byte characters are supported in the Message field of Generate Alarm action, and Subject and Message fields of the Send Email action.
• OpManager: Previously, there was an issue with associating performance monitors that didn’t have proper vendor names mapped to them. This has now been fixed.
• OpManager: To ensure security, the script execution is interrupted when the complete path of the execution directory is not specified.
• Enterprise Edition: The Central was unable to process the archived data sent from Probes because of the previous data size restriction of 5 MB. But to facilitate data processing in the Central, the data size limit has been increased to 100 MB.
• Enterprise Edition: The upgrade process failed when the OpManager tray icon was found missing while updating the Probe name to it. However, the issue has been resolved to avoid upgrade failure.
• Enterprise Edition: Previously, the Logical Group alarms count was updated, but the details of the alarms were not shown in the Central’s UI. This caused disparity between the actual count and the count of the alarms in the list. To avoid this mismatch, the Logical Group alarm details are also updated in the Central.
• Enterprise Edition: The Alarm notes in the All Alarms page were not shown in the Central UI. This issue has been fixed.

Build No 125446 - August 12, 2021

• General: ISO 8601 time format (yyyy-MM-ddThh:mm:ss) is now supported.
• General: Rebranding the product will now reflect in the page footer of exported reports.
• General: There was an issue highlighting the ‘Set as default’ icon in the dashboard page when a dashboard was set as default. This issue has now been fixed.
• General: Due to security reasons, the option to ‘skip’ login will no longer be available during product evaluation.
• General: Previously, there were a few issues while performing operations on a dashboard, after renaming it. This issue has now been fixed.
• OpManager: The ‘View Criteria’ button under ‘Actions’ in the Notification Profiles index page will display the poll count (as configured under Settings-> Configurations-> Device Down Settings) if ‘Device down for’ is selected as a Criteria.
• OpManager: Custom field or device field variables, when added at the start of the ‘Message’ field of Email Notification Profiles, were not reflected in notification emails. This issue has now been fixed.
• OpManager: There was an issue displaying search results when a BV user searched for devices. This issue has now been fixed.
• OpManager: Previously, Business Views were not listed in the Scope tab if Auto-Login was not enabled. This occurred when editing Domain Details. The issue has now been fixed.
• OpManager: Sometimes, the correct monitors under Notification Profile criteria were not selected while configuring Notification Profiles. This issue has now been fixed.
• OpManager: Issues with loading the ‘Custom HTML or Text’ widget in NOC Views have now been fixed.
• OpManager Plus: Previously, Applications Manager component was not included in the default OpManager Plus license. This issue has been fixed.

Build No 125437 - September 21, 2021

• OpManager: The SQL injection vulnerability issue in Report module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-41288)
• OpManager: The SQL injection vulnerability issue in support diagnostics module has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-40493)
• OpManager: Issues with the stored XSS vulnerability in Process Monitoring module as reported by Ranjit Pahan has been fixed.
• OpManager: Previously, the Windows ping pattern was garbled with Chinese (Simplified), Chinese (Traditional), and Japanese installations, resulting in polling failure. This issue has now been fixed.
• OpManager: Issues with loading the ‘Custom HTML or Text’ widget in NOC Views have now been fixed.
  General: In some cases StandBy server upgrade was failed in MSSQL failover setup. This has been fixed.
• NCM: Earlier, there was an issue with detecting devices running on vulnerable firmware due to an “out of memory” exception. This has been fixed now.
• NCM: The SQL injection vulnerability issue in configuration search has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-41081)
• NCM: The SQL injection vulnerability issue in hardware details search has now been fixed.(Reported by Hồng Dương Trần. Refer: CVE-2021-41080)

Build No 125434 - August 03, 2021

• OpManager: During server discovery, a set of basic SNMP performance monitors will now be assigned to devices that are discovered with no default monitors but a valid SNMP credential.
• OpManager: When added as an add-on in APM, the syncing of devices, interfaces and alerts has now been fine tuned for better efficiency.

Build No 125433 - August 02, 2021

• OpManager: A new field ‘IfAlias’ is now included under the Interface Criteria option in the Interface Discovery page. You can now discover interfaces with its ‘ifAlias’ value.
• OpManager: Previously, the interface discovery failed to fetch matching interfaces if the ‘Device category’ field value (under Device Criteria) had non-english characters in it. This issue has now been fixed.
• OpManager: Pagination has been done to the ‘Edit Rule’ page of Discovery Rule Engine to list all the configured criteria and actions.
• OpManager: Previously, the devices that were manually classified as ‘Wireless Access Point’ were not listed under the ‘Access Point’ section in the license activation page (even when included in the license exceed count). This issue has now been fixed.
• OpManager: The ‘Ping Device’ action under Workflow had issues with the configured count of ICMP ping packets that were sent to devices which were down. This has now been fixed.
• OpManager: There were loading issues with the ‘Availability History’ graph in the Alarm Snapshot page. It has now been fixed.
• OpManager: Previously, data collection was not happening for SNMPv3 devices if its IP address was updated. This issue has now been fixed.
• OpManager: Previously, the Layer2 discovery failed either due to garbled values in the LLDP OID response or if SNMPv1 credential was associated to any device in that topology. This issue has now been fixed.
• OpManager: During Layer2 discovery, there was an OOM (Out of memory) error while storing bulk SNMP response from the MIBs. This issue has now been fixed.
• OpManager: Previously, the display name of the discovered Meraki device was incorrectly updated with its serial number. This issue has now been fixed.
• OpManager: The process of updating SNMP v1/v2 credentials (under Settings -> Credentials) has now been optimized for better usability.
• OpManager: During rediscovery, the DNS name of the device was not updated when the ‘Poll Using - IP Address’ option was enabled under Monitor Settings. This issue has now been fixed.
• OpManager: In the availability timeline chart, there was a time zone mismatch between the Central and Probe servers. This issue has now been fixed.
• OpManager: Previously, the interfaces that did not match the configured interface criteria were also discovered when the criteria was added with ‘OR’ condition in the Interface Discovery page. This issue has now been fixed.
• OpManager: During network discovery, some devices were not listed in ‘Discovered Devices’ page if the particular vendor had numerous devices. This issue has now been fixed.
• OpManager: Dashboard widgets (such as Last N hours Traffic, Last N hours Errors and Discards, Last N hours Total Bytes Transferred and Last N hours Values) of performance monitors had issues with plotting the graph due to an incorrect Y-axis value. This issue has now been fixed.
• OpManager: During bulk deletion of devices, when a device existed in the Add-on module (such as NCM, NFA, etc.) and the ‘Discover Add-on Devices’ option is enabled (under Discovery Settings), all the add-on devices including the unselected ones were incorrectly deleted from the OpManager Inventory. This issue has now been fixed.

Build No 125432 - July 28, 2021

• OpManager : Translation errors in OpManager UI has been fixed for other languages.
• OpManager : The Report Settings option on the UI is available only for users with Write access.
• OpManager : The reload option under Storage Dependency View inside the device snapshot page will not be available for users with Read or Write access rights.
• OpManager : When the storage monitoring option is not enabled while adding a user, the access to storage devices and all storage device related configurations will be restricted to that user.
• OpManager : The Trap settings and Trap Viewer options in MSP Central has been removed.
• OpManager : User management related issues has been fixed.
• OpManager : The logs of workflows will be accessed only in OpManager.
• OpManager : An option to schedule Alarm Suppression has been introduced in Workflow.

Build No 125431 - July 22, 2021

• OpManager: The Webhook integration page has been revamped, and contextual failure messages have been added for improved user experience.
• OpManager: The Body Content length for Webhooks has been increased to enable collection of more details.
• OpManager: Previously, users had to manually import SSL certificates for some Webhook-related use cases. This behaviour has been modified, and manual SSL certificate import is not required from now on.
• OpManager: There was a path traversal vulnerability discovered with a method in Apache’s common-io.jar file used in OpManager. This vulnerability has been mitigated now by removing the concerned method’s dependency.

Build No 125430 - July 16, 2021

• General: Previously, database connections got exhausted in PostgreSQL setups if Applications Manager was integrated as a plugin. This issue has now been fixed by increasing the maximum connections to 150 by default.
• General: There was an issue with loading the ‘Custom HTML or Text’ widget in NOC Views in versions 125379 and above. This issue has now been fixed.
• OpManager: The HTML template for Email Notification Profiles can now be customized.
• OpManager Plus: There was a thread lock issue during startup for versions 125399 and above. This issue has now been fixed.
• Enterprise Edition: Previously, Probe server’s cold startup would fail if QPPM was applied in the Central server. This has now been fixed.
• OpManager MSP: Support for multiple probes is now available for individual customers.
• OpManager MSP: Previously, there was an issue with AD domain deletion. This issue has now been fixed.

Build No 125428 - July 09, 2021

• OpManager: A navigation tree has been introduced in the left pane of the Virtualization page to enable easier access to virtual devices.
• OpManager: During manual installation of OpManager agent, the publisher name was not displayed in the installation popup. This has been fixed.
• OpManager: 34 new Performance Monitors have been introduced for Server and Desktop categories, and 54 new Application Monitors have been introduced to monitor more metrics.
• OpManager: With the 12.5.229 version upgrade, users noticed slow load speed while accessing the All Alarms/Active Alarms page on the UI. The load speed has been optimized now.
• OpManager: A new report “All Virtual Machines” has been introduced under “Virtual Server Reports” section to view the VMs available in OpManager across multiple vendors along with their power state.
• OpManager: There was a minor issue with displaying multiple interfaces in the Rediscover Interfaces page when rediscovery was performed. This has been fixed now.
• OpManager: Previously, there was an issue loading menu tabs after migrating from Essential edition to Enterprise edition if the Essential edition was upgraded to version 12.5.399 or above. This issue has now been fixed.

Build No 125420 - July 20, 2021

• General: There was an issue with loading the ‘Custom HTML or Text’ widget in NOC Views in versions 125379 and above. This issue has now been fixed.
• OpManager: There were loading issues with the ‘Availability History’ graph in the Alarm Snapshot page. It has now been fixed.
• OpManager MSP: There was an issue when editing Customer Administrator and Customer Operator user configurations in versions 125399 and above. This issue has now been fixed.

Build No 125417 - July 02, 2021

• OpManager: You can now enable advanced monitoring for devices associated with the Meraki controller even if it already exists in OpManager Inventory. Now, these devices will also be classified as a Meraki device.
• OpManager: Around 81 new device templates and additional performance monitors have now been added for the proper classification of devices during Network Discovery.
• OpManager: Previously, the ‘Devices by Memory Utilization’ widget displayed incorrect data due to improper graph name in the ‘Total Used Memory’ performance monitor (OID .1.3.6.1.4.1.9.9.109.1.1.1.1.12). This issue has now been fixed.
• OpManager: A separate column for uptime statistics is now provided in the device and interface snapshot page, when drilled down from the Availability dial.
• OpManager: Previously, interfaces were not discovered for SNMPv3 devices from the Interface discovery page. This issue has now been fixed.
• OpManager: Previously, the group status was not updated properly when the same device was present in multiple groups. This issue has now been fixed.
• OpManager: Previously, the Interfaces tab in the Device Snapshot page failed to display any data if there were interfaces with large ‘ifindex’ values. This issue has now been fixed.
• OpManager: Previously, there were data collection issues in Cisco OSPF Neighbor state and OSPF IF State monitors due to incorrect graph type. This issue has now been fixed.
• OpManager: Previously, the Active Directory (AD) dashboard in the device snapshot of the Domain controller doesn’t show up properly. This has been fixed.
• OpManager: A warning message on the usage restriction of special characters in the ‘Network Discovery Profile Name’ will now be displayed before initiating the discovery process.
• OpManager: Previously, there were issues in displaying the live admin and operational status of interfaces in the Business View map page. This has now been fixed.
• OpManager: When trying to delete MSSQL/Exchange monitors from the Device Snapshot page (Action > Delete Monitor), the action was not performed due to an internal communication issue. This has been fixed.
• OpManager: During the first startup, there was an issue with applying license in OpManager in some cases, when the license file contained URL components. This has been fixed.
• NCM: Minor UI issues are resolved and few enhancements are made in UI.
• NCM: Credential Profile page is moved to Config Automation tab.
• NCM: Device group name has been made editable.
• NCM: Credential Rules feature is introduced.
• NCM: Earlier, Administrators were unable to execute Configlets created by other users. This issue has been fixed now.

Build No 125416 - July 01, 2021

• OpManager : Users can now add 2-byte characters inside the alarm notes.
• OpManager : Previously, users were allowed to view & download advanced reports with a maximum of 1000 rows. This limitation is removed now.
• OpManager : Traps received from IPMI IP address of a device was not processed earlier. This issue has been fixed now.
• OpManager : The traps received for an OpManager server is limited to 50000. Previously this count was applicable to traps received from all the devices. Now, this count is applicable only to traps from devices selected via Trap Settings.
• OpManager : Previously, when SNMP Trap collection was enabled and the Trap port was changed, OpManager failed to collect SNMP Traps. This issue has been fixed now.
• Enterprise Edition : Smart upgrade was not triggered when a Probe was down during the Central upgrade process. This issue has been fixed and a Probe gets upgraded automatically when it is started.
• Enterprise Edition : The imported SSL certifications of old customers were automatically self signed after migration. This issue has been fixed now.
• Enterprise Edition: The scalability option introduced in OpManager Enterprise Edition limits the access of archived data in the Central. This enables to connect more number of Probes to the Central.
• OpManager Storage Monitoring : Device discovery issues were noticed when Dell EMC Isilon/ HPE Primera were added to the network. The issue has been resolved now.
• OpManager Storage Monitoring : The snapshot data of certain versions of Huawei storage devices were represented with wrong values. This has been fixed now.
• OpManager Storage Monitoring : The disk count data of Synology device model was represented with a wrong value. This has been fixed now.
• OpManager Storage Monitoring : Status polling failed to work for Hitachi storage device models when the display name was changed from the snapshot page of the device. This issue has been fixed now.
• OpManager Storage Monitoring : Users were unable to delete or unmanage certain storage devices as their details were found missing in the list. This caused problems during log in, but the issue has been fixed now.
• OpManager Storage Monitoring : The rearm alarm was not raised when the tapelibrary IBM 3584 was available again after the device was down. This issue has been fixed now.
• OpManager Storage Monitoring : Alarm generation/ alarm rearm issues were noticed for CISCO device models with the CISCO MDS device templates when the port was down/up. This issue has been fixed now.
• OpManager Storage Monitoring : Issues were noticed on data collection for certain performance monitors of NetApp ONTAP devices. Those issues have been resolved now.
• OpManager Storage Monitoring : Previously, when users tried to add storage devices belonging to the EMC VNX Block template, the action failed. This issue has been fixed now

Build No 125415 - June 25, 2021

• General: Two-Factor Authentication (TFA) can now be enabled to provide an additional layer of security.
• General: There was an issue when upgrading Enterprise edition to version 12.5.399 or above if Auto Login was configured in AD Authentication. This issue has now been fixed.
• General: There was an issue in assigning scope for new AD users when multiple groups were configured for Selected Group based AD Authentication (from version 12.5.399). This issue has now been fixed.
• OpManager: Sometimes, when we edit Notification Profile, wrong configuration shown instead of actually configured criteria and severity, which when updated and saved causing duplication of Notification triggers. - This has been fixed
• OpManager: Device and URL filters will now be available in the Data Collection page under Audit Reports.
• OpManager: In the Notification Profile device association page, devices were not listed based on the probe filter. This issue has now been fixed.

Build No 125414 - June 22, 2021

• OpManager: A new “Push mode” has been introduced for agent-server communication. In this new mode, the server will notify the concerned agents to contact the server and update monitor details, instead of the existing “Pull mode” where the agents themselves periodically check with the server. This allows users to scale more by optimising frequency of communication by agents and reducing bandwidth consumption.
• OpManager: During File monitor related data collection, there was a high inflow of data to the Central server from Probe servers resulting in reduced server performance. This has been optimised now.
• OpManager: The agent-server communication for the Failover server has been optimised for better performance.
• OpManager: There were data collection issues for VMware Datastores due to UUID mismatch. This has been fixed now.
• OpManager: In a few device templates, the category was wrongly pre-populated as "UCS". This has been fixed, and now the category “Server” is assigned by default.
• OpManager: Previously, the device discovery failed when the IP Address or DNS Name of a new device trying to be added into OpManager was identical to the unique name of an existing device or Subnet. This issue has now been fixed.

Build No 125413 - June 15, 2021

• OpManager Plus: Backward compatibility is provided to support the old license model.

Build No 125411 - June 09, 2021

• OpManager: VPN Monitoring (Site-to-Site) is now supported for the following vendors: Cisco, Watchguard and Fortinet.
• OpManager: Previously, the zoom value was not updated for Business View widget in the NOC View. This issue has now been fixed.
• OpManager: Previously, the grid on/off option in the Business view page was not working in Google chrome browser. This issue has now been fixed.
• OpManager: In the Business View Summary widget, the rack, floor and shortcut of the selected business view had issues with redirecting to the corresponding pages. This has now been fixed.
• OpManager: The interface reports under Health and Performance reports had an issue with fetching the '95th percentile value’, when the ‘View All records’ filter was chosen. This has now been fixed.
• NCM: Earlier, there was a UI glitch when users tried to sync vulnerability DB in the Firmware Vulnerability tab. This has been fixed now.

Build No 125410 - June 07, 2021

• OpManager: The OpManager-ServiceDesk Plus integration (for both Cloud and On-Premise) has been optimised for better performance, and a few minor issues have been fixed.
• Enterprise Edition: With the 12.5.310 version upgrade, the admin status and operator status of interfaces as recorded in the Probes were not updated in the Central. This has been resolved now.

Build No 125405 - July 21, 2021

• General: There was an issue with loading the ‘Custom HTML or Text’ widget in NOC Views in versions 125379 and above. This issue has now been fixed.
• OpManager MSP : There was an issue when editing Customer Administrator/Customer Operator user configurations in versions 125399 and above. This issue has now been fixed.

Build No 125399 - June 01, 2021

• General: User Management now supports custom role creation.
• General: Previously, Add-On Modules were enabled/disabled globally. Enabling/disabling Add-On Modules is now user specific.
• General: Users can now choose to show/hide Add-On Modules for which they have been authorized.
• General: There was an issue when restoring backup during MSSQL installation after the 125301 upgrade. This has now been fixed.

Build No 125398 - May 27, 2021

• OpManager: In the alarms short summary page, there were certain link redirection issues which have been fixed now.
• OpManager: Users faced an issue while selecting devices from the drop down menu in the Trap Settings page. This issue has been fixed now.
• OpManager: In Chinese installations, the RCA content in the Apps tab was displayed as garbled text previously. This has been fixed.
• OpManager: When a script monitor was deleted, the existing alarms related to that monitor were not deleted. This has been fixed now.
• OpManager: Previously, HTTPS had to be enabled manually for the agents when SSL was enabled from the OpManager web client. This has been fixed now.
• OpManager: After agent upgrade, there was a communication issue when the agent upgrade got initiated before OpManager startup was performed properly. This has been fixed.
• OpManager: For existing log file agents, there were issues with log file monitoring alerts since monitor details were not synced with the agent. This has been fixed.
• OpManager: Now during mapping of an agent from the Agents page, the corresponding device is shown as the top suggestion to enable easier association.
• OpManager: There was an issue with agent registration in OpManager due to value mismatch of few parameters. This has been resolved.

Build No 125397 - May 24, 2021

• General: PostgreSQL has now been updated to version 10.16.
• General: The PostgreSQL vulnerability issues from version 10.12 have now been fixed.
• General: There was an issue with HTTP Strict Transport Security (HSTS) header for login and logout pages. This issue has now been fixed.
• General: Password complexity will now be set to ‘Complex’ by default. The ‘Simple’ option has now been removed. PPM users with ‘Simple’ password complexity will be notified to change their password.

Build No 125394 - May 12, 2021

• OpManager: There was an issue with discovering HP iLO devices with lower firmware versions due to an incorrect API format. This has been fixed now.

Build No 125393 - May 11, 2021

• OpManager Plus: The Device-based licensing model for OpManager Plus has been revamped to suit a more integrated IT operations management experience.
• OpManager: Previously,e the range of y-axis values for percentage graph was 0 to the max point of the graph. Now it has been changed to 0 to 100.
• NetFlow: The NetFlow Analyzer Essential Edition has been renamed as the NetFlow Analyzer Professional Edition.
• NetFlow: WLC access points will henceforth be considered as interfaces for licensing.

Build No 125392 - May 05, 2021

• OpManager: Previously, the MAC address and Rogue SSIDs were garbled in the WLC device snapshot page. This issue has now been fixed.
• NCM: Earlier, there was a UI slide issue while adding devices from OpManager to NCM. This has been fixed now.
• NCM: Users can now detect Palo Alto devices running on vulnerable firmware versions.

Build No 125386 -July 12, 2021

• Enterprise Edition: With the 12.5.310 version upgrade, the admin status and operator status of interfaces as recorded in the Probes were not updated in the Central. This has been resolved now.
• Enterprise Edition : Smart upgrade was not triggered when a Probe was down during the Central upgrade process. This issue has been fixed and a Probe gets upgraded automatically when it is started.
• Enterprise Edition : The imported SSL certifications of old customers were automatically self signed after migration. This issue has been fixed now.
• OpManager : Previously, the Active Directory (AD) dashboard in the device snapshot page of the Domain controller did not show up properly. This has now been fixed.
• OpManager : During rediscovery, the DNS name of the device was not updated if the ‘Poll Using IP Address’ option was enabled. This issue has now been fixed.
• OpManager Storage Monitoring : Users were unable to delete or unmanage certain storage devices as their details were found missing in the list. This caused problems during log in, but the issue has been fixed now.
• OpManager : Previously, interfaces were not discovered for SNMPv3 devices from the Interface discovery page. This issue has now been fixed.
• OpManager: The ‘Ping Device’ action under Workflow had issues with the configured count of the ICMP ping packets that were sent to devices which were down. This has now been fixed.
• OpManager: With the 12.5.229 version upgrade, users noticed slow load speed while accessing the All Alarms/Active Alarms page on the UI. The load speed has been optimized now.
• OpManager: In the WAN RTT and VoIP monitors report, the ‘Date And Time’ value for hourly data was not displayed properly. This issue has now been fixed.
• OpManager: There was a minor issue with displaying multiple interfaces in the Rediscover Interfaces page when rediscovery was performed. This has been fixed now.

Build No 125382 - May 11, 2021

• General: Previously, there was an issue during upgrade if multiple constraints were missing in the Database. This issue has now been fixed.

Build No 125381 - April 30, 2021

• OpManager Storage Monitoring: OpManager now monitors the Disk status and Disk health of IBM DS series device models.
• OpManager Storage Monitoring: OpManager now monitors the Disk Status, Port Status, Fan Status, Powersupply Status, Battery Status, Temperature sensor value for NetApp ONTAP (CLUSTER) devices.
• OpManager Storage Monitoring: OpManager now monitors Disk Status, Power supply status, Temperature Sensor value for EMC Isilon storage device models.
• OpManager Storage Monitoring: The threshold value for the disk status monitor of IBM Spectrum Virtualize did not attain rearm value even when the disk was replaced. This issue has been resolved.
• OpManager: Users can now schedule and export the integrated reports in XLS file format.
• OpManager: More flexibility is now available in choosing the time period for advanced report generation.

Build No 125380 - April 28, 2021

• OpManager: There was an issue while adding a Counter64-type OID as a custom monitor since the OID returned a garbled value, resulting in it being treated as a string-type monitor. This has been fixed now.
• OpManager: There was an issue with real-time widgets, due to which the graphs were not properly rendered as images in the embedded widget. This has been fixed now.

Build No 125379 - April 27, 2021

• General: Microsoft SQL database version 2019 (15.x) is now supported.
• General: Sometimes, even when MSSQL database was selected, the installation happened with Postgres database. This issue has now been fixed.
• General: Previously, it was not possible to configure Failover settings when the ‘Email Address’ field was not empty. This issue has now been fixed.
• General: Virtual IP address will now be removed from the server in Failover enabled setups when the OpManager service crashes.
• General: User login and logout actions will now be captured in Audit Logs.

Build No 125378 - April 19, 2021

• OpManager: You can now update the availability monitoring protocol (ICMP, TCP and SNMP) for devices in bulk from the Inventory page.
• OpManager: Previously, the interface name was duplicated for interface graph widgets added via ‘Add as widget’ option from the interface report builder page. This issue has now been fixed.
• OpManager: Previously, there were issues with the ‘Time Window’ filter in the scheduled interface bandwidth report. This has now been fixed.
• OpManager: While generating interface reports (under Health and Performance reports), the data for the last day of the month was missing when the ‘last month’ filter (with Business Hour rule enabled) was selected. This issue has now been fixed.
• OpManager: Under Network and Server tab, the interface count and interface filters count was incorrectly displayed when there were more than one category of devices. This issue has now been fixed.
• OpManager: In the Central server, there were issues while choosing the device filters (Business View, Group, etc.) during device template association, notification profile association, creating business views, etc. This has now been fixed.
• NCM: Earlier, there was a stored XSS vulnerability in the Spark gateway due to custom terminal hostname parameter, reported by Ranjit Pahan. This has been fixed.
• NCM: Earlier, the auto SSH/Telnet option didn’t work for custom terminal devices. This issue has been fixed.

Build No 125377 - April 14, 2021

• OpManager: There were loading issues with notification profiles when URL criteria was selected, due to which the Notification Profiles page had a higher loading time. This has been fixed now.
• OpManager: The “Export as PDF/Excel” option was not working properly for the following Virtual Server reports - Datastore vs VMware-Host Mapping, Datastore vs VMware-VM Mapping and HyperV-Host vs Disk Mapping. This has been fixed now.

Build No 125376 - April 12, 2021

• OpManager: A new feature 'SDN monitoring for Cisco Application Centric Infrastructure (ACI)' has been added. You can now monitor the fabric, tenant, endpoint groups and the overall performance of your Cisco ACI environment.
• NetFlow: Support ID : 6630291: Criteria-based ‘Favorite Report’ has been introduced for Forensics report.
• NetFlow: Support ID : 6713522, 6765483 : NetFlow Analyzer integrates with ManageEngine ServiceDeskPlus Cloud for Notification Templates.
• NetFlow: Support ID : 6665423: Introducing support for NBAR2 Application data in IPGroup Report in Dashboard widgets.
• NetFlow: Support ID : 6763573 : One Offender and Target IP address will be displayed in place of count place in the main attacks list.
• NetFlow: Support ID : 6772844 : Issue in configuring 10.0.0.0 IP Network during IPGroup configuration has been fixed.
• NetFlow: Support ID : 6722060 : sFlow negative graph issue has been fixed now.
• NetFlow: Support ID : 6802123 : Issue in sorting Device groups in the Inventory has been fixed.
• NetFlow: Support ID : 6779940 : ‘No traffic data shown’ was displayed for PFSense firewall device. This issue has been fixed.
• NetFlow: Support ID : 6806564, 6847133 : BCP error due to ‘dropped flows file not found’ has been fixed.
• NetFlow: Support ID : 6667292, 6665820, 6585682, 6470811 : Deleting interface/device handling for license management and rediscovery.
• NetFlow: Business hour, Exclude weekends, and Time Frame options have been provided for Forensics report for interface, WLC Device, Multicast, Medianet, Appflow Reports, and Drill down graphs.
• NetFlow: Application group and Geolocation widgets have been introduced for the NFG Interface.
• NetFlow: Geolocation status info will now be displayed in the Geolocation reports page.
• NetFlow: Collector specific IP groups can now be created along in addition to the All collector view in CS.
• NetFlow: Inventory User and Cloud list will be first sorted based on names and then IPs.
• NetFlow: NetFlow Generator tool crashing when started in command prompt while was already running as service has been fixed.
• NetFlow: Non English characters in NetFlow Alert Profile email subject got garbled while applying ppm. This issue is now fixed.
• NetFlow: NFA DE alarms from Collector were not pushed to Central server post the recent upgrade. This issue is now fixed.
• Firewall: ManageEngine ServiceDesk Plus On-Demand integration support in 'Notification Template’.
• Firewall: Most, Least and Unused rule object reporting based on traffic usage.
• Firewall: Support ID: 6691033 - Security Audit report support for PaloAlto device.
• Firewall: Support ID: 6272805 - Traffic related dashboard widgets to show the data in GB/MB/KB based on its value instead of showing it in MB by default.
• Firewall: Support ID: 6701721 - Rule comparison parsing issue for Check Point device is fixed.
• Firewall: Support ID: 6744849 - FortiGate security audit report TACACS+ user configuration data is shown wrongly. This issue is fixed.
• Firewall: Support ID: 6699258 - FortiGate security audit report shows wrong data for section 'Not All Firewall Policy Accept Rules Log Access’. This issue is fixed.
• Firewall: Support ID: 6654103 - Unable to add multiple IP networks in Intranet settings due to restriction in Security XML This issue s fixed.
• Firewall: Support ID: 5296865 - Security Event report is not populated for Check Point device due to parsing issue. This issue is fixed.

Build No 125375 - April 08, 2021

• OpManager: The Add/Edit URL monitor pages have been revamped for better user experience.
• OpManager: Now with dedicated error messages for different failures related to URL monitoring, users can better understand and troubleshoot URL monitoring-related issues.
• OpManager: While using the custom time period filter option in reports, the business rule and business hour filters were applied automatically. This issue has been resolved.
• OpManager: From now, users can only monitor upto 5 URLs without having to purchase a license. If more than 5, a separate “URL add-on license” has to be obtained based on the number of URLs you wish to monitor.
• OpManager: While creating a schedule report, no devices were shown for selection under the available devices when manual grouping was selected. This issue has been fixed now.
• OpManager: There was a redirection issue when users accessed a logical device group from the alarm short summary page. This has been fixed now.
• OpManager: The option to add Alarm Variables, is now available for all the tasks performed through Workflow.
• OpManager: The option to translate trap OIDs into corresponding MIB data has been introduced in the OpManager UI now.
• OpManager: Rarely, certain scheduled reports were deleted, when the monitored device was removed. This issue has been resolved.
• OpManager: When the Business Hour rule was selected while creating an advanced report for the Interfaces, the report failed to fetch monitor values. This issue has been resolved now.
• OpManager: While scheduling a report, the parent group comprising of sub groups will not be available as a configuring criteria. Only the individual groups of devices and groups of interfaces will be available
• OpManager: Workflow logs can now be accessed only by full access administrators.
• Enterprise Edition: With the latest enhancement of the Smart Upgrade feature, users can now view the Probe upgrade status in OpManagerCentral’s UI.
• Enterprise Edition: When the Central failover occurred, the Probe failover failed to occur due to communication issues. This has been resolved now.
• OpManager: The Recent Alarms widget is now available in the snapshot page of a storage device.
• OpManager: From now, the Path and Arguments fields of a Process Monitor can be modified from the Device Snapshot page of the associated device.
• OpManager MSP: ServiceDesk Plus MSP integration has been introduced in this version of OpManager MSP. With this, users can easily log the alerts generated from OpManager MSP as tickets in their ServiceDesk Plus MSP instance.

Build No 125367 - June 02, 2021

• General: There were compatibility issues with older versions of OpManager when trying to integrate with ServiceDesk Plus versions 11200 and above. It has been fixed.

Build No 125366 - May 11, 2021

• General: Previously, there was an issue during upgrade if multiple constraints were missing in the Database. This issue has now been fixed.

Build No 125364 - April 01, 2021

• General: There was an issue in ServiceDesk Plus On-Demand related APIs. This issue has now been fixed.

Build No 125362 - March 26, 2021

• OpManager: The SparkGateway package has been upgraded to the latest version (SparkGateway 5.9.0) due to a path traversal vulnerability reported by David. (Refer CVE-2021-20078)

Build No 125361 - March 24, 2021

• General : Unknown patches will now be restricted from being applied to the installed application.
• General : There was a possibility for ‘backup’ to fail while starting the Postgres database, due to a ‘Permission’ related error. This issue has now been fixed.
• General : Previously, it was not possible to save System Settings if the date-format had a single quote ( ' ) in it. This issue has now been fixed.
• OpManager : If OpManager was started from command prompt and the license was applied from command prompt as well, the notification logger was not initialized, leading to a Notification Profile error. This issue has now been fixed.
• OpManager : If a recurring trigger is scheduled while configuring a Notification Profile, emails will only be sent if the severity of the event matches the severity selected.
• OpManager : Previously, if an interface alarm with the “clear” severity was raised for an interface that was already in the “clear” state, then Notification Profiles for that alarm weren’t triggered. This issue has now been fixed.
• OpManager : While querying from the database, the list of Notification Profiles were not in order. This sometimes resulted in sub-profiles being listed before parent profiles, causing issues in listing profiles. This issue has now been fixed.
• OpManager MSP : There was a websocket connection issue when Probe name contained a space. This issue has now been fixed.
• Firewall : Multiple privilege escalation vulnerabilities reported by Ranjit Pahan have been fixed.

Build No 125360 - March 19, 2021

• OpManager: A new “Raise alerts for Physical NIC & Host Bus Adapter” option has been introduced under the Update Inventory window, to raise alerts for Physical NIC and Host Bus Adapters of VMware devices based on their status (if enabled). This option will be made available under the Credentials tab during discovery, and also in the Update Inventory window.
• OpManager: There was a minor issue with VMware LUNs where the LUN and Path Count fields displayed the value as zero even though the LUN had been allocated. This has been fixed now.
• OpManager: There was an issue with syncing edited Event Log Rules from the Central to the Probe servers, due to which a few parameters were synced incorrectly. This has been fixed now.
• OpManager: There were issues with ESX discovery, due to which ESX servers available under existing vCenters were discovered as new parent devices. This behavior has been fixed now.
• OpManager: There was an issue with the Save button for Enable/Disable Custom Dials in the Device Snapshot page, due to which users had trouble enabling/disabling custom dials. This has been fixed.
• OpManager: In some cases, the URL links in the URL monitors tab under the Device Snapshot page were not functioning as intended due to a minor issue. This has been fixed.

Build No 125359 - March 15, 2021

• OpManager: A new task 'Log a ticket (Jira Service Desk)' is now available under External Actions in OpManager workflows. With this workflow task, users can directly create alerts from OpManager as tickets in Jira Service Desk.

Build No 125358 - March 10, 2021

• OpManager : In MSSQL installations, the data points were not properly shown in the IP SLA widget line graphs when the selected time period was ‘Last 30 Days’ or 'Last 90 Days’. This issue has now been fixed.
• OpManager: Issues with line graph time label in the IP SLA monitor snapshot page has now been fixed.
• OpManager: Previously, the interface name was duplicated for interface graph widgets added via ‘Add as widget’ option from the interface report builder page. This issue has now been fixed.
• OpManager: Around 12 new device templates and additional performance monitors have now been added for the proper classification of devices during Network Discovery.
• OpManager: Previously, there were issues with accessing the device snapshot page from the NFA Inventory if the device was marked as ‘ExternalNode’ in OpManager. This issue has now been fixed.
• NCM: There was an issue while trying to add devices to NCM in OpManager and NetFlow Analyzer instances. This has been fixed now.

Build No 125346 - February 26, 2021

• OpManager: Meraki REST API monitoring is now supported in OpManager.

Build No 125344 - February 24, 2021

• OpManager: OpManager now supports IPMI-based hardware monitoring for select vendors. By adding the IPMI devices into OpManager, users can intensively monitor server hardware metrics like Fan, Temperature, Memory, Processor and Disk Array data.
• OpManager: In the “Processes by CPU/Memory Utilization” report, there were data alignment issues when the report was exported as PDF/Excel. This has been fixed now.
• OpManager: Previously, no devices were listed in the ‘Devices’ tab under Settings -> Discovery -> Rediscovery -> Rediscover Devices. This issue has been fixed now.
• OpManager: Previously, the device list was empty when configuring the link between a business view shortcut and a device in the Business View map page. This issue has been fixed now.

Build No 125343 - February 19, 2021

• OpManager: Users faced issues when some workflows were executed manually, this issue has been fixed.
• OpManager: Under the Devices module of Advanced reports, a new category on Stack switches has been added now.
• OpManager: OpManager now supports QNAP QTS Storage device models.
• OpManager: When the configured threshold of a storage monitor has violated an indication is shown in the storage tab.
• OpManager: Incorrect values were noted in the data collected under the Volume related parameters for NetApp devices. This issue has been fixed.
• OpManager: When a Synology Raid device was discovered using the SNMP v3 credentials, users experienced an issue during data collection. That issue has been fixed now.
• OpManager: When the HP EML/ESL tape library device was polled for status availability, users experience an issue. This issue has been fixed.
• OpManager: Users witnessed an issue while deleting the devices that required storage licensing. This issue has been fixed.

Build No 125342 - February 16, 2021

• OpManager: During Network Discovery, the discovered devices were not added to the inventory when immediately moved from the ‘Approve/Ignore’ page (after the discovery process is completed). This issue has now been fixed.
• OpManager: An option to configure the value of availability threshold violation for IP SLA VoIP and WAN RTT monitors is now provided under Settings > Monitoring > IPSLA.
• OpManager: Previously, the characters '-' and ‘_’ were not supported while updating the target display name in the IP SLA monitor snapshot page. This issue has now been fixed.
• OpManager: Previously, in the WAN RTT Availability History report, the timeout value was displayed as ‘NULL’ or blank. This issue has been fixed now.
• OpManager: In some cases, negative values were displayed in the IP SLA Monitor Availability pie chart. This issue has now been fixed.
• OpManager: Support for vendor based WLC monitoring has been added for the following vendors: Aruba, Cisco, Huawei, Autelan, Hongxin and H3C.
• OpManager: Previously, the access points associated with the discovered Wireless LAN Controller were not listed in its snapshot page post rediscovery. This issue has now been fixed.
• OpManager: Previously, there were issues with enabling advanced monitoring for WLC devices post rediscovery. This issue has now been fixed.
• OpManager: An option to select custom time period is now provided in the business view dashboard page and ‘Dashboard View’ under the Network tab.
• OpManager: Export to PDF option is now provided in the business view dashboard page.
• OpManager: A new option ‘PAN view’ has now been added to the business view widgets. You can now view the entire map in the Business view widget.
• OpManager: Previously, there were issues with the pre defined SysOID criteria in the import device template. This issue has now been fixed.
• OpManager: Previously, the duplicate device entries restricted users from creating a new group or workflow. This issue has now been fixed

Build No 125341 - February 11, 2021

• OpManager: There was an issue pertaining to SSH/Terminal connection. This issue has now been fixed.

Build No 125340 - February 09, 2021

• OpManager: Now, users can set the granularity of data viewed in performance graphs using the Graph Display Settings page in Settings > General Settings > Database maintenance.
• OpManager: The OpManager-Slack integration has been fully revamped, and the API framework has been upgraded to version 2 to provide seamless integration with Slack. From now, the user will have more granularity when it comes to granting permissions for this integration.
• OpManager: Users can now send messages to private Slack channels, provided that the corresponding user profile has been invited to the channel.
• OpManager: Previously, the Hardware tab was not displayed for a few Check Point firewall devices due to mismatches in the “Device Type” field. It has now been fixed.

Build No 125329 - February 04, 2021

• OpManager: Users can now view the minimum, the maximum and the average value of the monitored performance metrics in Advanced reports.
• OpManager: The data inside certain performance monitor reports did not appear when the configured language was changed in Advanced Reports. This issue has been fixed now.
• Enterprise Edition: The load time on the client server was longer when the probe list on the Central server expanded with the addition of new probes. This slow load time issue has been fixed.
• Enterprise Edition: An option to change the existing Probe name has been introduced in the Central.
• General: There was an unauthenticated Remote Code Execution (RCE) vulnerability due to general bypass for the deserialization class, as reported by Johannes Mortiz. This has now been fixed. (Refer CVE-2021-3287)

Build No 125328 - January 29, 2021

• OpManager: Previously, when Trap Viewer receives a specific trap, its type was not set while creating Trap Processors. This issue has been fixed.
• OpManager: A new interface report (All Traffic) has now been added to the Report Builder under Inventory.
• OpManager: Under the Interfaces module of Advanced reports, users can now add monitors on Availability, Total Utilization and Total traffic.
• OpManager: Under the Devices module of Advanced reports, a new category on Hardware Details has been added now.
• OpManager: Previously, certain scheduled reports did not get triggered as per schedule. This issue has been fixed now.
• OpManager: OpManager can now seamlessly integrate with your Jira workspace to raise your network alerts as issues in Jira Service Desk (On Premise) and manage them efficiently. Users can configure the Jira integration from Settings → Third Party Integrations, after which Jira Service Desk (On Premise) will be available as an option under ‘Log A Ticket’ notification profile.
• OpManager: Users were unable to access the data when a Scheduled report in XLSX format was sent as an URL. This issue has been fixed.
• Enterprise Edition: The load time of the Probe login page was longer when the Central was not accessible from the Probe. This issue has been fixed
• Enterprise Edition: For enhanced security, HTTPS port configuration has been introduced in the installation shield of OpManager Central.
• Storage Monitoring: Previously the Device Template for storage devices cannot be modified, now it can be modified.

Build No 125326 - January 21, 2021

• OpManager: During scheduled rediscovery, the existing devices were automatically moved to ‘Unmanaged’ state, when the ‘Add as Unmanaged’ rediscovery rule was configured to the newly discovered devices. This issue has now been fixed.
• OpManager: Previously, during Network discovery, Linux devices were classified as ‘Unknown’ when the login message didnot have the term ‘Linux’ in it. This issue has now been fixed.
• OpManager: Previously, it was unable to discover devices via ‘Import from CSV’ option if the CSV file had ‘space’ characters in it. This issue has now been fixed.
• OpManager: An audit entry will now be made if the device uplink dependency is updated.
• OpManager: Previously, in a few cases, the downtime scheduler stopped working due to an internal thread lock issue. This has now been fixed.
• OpManager: A message will now be displayed in the device snapshot page when status polling is disabled for that particular device.
• OpManager: Previously, a few devices associated with the downtime schedule were not moved into ‘Managed’ state even after the corresponding scheduler has ended. This issue has now been fixed.
• OpManager: Previously, in Linux installations, the response time dial had issues in collecting data for devices whose availability was monitored via ICMP protocol. This issue has now been fixed.
• OpManager: Previously, the deleted Windows device templates were not able to be edited if created again during discovery. This issue has now been fixed.
• OpManager: Previously, for Chinese Installations, there were issues with saving the default attention alert message under Device Down Settings. This has now been fixed.
• OpManager: An option to enable or disable UPS default monitor alarms is now provided in the System Settings page.
• OpManager: Around 22 new device templates have now been added for the proper classification of devices during Network Discovery.
• OpManager: SNMP monitor OID correction is done for Beacon Operation Status and Beacon Admin Status monitors.

Build No 125324 - January 8, 2021

• General: In OPMPlus, Users will now be able to configure Failover with a Virtual IP Address. This helps in receiving flows, traps, syslogs and allows usage of a common URL to access the application.
• General: In build 125140 or above, if Failover was configured with Virtual IPAddress in Probe, then the Primary Probe’s status was updated wrongly in Central. This issue has been fixed.
• General: In build 125140 or above, if Failover was configured with Virtual IPAddress, the OpManager service showed an Invalid License error during startup, if Mac address based License was applied. This issue has been fixed.
• General: There was a scrolling issue with ‘Custom’ dashboards while hovering the ‘Dashboard’ tab. This issue has now been fixed.
• General: In NOC view, a white flash appears briefly while loading custom widgets in the dark theme. This issue has now been fixed.
• General: An option to enable/disable other products recommendation has now been provided in the System Settings page.
• General: We have introduced a password reset policy for the default ‘admin’ user account.
• OpManager MSP: Websocket connection between Central & Probe has been optimized.

Build No 125323 - January 5, 2021

• OpManager : Now, users can also view hardware sensor data related to Disk Arrays for servers with HP hardware.
• OpManager : There was an issue with storing collected data for a few numeric-type SNMP monitors. This has been fixed now.
• OpManager : In Probe servers, if any device was converted to an “Exchange” device by adding Exchange-related monitors, this change was not updated in the Central Server. This has been fixed now.
• OpManager : Previously during Nutanix discovery, the timeout configured in the credential profile was not used by OpManager, leading to timeout issues. This has been fixed now.
• OpManager : Sometimes, Nutanix discovery failed due to a minor issue in processing non-English characters for some of the fetched values. This has been fixed now.
• OpManager : When the ‘Test Action’ button was clicked from the Alarm Details page of a datastore-related alarm, the notification profile window was not displayed. This has been fixed now.
• OpManager : From now on, rules configured in the Discovery Rule Engine will also be applicable for all virtual devices.(VMware/HyperV/Xen/Nutanix)
• OpManager : For VM related alerts in Notification Profiles (“When any virtual device has problem” option), notifications were sent for both VMware events and VM threshold violations even when only one of them were selected. This has been fixed now.
• OpManager : There was a issue with VMware events, due to which there was a delay in receiving VMware event-related alerts. This has been fixed now.
• OpManager : There were issues with associating Notification Profiles from Add/Edit URL Monitor page, since the available profiles were not listed in that page. This has been fixed now.
• OpManager : In the Associate EventLog monitors page, there was a UI issue when trying to navigate to the next page. This has been fixed now.
• OpManager : Some of the API calls used in OpManager have been renamed as mentioned below:
  • ‘getPerfomanceMonitorDetails’ to ‘getPerformanceMonitorDetails’
  • ‘addPerfomanceMonitors’ to ‘addPerformanceMonitors’
  • ‘EditPerfomanceMonitor’ to ‘EditPerformanceMonitor’
  • ‘deletePerfomanceMonitors’ to ‘deletePerformanceMonitors’
• OpManager MSP : Previously, the discover device option was enabled in the getting started page of MSP Central, even if the probe was not started. This issue has now been fixed.
• OpManager MSP : An issue related to special characters in Probe name has been fixed.
• OpManager MSP : Customer based filter is now available in the Notification Profile creation while choosing devices.
• OpManager MSP : Previously, the customer rebranded values were not reflected in the respective probes. This issue has now been fixed.

Build No 125312 - December 29, 2020

• OpManager : The OpManager-ServiceDesk Plus integration has been optimized and a few minor issues have been fixed in order to improve user experience.
• OpManager : Initially, only basic fields were synced from OpManager to ServiceNow during asset sync. This behaviour has been improved, and now users can also sync other device details such as Location, Manufacturer etc.
• OpManager : Webhook integration feature has been optimized for better usability, and quicklinks have been added to make Webhook-related help documentation easily accessible to users.
• OpManager : Previously, deleting a device from OpManager would also remove it from ServiceDesk Plus. This behaviour has been modified, and now users can configure whether or not to delete the device from SDP using an option under SDP Integration Settings.
• OpManager : Previously, recurring triggers were not functioning properly for ‘Log a ticket’ action in Notification Profiles. This issue has been fixed now.
• OpManager : Now, users can choose to raise alarms from OpManager as events in ServiceNow (instead of incidents) by simply enabling an option in the ServiceNow settings page.
• NCM: Previously, there was a Remote Code Execution vulnerability and it is fixed now.
• NCM: Previously, there was a SQL Injection vulnerability and it is fixed now.
• NCM: Previously, there was an issue while discovering the devices without sysoids. This issue is fixed now.
• OpUtils : Previously, there was a lag in displaying the results of IPAM and SPM’s global search option. This issue has been fixed.
• OpUtils : Previously, there was a lag in displaying “Connected IP Details” report. This issue has been fixed.
• OpUtils : Previously, there was an issue in adding switches in SPM if their credential name included “+” character. This issue has been fixed.
• OpUtils : Previously, subnets couldn’t be added in the Custom Groups created. This has been fixed.
• OpUtils : Previously, there was an issue with marking multiple ports as Administratively Enabled / Disabled. This issue has been fixed.
• OpUtils : Previously, DNS Name was not shown in Reserved Static IP Addresses’ report. This data is now shown.
• OpUtils : Export option has been enabled for all the data sheets under Rogue Detection.
• OpUtils : Previously, in SPM Publish Reports, unmanaged ports were shown. This has been removed.
• OpUtils : Introducing OS Type report, to list OS types of managed IPs.
• OpManager : You can now see NCM and OpUtils data in OpManager central.
• OpManager : An option to choose interfaces between two shortcuts has now been provided in the link properties under Business view.
• OpManager : The live link status and interface details will now be automatically updated for the respective business views without refreshing the page.
• OpManager : Previously, the business view name was not displayed on hovering the mouse pointer in Inventory and Map pages. This issue has now been fixed.
• OpManager : The ‘Device already exists in OpManager’ error message displayed during device discovery from ‘Add Device’ and ‘Add Wireless Controller’ page will now have a redirection link to the related device snapshot page.
• OpManager : Henceforth, the device display name will not be automatically updated during rediscovery or scheduled discovery by default.
• OpManager : Traps were not received for certain devices in the OpManager versions 125201 and above. This issue has been fixed now.
• Enterprise Edition : Historical data received from Probe & gets processed in OpManagerCentral has now been optimized for better performance.
• Enterprise Edition : Alert Processing has now been optimized to efficiently handle more alerts in OpManagerCentral.
• OpManager : Huawei fusion 8.x Storage device can now be monitored with OpManager.
• NetFlow : Support Ticket : 6280722 : Introducing Management IP Mapping for SNMP parameter updates.
• NetFlow : Introduced the option to select interface-name type in bulk SNMP configuration.
• NetFlow, Firewall : Alarm-Profiles notification has been enhanced. With the new ‘Notification Templates’ feature, users can 1. Raise new incident-tickets in ManageEngine ServiceDesk Plus (or) ServiceNow, 2. Support Ticket : 6151588 : Get notified via Slack, 3. Support Ticket : 4291780, 4564710, 809679 : Get notified with sound alerts(Web-Alarm) in webUI, 4. Support Ticket : 5799336, 5641700 : Send ‘Syslog’ messages with event details, 5. Send ‘SNMP traps’ alerts with criteria and event details, 6. Support Ticket: 5566780, 6056880 : Run a system command when an alarm is triggered, 7. Support Ticket : 6232664 : Configure notifications with preset Email and SMS templates.
• Firewall : Rule Administration support for Cisco ASA using CLI.
• Firewall : Two new Industry compliance standards support based on firewall configuration data, 1. GDPR, 2. HIPAA
• Firewall : Backup files can be compared between latest and any configuration backup file.
• Firewall : Predefined alert configuration for ‘Normal’ alert profiles.
• Firewall : Rule Suggestion report generation and save for multiple time periods.
• Firewall : Alarm Profiles UI is revamped and merged multiple configuration pages into single page for more usability.
• Firewall : Support ID: 6401389 - On-demand ‘Mail’ and ‘PDF Export’ option for Change Management difference reports.
• Firewall : Support ID: 6253246 - Customer can generate ‘Raw Search’ reports with ‘URL Category’ and ‘Application’ criteria now.
• Firewall : Support ID: 6450788 - OutOfMemory Exception issue while generating Change Management difference reports for PaloAlto, WatchGuard, Sophos XG firewalls is fixed.
• Firewall : Support ID: 6268243 - Fortigate device rule ISDB data parsing issue is fixed.
• Firewall : Support ID: 6350784 - WatchGuard device rule ICMP service objects parsing issue is fixed.
• Firewall : Support ID: 6104702 - Scheduled report Save Location option is not working properly. This issue is fixed.
• Firewall : Support ID: 6398383 - Schedule report is not working when Intranet settings is configured. This issue is fixed.
• Firewall : Support ID: 6302212 - Parsing issue in SonicWall logs is fixed.
• Firewall : Support ID: 6305551 - FirePower deny log parsing issue is fixed.
• Firewall : Support ID: 6300962 - Failed VPN login report is not showing for Fortigate firewall. This issue is fixed.
• Firewall : Support ID: 6254628 - URL log parsing issue of Fortigate firewall is fixed.
• Firewall : Support ID: 6108516 - Unused objects data is not populated for rule suggestion drill down report issue is fixed.
• NetFlow : Application Forecast Report has been introduced.
• NetFlow : NetFlow Analyzer now allows you to create Schedule Profiles for Geolocation Report.
• NetFlow : Inventory Report types such as Layer4 , Layer7 and ASView can now be added in Schedule Reports separately.
• NetFlow : Support Ticket : 5685326, 5995751 : Conversation reports will now include average traffic speed value.
• NetFlow : Support Ticket : 6377319 : Traffic report did not display any data from the One-min file for Interface Group. This issue has been fixed.
• NetFlow : Support Ticket : 6414066 : Users were unable to generate Consolidated report for IPGroup. This issue has been fixed now.
• NetFlow : Support Ticket : 6425427, 6362464 : Introduced the option to change CBQoS graph y-axis in the readable format.
• NetFlow : Introduced the option to change the data order in CBQoS widget.
• NetFlow : Conversation network data did not load when raw data was enabled. This issue has been fixed.
• NetFlow : Compare Report & AS view snapshot did not display data. This issue has been fixed now.
• Firewall : Rule-Suggestion report generation and save for multiple time-periods
• OpManager : The polling mechanism for Service Monitors has been optimized to improve OpManager’s performance.
• OpManager : Now, the Average value of a monitor will also be displayed in the Graph page of the monitor, along with the Minimum, Maximum and 95th Percentile values.
• OpManager : From now on, if data collection for a WMI-based CPU utilization monitor fails, users can manually override the default WMIClass using an alternative value.
• OpManager : There were inconsistencies in storing absolute/delta data of performance monitors, across different data types. This has been fixed now.
• OpManager : Previously, the VLAN status was displayed as ‘Unknown’ for a few Cisco devices due to an inappropriate OID response. This issue has now been fixed.
• OpManager : Previously, the device status polling was not carried out properly for a few devices due to an internal thread lock issue. This issue has now been fixed.
• OpManager : Previously, associating credentials to a device from its device snapshot page resulted in incorrect SNMP version update. This issue has now been fixed.
• OpManager : During Interface Discovery, a ‘general failure’ error was thrown from the SNMP response while fetching the ifspeed values. This issue has now been fixed.
• OpManager : Previously, the ‘alarm cleared’ notification was sent for all device down alert severities irrespective of the chosen severity. This issue has now been fixed.
• OpManager : Purestorage API version compatible issue fixed.
• OpManager : IBM FS 840&900 storage device can now be monitored by OpManager.
• OpManager : Performance enhanced for data collection of Capacity monitors with RAID protocol for storage devices.
• OpManager : Devices using StorageAPI protocol can now be filtered using the StorageAPI filter that has been newly added in inventory. Storage device graphs that were accessed from the device snapshot page did not display data, when the name of the graph had a space. This issue has been fixed.
• Enterprise Edition : To check the connection between the Central and a Probe, a troubleshooting feature has been added.
• Enterprise Edition : The license of the Central server was previously not extended to a newly installed Probe. This issue has been fixed.
• Enterprise Edition : The issue on displaying the BCP maintenance page has been fixed.
• Enterprise Edition : Previously, central update failed when the Contact Name and Contact email details were changed in the probe. This issue has been fixed now.
• Enterprise Edition : There was a Remote Code Execution vulnerability in the Smart Update Manager (SUM) Servlet reported by Johannes. This has now been fixed.
• OpUtils : Previously, in build 125213 or above, there was an issue with listing subnets if Custom Columns have been configured. This issue has been fixed.
• NCM : Earlier, there were issues in the custom device templates and in the devices on which they were applied to. This has been fixed now.
• NCM : Earlier, there was an issue with the NCM database daily updates in OpManager when NCM was not enabled. This has been fixed.
• NCM : Earlier, some SysOIDs were incorrectly mapped to Cisco CatOS device templates. These SysOIDs have now been associated to the corresponding Cisco IOS Switch device template.
• OpManager : OpManager now supports agent-based monitoring too, allowing customers to monitor their Windows servers by installing a lightweight agent in those servers.
• OpUtils : IP Address Manager now supports Palo Alto Firewall DHCP servers and ISC DHCP Servers for subnet discovery.
• OpUtils : AD password field length has been increased to 100 from 50.
• OpUtils : Under IPAM, ‘DNS Server Name’ field length has been increased to 250 from 50.
• OpUtils : Under IP Address Settings, option to exclude specific MACs from being monitored to alert a change in MAC-IP combination, is now available.
• OpManager : Now, users can also integrate OpManager with ServiceDesk Plus On-Demand. This integration enables real-time synchronisation of requests and assets with SDP On-Demand.
• OpManager : In device specific Notification Profile, IPSLA monitors criteria will now be shown for Switches and Firewall devices
• OpManager : In Notifications Profile, selected IPSLA monitors were not saved properly. This issue has now been fixed.
• OpManager : Notification Profile widget in the IPSLA monitor snapshot page, did not list the profiles associated to it. This has now been fixed
• OpManager : Sometimes, when the Primary server is restarted, both Primary and Secondary services get started. This issue has now been fixed.
• General: In AD Authentication configuration, for the group based Auto-Login functionality, Custom container of users (OU) can now be specified.
• General: The group based Auto-Login functionality in AD Authentication will now have an option to specify the credentials to use for group membership retrieval. This option can be used when the AD user logging in doesn’t have the necessary ‘Read Member Of’ permission.
• OpManager : Sometimes, it was not possible to add widgets to default dashboard even when the option was enabled. This issue has now been fixed.
• OpManager : StorageAPI filter added in inventory page. XLS & Excel button hided in reports JQGrid. Data not loading with Storage Graphs name with space.
• OpManager: Cisco Switch Stack monitoring is now supported in OpManager.
• OpManager: Wireless LAN Controller (WLC) monitoring support has been added for the following device types: Aruba 7210, H3C WX5540H and H3C WX3520H.
• OpManager: Previously, during Discovery, the new devices or interfaces added to a Group were not auto-selected to contribute to the ‘Group Health’ status. This issue has been fixed now.
• OpManager: During discovery, some interfaces were not associated with their respective groups due to an error in the interface name evaluation. The ‘ifName’ value was wrongly evaluated instead of ‘Displayname’ of the interface. This issue has now been fixed.
• OpManager: Previously, the configuration values (such as thresholds, monitoring interval, etc) modified in a particular interface group was also reflected in others. This issue has now been fixed.
• OpManager: Previously, there was a delay in status polling for devices that existed in a Rack. This has now been optimized.
• OpManager: Previously, the GUI became unresponsive on updating the ‘displayname’ of devices in bulk via ‘CSV file Import’ option in the Update Device Displayname page. This issue has now been fixed.
• OpManager: When the associated SNMP credentials failed during rediscovery or scheduled rediscovery, the respective SNMP devices were incorrectly rediscovered as non-SNMP devices . This issue has now been fixed.
• OpManager: During scheduled device discovery, the devices that were added as ‘Unmanaged’ via Device Rediscovery Rule were polled for availability monitoring. This issue has now been fixed.
• OpManager: ‘Interface Availability’ monitor report can now be generated from the Reports Builder page under Inventory.
• OpManager: Quicklinks have been added to help the users with How-To and FAQs of configurations in the Inventory page.
• OpManager: Monitoring will now be initiated for idle interfaces that are moved from its ‘Unmanaged’ state and will not be further classified under Idle Interfaces.
• OpManager: Previously, The data collection for SNMPv3 devices were abruptly stopped when updating engine ID or during time synchronization in the device, This issue has now been fixed.
• OpManager: Previously, Incorrect credential information was updated to the devices when associating SNMPv3 credentials. This issue has now been fixed.
• NCM: Users can now backup F5 network device configurations via UCS files.
• NCM: Earlier, there was an issue in Diff View while trying to compare a configuration draft with the labeled baseline version. This has been fixed now.
• NCM: Earlier, there was an issue with Telnet connections in Spark gateway terminal. This has been fixed now.
• NCM: Earlier, there was an issue while connecting Spark gateway terminal after updating Host Name using SNMP. This issue has been fixed now.
• OpManager: Previously, there were issues in accessing a few external APIs from OpManager version 125228. This has now been fixed.
• OpManager: Interface widgets has now been optimized for improved Dashboard loading time.
• OpManager:The ‘Dynamic IP Update’ operation will now be logged in the Audit log messages.
• OpManager: You can now view the business views associated with your devices from its respective device snapshot page.
• OpManager: The ‘Auto align’ option has now been added to the ‘Edit Business View’ page. This will automatically align the elements in the respective business view.
• OpManager: An option to search the elements available in a business view has now been added.
• OpManager: An option to delete the background image in a business view has now been added.
• OpManager: Two new custom widgets - ' Devices Currently Down’ and ‘Interfaces Currently Down’ have now been added to the Central server.
• OpManager: Around 40 new device templates and additional performance monitors have now been added for the proper classification of devices during Network Discovery.
• OpManager: Previously, while updating custom field values via CSV file, an ‘Invalid Header’ error message was thrown when non-English field headers were present in the imported file. This issue has now been fixed.
• OpManager: Previously, garbled characters were displayed in the ‘device displayname’ column while performing device discovery via CSV import or updating device displayname via CSV import option (from Quick Configuration Wizard). This issue has now been fixed.
• OpManager: Previously, the column headers were missing for interface downtime reports when exported as PDF. This issue has now been fixed.
• OpManager: The ‘exclude days’ option for performance graphs has now been removed from the Schedule Report page in the device and interface snapshot pages.
• OpManager: Two new filters (Business View and Groups) have now been added to the Donut View under the Inventory page.

Build No 125233 - November 13, 2020

• Enterprise Edition: There was a Remote Code Execution (RCE) vulnerability in the Smart Update Manager (SUM) Servlet reported by Johannes Mortiz. This has now been fixed. (Refer CVE-2020-28653)

Build No 125232 - October 23, 2020

• OpManager: Users can now enable 30-day free trial for add-ons (NetFlow/NCM/Firewall/Oputils) from webclient.
• OpManager: The API framework for the ServiceDesk Plus integration has been migrated to version 3.

Build No 125231 - October 20, 2020

• OpManager: HyperV discovery and rediscovery has been optimized, and users can now choose to enable/disable the “Auto VM discovery” option during HyperV discovery.
• OpManager: The Device Snapshot page for HyperV hosts has been revamped, and users can now view all devices under a host from the “VMs” tab.
• OpManager: Now, Power On/Power Off tasks have been introduced for HyperV VMs too.
• OpManager: Previously, HyperV rediscovery failed when the host IP changed to a different IP after discovery. This issue has been fixed now.
• OpManager: Rediscovery process for VMware devices has been optimized, by using only the pre-associated credentials for rediscovery instead of using all available credential profiles.
• OpManager: A new “Data Collection Manager” feature has been introduced in OpManager, for users to view all data collection-related issues in one place. Any monitors/interfaces without ongoing data collection, and devices with credential issues can now be easily identified from the DCM Diagnostics page.
• OpManager: In Checkpoint firewall devices, when Value OID for a hardware sensor returned the output in decimal format, the sensor details were not stored due to an internal error. This has been fixed now.
• OpManager: In SNMP monitors, when the StringToNumeric functional expression was used for a string-type OID (set to Decimal), the response obtained was always zero. This issue has been fixed.
• OpManager: The monitoring interval for File Monitors were not updated properly in the Edit Monitor page, even after the value was modified by the user. This has been fixed now.
• OpManager: Now, the “Last Polled Value of a performance monitor” widget can also list the values of that monitor for multiple devices.

Build No 125230 - October 15, 2020

• General: In the NOC view page, sometimes it wasn’t possible to fit 4 equally spaced widgets in the same row. This issue has now been fixed.
• General: Dark mode was not applied to widgets that were embedded inside the ‘Custom HTML or Text’ widget. This issue has now been fixed.
• General: Database Migration from PGSQL to MSSQL and vice versa can now be performed in the same setup using DBConfiguration.bat
• General: Sometimes, rendering position of widgets was not in order when the network was slow. This issue has now been fixed.
• OpManager: Previously, the ‘Read/Write community’ and ‘Password’ fields (in credentials) did not support special characters such as '%’. This issue has now been fixed
• OpManager: The time taken to configure notification profiles (add/update/list profiles) for a large number of devices has been reduced for performance improvisation.

Build No 125229 - October 12, 2020

• Storage Monitoring: While monitoring the HPE 3PAR device, users identified a spike in CPU performance of the device in which the OpManager server was installed. This issue has been fixed.
• Storage Monitoring: HPE 3par storage device can now be monitored by OpManager using Rest API.
• Storage Monitoring: HPE StoreOnce Storage device can now be monitored with OpManager.
• Storage Monitoring: HPE Primera Storage device can now be monitored with OpManager.
• Storage Monitoring: Previously, because of disk name duplication, users were unable to add and monitor Huawei storage devices. This issue has been fixed now.
• Storage Monitoring: IBM DS Series can now be monitored with OpManager.
• OpManager: The APNs certificate expiry notification was previously sent to non-iOS users also. This issue has been fixed and currently only iOS users are notified about it.
• OpManager: In the Alarms page, while using the “Send Email” action on selecting the alarms, only the default message content could be sent. This issue has now been fixed.
• OpManager: A new field “Device Type” has been added in the Credential Associated Devices Reports under Inventory Reports.
• OpManager: While editing or creating a new workflow, there were issues with the “Schedule Trigger” option. This has now been fixed.
• OpManager: The issue on viewing the report generated for the monitor - Partition Details of the Device - as a widget in OpManager’s Dashboard has been resolved.
• OpManager: OpManager now monitors EMC Unity using API.
• OpManager: Workflow executions are now logged in the Audit log messages.
• OpManager: The issue on viewing reports generated for all the monitors as a widget in the Dashboard has been fixed.
• OpManager: Issues regarding the DayLight Saving time in Schedule Reports has now been handled.
• OpManager: When multiple reports are scheduled for generation in XLS format, a single consolidated XLS file containing all the reports can be obtained now.
• OpManager: In the New Advanced Report generation page, Alarms has been added as a Module Type and more monitors have been added to the existing list of Availability Monitors.
• OpManager: When Custom time period was chosen for filtering reports, the time window was automatically updated with default values. This issue has been fixed and users can specify their preferred time window.
• OpManager: When Device Availability Reports are scheduled for generation in XLS format, the file name displayed did not match correctly. This issue has been fixed.
• Enterprise Edition: Now, the Probe Admin will be notified thrice via e-mail whenever the Probe-Central communication is lost. If the connection is still not re-established, the corresponding probe server will be shut down on the 15th day.
• Enterprise Edition: If the Probe-Central communication is lost, upon reconnection, only the last 15 days archived data will be synchronized with the Central server.
• Enterprise Edition: In order to improve scalability, the Central Server’s heap size has been increased to 2 GB from the previous size of 1GB
• Enterprise Edition: Device filtering option based on probe is added in the add schedule page, add notification profile page, QCW(Notification profile) and group creation page.
• Enterprise Edition: Previously, the Central was generating certain false alerts apart from the actual alerts. This issue has been fixed.

Build No 125228 - October 6, 2020

• General : ManageEngine has now launched OpManager MSP - This new product targets managed service providers (MSPs) offering network and server monitoring as managed services. OpManager MSP offers distributed monitoring and multi-tenant options for managing their customers’ networks. Learn more.
• General : There was an issue is setting HTTP Strict Transport Security (HSTS) header in build 125140 or above. This issue has now been fixed.
• General : A promotional notification message to review the product has been added in the top band for Professional and Standard editions.

Build No 125221 - March 23, 2021

• OpManager: Previously, when the Forgot Password option was clicked, an error message was shown. This has now been fixed.

Build No 125216 - September 25, 2020

• OpManager: Hardware monitoring support is now available for Supermicro devices.
• OpManager: Now, OpManager supports the monitoring of a new parameter “Temperature sensor” in Cisco Nexus devices.
• OpManager: Now, you can also generate reports for script monitors from the Report Builder window.
• OpManager: In Cisco Nexus devices, there were some issues that resulted in duplicate fan sensor values being displayed. This has been fixed now.
• OpManager: Polling mechanisms for Windows and Application server polling have been optimized to improve OpManager’s performance.
• OpManager: While restarting OpManager, there were issues with hourly archiving of Availability monitoring data in certain cases. This has been fixed now.
• OpManager: There were issues with updating hard disk related data, due to which wrong values were displayed for the Disk Utilization monitors. This has been fixed now.
• OpManager: A new option to filter Hardware-monitored devices in the Inventory has been provided under the ‘Protocol’ filter.

Build No 125215 - September 22, 2020

• OpManager: 'Device Down Settings’, an option to customize the number of failed polls, severity, and messages for the Device Availability Alarms has now been added in the Configuration page (under the Settings tab).
• OpManager: Around 36 new SNMP based performance monitors have been added.
• OpManager: Wireless LAN Controller (WLC) monitoring support has been added for the following device types: Aruba 3400, Aruba 7010-US, Cisco AIR-CT8540-K9 and Cisco 1830.
• OpManager: You can now set display names for subnets under the Inventory page.
• OpManager: A search option for interfaces that appears while configuring links in the Business view has now been introduced in the ‘Link Properties’ page.
• OpManager: SNMP devices with duplicate ‘SysName’ were not added during Network Discovery even when the ‘Unique System DisplayName’ option was disabled. This issue has now been fixed.
• OpManager: While discovering devices from the Add Device page, the ‘Add Device Failed’ error message was incorrectly displayed if the response from the device was slow (due to environmental factors such as large interface count, etc). This issue has now been fixed.
• OpManager: Previously, while rediscovering a device from its Snapshot page, the previously associated credentials were sent along with the newly selected credentials in the API. This issue has now been fixed.
• OpManager: Previously, during Layer2 Discovery, the devices with multiple IP Addresses were added as separate devices. This issue has now been fixed.
• OpManager: During Layer2 discovery, the ‘Uplink Dependency’ was not set for the discovered devices whose parent device was the Seed Router. This issue has now been fixed.
• OpManager: Previously, few device mappings in the Layer2 map were not identified due to an internal error in the Layer2 discovery mechanism (LLDP and FDB based). This issue has now been fixed.
• OpManager: Previously, the category of Domain Controller devices were changed as ‘Server’ when the ‘Apply and Overwrite’ function was performed in the Device Templates. This issue has now been fixed.
• OpManager: The Interface Templates can now be associated to the Device Groups. Only the interfaces that match with the applied template will take effect.
• OpManager: OpManager can now fetch the value for the ‘Serial Number’ custom field using SNMP during Add Device, Network Discovery, and Scheduled Discovery. This support has been added for device models across 30 vendors.
• OpManager: Previously, the display name of the interface was not updated upon rediscovery if already modified in the GUI. This issue has now been fixed.
• OpManager: Separate columns for ‘Device Name’ and ‘Total Downtime’ are now provided in the Device Downtime report for improved readability.
• OpManager: A new column (IP Address) has now been added to Devices Availability, Servers Availability, and Domain Controller (DCs) Availability reports.
• OpManager: Previously, there were issues with the working of ‘Business Hour Rule’ time window filter for Availability Reports such as All Interfaces Availability, WAN Links Availability, Devices Availability, DomainController(DC) Availability and Servers Availability report. This issue has now been fixed.
• OpManager: Previously, the ‘Distribution’ data type chart in the Devices Availability Dashboard report displayed an additional graph (Not monitored) if the Custom Period was chosen and the Start/End Time was not the first date of the month. This issue has been fixed now.
• OpManager: Previously, in the ‘Distribution’ data type chart of Devices Availability Dashboard report, the ‘Not monitored’ bar graph was displayed even when there were no devices under the selected category. This issue has now been fixed.
• OpManager: Pagination has been done to optimize the Layer2 Maps list page under the Maps tab.
• OpManager: An option to delete maps has been added to the Layer2 Maps page.
• OpManager: An audit entry will now be made if the device templates are updated.
• OpManager: Previously, there were data collection issues in SNMP monitors associated with the devices discovered via the new Network Discovery page. This issue has now been fixed.
• OpManager: Devices that already existed in the Add-on modules (such as NFA,NCM,etc) were deleted and re-added into OpManager Inventory when tried to rediscover. This issue has now been fixed.
• OpManager: Previously, the ‘Add device’ operation failed due to the improper deletion of devices from the Add-On module (such as NCM,OpUtils,etc). This issue has now been fixed.

Build No 125214 - September 17, 2020

• When tickets were raised to the ServiceNow integration from OpManager, some tickets containing non-English characters were garbled. This has been fixed now.
• Previously, when any of the integrations got disconnected, the users were not notified in OpManager in any way. This behaviour has now been enhanced, and error messages are displayed in the configuration page of the integration, and also as a popup message on all pages.

Build No 125213 - September 14, 2020

• General: There was a possibility of a backup failure when Bulk Copy Program (BCP) was in another language. This issue has now been fixed.
• General: Previously, there was an issue while executing UniqueIDLinux.sh. This issue has now been fixed.
• General: There was an issue in displaying historical data in audit report. This has now been fixed.
• General: In MSSQL DB migrated setup, there was an issue with starting the OpManager service due to an incorrect database master key. This has now been fixed.
• General: Now, when registered license is applied, an option is provided to enter a secondary email for additional communication.
• OpManager: UCS Criteria was not shown in the Notification Profiles of UCS device snapshot page. This issue has now been fixed.
• General: In the global search page, when the page number at the bottom was clicked to navigate to a different page, the search window closed. This issue has now been fixed.
• OpManager: Previously, when the ‘Forgot Password’ option was clicked, an error message was shown. This has now been fixed.
• General: Previously, there was a thread lock issue that sometimes caused the product to not function as intended. This issue has now been fixed.

Build No 125212 - September 9, 2020

• General: jQUERY has been migrated to version 3.5.1 to avoid vulnerabilities.

Build No 125204 - December 28, 2020

• OpManager: Henceforth, the device display name will not be automatically updated during rediscovery or scheduled discovery.

Build No 125203 - November 13, 2020

• Enterprise Edition: There was a Remote Code Execution (RCE) vulnerability in the Smart Update Manager (SUM) Servlet reported by Johannes Mortiz. This has now been fixed. (Refer CVE-2020-28653)

Build No 125201 - September 3, 2020

• OpManager: When graphical reports are scheduled, the date of the report generation did not appear along with the time on the X-axis of the graph. This issue has been fixed.
• OpManager: Users were unable to view a scheduled report, if the Schedule Name of the report contained a dot (.). This issue has been fixed.
• OpManager : While entering the Name for a Workflow, other language characters were not supported. This issue is now fixed.
• OpManager: Trap port can now be configured in the UI.
• OpManager: Trap processing can now be enabled/disabled in the UI.
• OpManager: A new option has been introduced to limit the traps received (per hour) based on the Entity and Devices.
• OpManager: A new option has been introduced to filter the traps received based on Devices.
• OpManager: When the total number of Trap Processors crosses beyond 8000, the SNMP Trap Processors page in OpManager takes more time to load. This issue has been fixed.
• OpManager: When alarm entities with certain types of special characters appear, users were unable to perform actions like Clear, Acknowledge or Delete. This issue has been fixed.
• Enterprise Edition: Previously a Probe name with spacing was not supported. This feature has been enhanced and now users can enter Probe names with spacing.
• Enterprise Edition: A new option ‘Show All Sites’ has been introduced in the Report Settings.
• Enterprise Edition: When the Central and a Probe functioned with different protocols, the snapshot page of a device in Probe was inaccessible from the Central. This issue has been fixed
• Enterprise Edition: Now, users can install multiple probes in a single machine.

Build No 125198 - August 26, 2020

• OpManager: String-type and decimal-type values are also supported now in Script Monitoring.
• OpManager: Unicode characters are now supported for WMI credentials in OpManager, to allow usage of other language credentials.
• OpManager: Now, last polled value will also be displayed for string type monitors under Performance monitors tab in the Device Snapshot page.
• OpManager: There were issues with script monitors (Windows scripts) in other language installations. This has been fixed now, and OpManager will allow region-specific characters in other language installations.
• OpManager: There was an issue with folder monitoring-related alarms, where the alarm was raised before the alert was generated for the configured “Consecutive times” value. This has been fixed now.
• OpManager: There were issues in data collection with script monitoring in CLI-based devices, after the end device was restarted. This issue has been fixed now.
• OpManager: In Process templates, once the instance count threshold for a process was provided and saved, the value type for that field automatically changed from integer to decimal. This has been fixed now.
• OpManager: Under Process templates, if the instance count threshold was configured for any process template, then the template could not be associated to any device. This issue has been fixed now.
• OpManager: If the instance count threshold for a process was changed from the Monitors tab of the Device Snapshot page of any device, there were issues with saving it. This has been fixed now.
• OpManager: If the email of the user profile “admin” was updated in OpManager, there were issues with it being synced with the APM plugin. This issue has been fixed now.
• OpManager: On restarting OpManager, the email addresses of the users were not being synced properly with the APM plugin. This has been fixed now.
• OpManager: In Threshold Settings, there was an issue with raising alerts when the Consecutive Times count (failure threshold count) was reduced below the current failure count. This has been fixed now.
• Enterprise Edition: Now, audit entries will be made under General Audit in the Probe servers, for Script template Sync and Update actions.
• Enterprise Edition: Previously, there were issues with imported script templates being synced across all servers (Central to Probes, and vice versa). This has been fixed now.

Build No 125197 - August 21, 2020

• OpManager: ‘Cluster Marker’ functionality is now introduced in Zoho Maps. You can now cluster multiple markers and place them at closer proximities on the map without making it hard to read.
• OpManager: Previously, for Chrome browser versions above 80.0.3, the map location was not saved while performing the zoom-in or zoom-out function (of Zoho Maps) in the ‘Maps’ widget. This issue has now been fixed.
• OpManager: Previously, the Import Devices option under Device Categories was not working if the category name had non-english characters in it. This issue has now been fixed.
• OpManager: While creating or editing a Device Downtime Schedule, the Uplink Dependency hierarchy of the affected devices will now be represented in the form of a ‘tree structure’ for better usability.
• OpManager: Maintenance reports will now be sent to the email address configured in the respective Device Downtime Schedule, at the start and end of every schedule.
• OpManager: Around 20 new device templates and additional performance monitors have now been added for the proper classification of devices during Network Discovery.
• OpManager: Previously, due to an incorrect performance monitor name, the ‘Devices by CPU Utilization’ and ‘Devices by Memory Utilization’ reports had issues with listing all the related devices. This issue has now been fixed.
• OpManager: Previously, it was unable to access interface monitor graphs from the Interface Snapshot page. This issue has now been fixed.

Build No 125196 - August 18, 2020

• OpManager: In Device-specific Notification Profile, under the ‘When any ‘Selected’ Threshold rule violated’ criteria, few performance monitors with the same instance name were not listed. This issue has now been fixed.
• OpManager: In Email notifications, the dynamic variable “Dependent” was not being properly replaced by the Device display name. This issue has now been fixed.
• OpManager: In the Central Server, when trying to add/edit ‘Global Notification Profile’ after navigating from Device Snapshot page, VMDatastores were not listed. This has now been fixed.
• OpManager: In the “Notification Profiles Applied” report, the device details were not listed on clicking total count. This issue has now been fixed.
• OpManager: In the “Notification Profiles Triggered” report, even if the profile trigger was successful, sometimes it was recorded as a failure. This issue has now been fixed.

Build No 125195 - August 12, 2020

• OpManager Storage Monitoring: IBM storage devices that support IBM Spectrum Virtualize can now be monitored with OpManager.

Build No 125194 - August 7, 2020

• OpManager: OpManager now supports advanced reporting capabilities.
• OpManager: Push Notifications are not received in iOS mobile application due to issue in existing APNs certificate. This issue has now been fixed.

Build No 125193 - August 5, 2020

• OpManager: User level authorization of all APIs has been reconfigured for enhanced security.

Build No 125192 - August 4, 2020

• OpManager: Webhook integration has now been added to OpManager’s Notification Profiles. With this, users can configure Webhook calls to be made based on certain trigger criteria in OpManager.
• Enterprise Edition: Now, when asset details are being synced from Central/Probe with ServiceDesk Plus, the display name info will be sent instead of the device name.
• OpManager: Previously, there were some issues in syncing a few fields under Switch and Router categories (Field names: Manufacturer, Serial Number and Monitoring Protocol) with ServiceDesk Plus. This has been fixed now.
• OpManager: A few issues in the SDP Scheduler have been fixed, and the Scheduler has also been optimised for better performance.
• OpManager: In builds 125157 and above, the ‘Edit Probe Details’ pop-up under the Probe Details option in the Central server could not be updated. This issue has now been fixed.
• OpManager: In builds 125157 and above, the Notification Settings in the OpManager iOS application could not be customized. This issue has now been fixed.
• OpManager: String monitors that appear under “Monitor” Category during new report creation have now been hidden to prevent the generation of irrelevant reports.
• OpManager: The word count for an email triggered by a Workflow has been increased to 1000 characters.
• OpManager: Issues in deleting the sub-folders using the “Delete Older Files” option in Workflows have now been fixed.
• OpManager: There were some issues with log file monitoring in OpManager. This has been fixed now.

Build No 125181 - July 30, 2020

• OpManager: OpManager now supports VMware vCenter version 7, for easy discovery and real-time monitoring of your VMware devices.
• OpManager : Previously, there were timeout-related issues while establishing connection with vCenter/ESX. This has been fixed now.
• OpManager : Previously, the devices discovered via the new Network Discovery page faced issues with data collection in non-SNMP monitors and device addition into the Add-on modules (such as NCM and OpUtils). This issue has now been fixed.
• OpManager: OpManager now supports monitoring of VMware PMEM datastores.
• OpManager : Previously during ESX-based discovery, VMware VMs migrated to a different host were not monitored as “VMware-VM” by default unless Auto VM discovery was enabled in the new host. This behavior has been modified, and migrated VMs will be monitored even without Auto VM discovery being enabled.
• OpManager : When adding new VM-related Device Templates or editing existing templates, monitors that use any other protocol will not be displayed in the Edit Template window. Also, only monitors that go along with that specific entity type (vCenter/Cluster/Host/VM) will be displayed.
• OpManager : Now, alarms for VM-related monitors with multiple instances will also contain the instance ID in the alarm message.
• OpManager : Polling frequency for Nutanix devices has been modified to maximize efficiency of data collection in OpManager.
• OpManager : There was an issue with displaying color bar graphs in the “Devices exceeding N% Disk utilization” widget. This has been fixed now.
• OpManager : There were issues with fetching proper values for Memory Utilization monitor in Nutanix VMs. This has been fixed now.

Build No 125180 - July 24, 2020

• General: Previously, there was a login issue in the mobile app when Passthrough was configured in OpManager. This has now been fixed.

Build No 125178 - July 21, 2020

• General: There was a permission issue with Linux OS when initializing database during PPM upgrade. This issue has now been fixed.

Build No 125177 - July 17, 2020

• OpManager: Previously, the URL monitor name under Device Downtime Schedule was appended with ‘_URL’ text. This issue has now been fixed.
• OpManager : Previously, the Active Directory monitors and Performance monitors associated with the Exchange Servers were removed during schedule discovery. This issue has now been fixed.
• OpManager : Previously, during the network discovery of existing devices, on successful association of WMI credentials, the devices with ‘Unknown’ device type were wrongly classified as ‘Server’ instead of 'Domain Controller’. This issue has now been fixed.
• OpManager: Previously, during the network discovery of existing devices, the performance monitors were not associated with the devices when the device category was changed. This issue has now been fixed.
• OpManager: Previously, during Network Discovery, the existing virtual devices (VMs) were updated as Physical Servers. This issue has now been fixed.
• OpManager: Bulk delete option has now been added for the ‘VLANs’ widget in the Device Snapshot page and the ‘VLAN’ list view page under the Network tab.
• OpManager: Previously, during Device Availability polling (when the ‘poll using IP Address’ option was enabled), the IP Address of the device was updated when the device status was changed from ‘Critical’ to 'Clear’. This issue has now been fixed.
• OpManager: In Linux installation, the ping response timeout can now be configured using the ‘timeout’ property in the Ping.properties file. This helps in optimizing the Availability polling of devices that are not reachable.
• OpManager: Previously, the Device Snapshot page was failing to load when the category of the device was changed from Switch to UPS. This issue has now been fixed.
• OpManager: Previously, there were issues with creating groups due to an exceptional internal error that occurred during the restart of the OpManager service. This issue has now been fixed.
• OpManager: Previously, importing custom fields was not possible if the CSV file had random Chinese characters in it. This issue has now been fixed.
• OpManager: Previously, there were issues in updating the infrastructure snapshot widget in Probe. This issue has now been fixed.
• OpManager:Previously, incorrect data was displayed in Availability Reports when the ‘Time Window’ filter was configured for less than 24 hours. This issue has now been fixed.
• OpManager: Issues with the ‘Sort by Top/Bottom’ filter in the Device Downtime Report has now been fixed.
• OpManager : Previously, incorrect data was displayed in the Devices Availability report when data was fetched from the DAILY archive table for the custom time period. This has now been fixed.
• OpManager: Under Inventory, an option has been provided to update the availability monitoring protocol (from ICMP,SNMP to TCP) of devices in bulk.
• OpManager: A new report on ‘Uplink Dependency Devices’ has now been added under Inventory reports.
• OpManager: Previously, the display name of existing interfaces were not updated during scheduled Network Discovery. This issue has now been fixed.
• OpManager: In a few rare cases, duplicate interfaces were added when a device was discovered from the ‘Add Device’ page. This issue has now been fixed.
• OpManager: There were issues with executing actions from the Actions menu in Alarms and Web Alarms pages. This has been fixed now.
• OpManager: There were issues in VB script execution if the OpManager installed directory’s path had spaces in it. This has been fixed now.
• General: Previously, there was a reflected XSS vulnerability when the API key contained an XML-based XSS payload. This issue has now been fixed. (Reported by [email protected])(Refer: CVE-2020-19554)

Build No 125176 - July 14, 2020

• General: There was a possible RCE vulnerability in the installer tool. This issue has now been fixed.
• General: In AD Configuration, LDAPS is no longer mandatory. An option to choose between LDAP protocol and LDAPS protocol is now provided.

Build No 125175 - July 9, 2020

• OpManager Storage Monitoring: The CLI timeout issue has now been fixed for the IBM Storage Series V3X00/V5000/V7000.
• OpManager Storage Monitoring: Data collection issues with HP MSA and Dell Compellent storage devices have now been fixed.
• OpManager Storage Monitoring: Kaminario K2 Flash Arrays can now be monitored with OpManager.
• OpManager: Now, users can export the Workflow Logs report from OpManager in PDF/XLS format.
• OpManager: While creating a new report, protocol names are listed along with the monitors in the drop down list. For e.g, CPU Utilization (SNMP), CPU Utilization (WMI).
• Enterprise Edition: Previously, there were device mismatch issues between Central and Probe. This was due to the wrong ‘probe id’ being updated in DB while editing Probe details after restoration. This issue has now been fixed.
• General: If the alarm entity contained any special character or a non-English character, the alarm could not be deleted or cleared. This issue has now been fixed.

Build No 125174 - July 6, 2020

• OpManager : The Network Discovery module has now been enhanced for better user experience. Users will now be able to either ‘Approve’ the devices to be monitored or ‘Ignore’ the devices and discard them from the scanned device list during Network Discovery.
• OpManager : A dedicated Interface Discovery page has been added. Users will now be able to discover the interfaces based on a criteria that includes multiple device and interface properties.
• OpManager : A new option to directly add the devices from AD domain (Import from Active Directory (AD)) has been introduced under Network Discovery.

Build No 125163 - July 1, 2020

• General : Garbled characters (non English languages) appeared in the Web client due to the introduction of encoding in JVM. This issue has now been fixed.

Build No 125161 - June 24, 2020

• OpManager: While executing internal VB scripts, there was a password vulnerability discovered in OpManager. This has been fixed now.
• OpManager: Entries will now be created in Audit History for add/edit/associate/delete operations in Script monitors and Script templates and also for RDP access and Terminal access operations.

Build No 125159 - June 17, 2020

• OpManager: Now, tree view has been enabled for the left pane in the Inventory page. Users can group devices under this tree based on these criteria: Vendor, Category, Business View and Device groups.
• OpManager: The tree view is available in the Enterprise dashboard too, and it is also available as a widget to be added to custom dashboards.
• OpManager: Now, a number of additional device properties will be pushed to ServiceDesk Plus when assets are being synced from OpManager.

Build No 125158 - June 11, 2020

• General : Previously, the product startup was failed if the IP address was not resolved. This has now been fixed.
• General : Previously, in the API Access Audit report, there were issues with sorting reports based on date. This has now been fixed.
• General : Previously, it was unable to delete credentials that had ‘,’ character in it. This has now been fixed.

Build No 125157 - June 10, 2020

• OpManager : EMC Isilon storage device can now be monitored by OpManager using Rest API.
• Enterprise Edition: When the Probe name consisted of a non-ASCII character, the communication between the Central and the Probe failed. This issue has now been fixed.

Build No 125156 - June 5, 2020

• OpManager : Previously, any graphs in the Graphs tab in Device Snapshot page had loading issues when the graph name contained special characters or characters from other languages. This has been fixed.
• There were issues in displaying data in the graphs of MSSQL$ WMI monitor. This has been fixed now.
• Previously, there were sorting issues in the Top N Monitored values of any performance monitor widget. This has been fixed.
• Since the display name of script monitors were internationalised, it wasn’t possible to edit script monitors post-creation due to an internal issue. This has been fixed.

Build No 125150 - August 13, 2020

• OpManager: Push Notifications were not received in iOS mobile application due to issue in existing APNs certificate. This issue has now been fixed.

Build No 125149 - July 21, 2020

• OpManager: An issue while viewing the short summary page of an alarm in the external monitor is fixed.
• OpManager: Unable to redirect to Device Snapshot Page from the Short Summary page of an alarm. This issue has been fixed.

Build No 125148 - July 7, 2020

• Enterprise Edition: When the Probe name consisted of a non-ASCII character, the communication between the Central and the Probe failed. This issue has now been fixed.
• OpManager : In the Device Snapshot page, there was an issue with displaying custom SNMP monitor data in graphs for other language installations. This has been fixed now.
• OpManager : Previously, importing custom fields was not possible if the CSV file had random Chinese characters in it. This issue has now been fixed.

Build No 125147 - June 29, 2020

• General : Garbled characters (non English languages) appeared in the Web client due to the introduction of encoding in JVM. This issue has now been fixed.

Build No 125145 - June 3, 2020

• OpManager : A new report for ‘Interface downtime’ has been added under Availability and Response reports.
• OpManager : A new report ‘Devices by Added Time’ has now been added under Inventory reports.
• OpManager : Issues with the search option under Interface Inventory has now been fixed.
• OpManager : Previously, there were issues while initiating network discovery via CSV file, if the CSV file had random Chinese characters in it. This has now been fixed.
• OpManager : Issues with the ‘View Records’ filter under ‘All Interfaces by Utilization’ report has now been fixed.
• OpManager : In the Device Snapshot page, Router Graph tab will now appear only for Cisco routers as the monitor widgets in this tab are specific to Cisco routers.
• OpManager : IP SLA configuration for WAN RTT monitor with VRF, had failed if Trace Route (Path Hop) is enabled. This issue has now been fixed.
• OpManager : The Interfaces tab in the Device Snapshot page was shown under ‘Summary’ tab if the device was available in OpManager and NFA. It will now be shown in a separate tab.
• OpManager : Previously, the Downtime scheduler kept running even after the scheduled time when the URLs were configured. This issue has now been fixed.
• OpManager : Previously, the ‘Interface Name’ column was missing in the interface reports that were generated from the report builder and exported as PDF. This issue has now been fixed.

Build No 125144 - June 1, 2020

• General: PostgreSQL has now been updated to version 10.12.
• General: The PostgreSQL vulnerability issues from version 10.10 have now been fixed.
• General: Directory Traversal validation was being bypassed when using <cachestart>. This issue has now been fixed. (Reported by Yazhi Wang of Trend Micro and zerodayinitiative) (CVE-2020-13818)

Build No 125143 - May 29, 2020

• OpManager: Now, Active Processes and Installed Software tab is also being displayed for Domain Controller devices.
• OpManager: In Notification Profiles, there were issues in configuring a profile if the message/subject contained “Last Polled Value” variable. This has been fixed.
• OpManager: When a Xen VM was migrated to a different host after discovery, it was not monitored by default unless Auto VM discovery was enabled in the new host. This behaviour has been changed now, and the VM will be monitored even without Auto VM discovery being enabled.
• OpManager: There was an issue with calculating hard disk size in Linux devices when the capacity was more than 2 Terabytes, also leading to incorrect display of some disk related metrics. This has been fixed now.
• OpManager: There were issues in scheduling reports from the Graphs tab, in the Snapshot page of any device. This has been fixed now.
• OpManager: There was a widget loading issue in the “Last N hours CPU utilization” widget if the number of CPU instances was more than 5. This has been fixed now.
• OpManager: Issues related to hardware monitoring in some of the Cisco Nexus devices have been fixed.

Build No 125140 - May 19, 2020

• OpManager: Users will now be able to configure Failover with a Virtual IP Address. This helps in proper receiving of traps, syslogs and allows usage of a common URL to access the application.
• OpManager: The connectivity issues of RDP/Terminal in https mode has now been fixed.
• OpManager: Previously, there were issues with the Trap Notification profile when OPMANAGER-MIB was removed while sending traps. This issue has now been fixed.
• General: Previously, the backup functionality was not working for other language installations. This issue has now been fixed.
• General: Previously, there was an issue with the ‘Settings’ tab when logged in as AD user. This has now been fixed.
• General: Due to a file encoding issue in few languages, garbled characters were displayed in the product at some instances. This has now been fixed.
• General: Previously, there were issues with applying PPM over a backup restored build. This has now been fixed.
• General: The password for MSSQL database can now support upto 128 characters.

Build No 125139 - May 14, 2020

• OpManager: In the trap alarm page, the user is notified via a message when the trap port is blocked.
• OpManager: Previously, in the Alarms page, there were issues with the ‘Select all’ option when the left side panel filters were selected. This issue has now been fixed.
• OpManager: Custom SNMP monitors can now be configured for storage devices.
• Enterprise Edition: During Probe startup, if the license expires, the license file will be automatically downloaded from the Central server.

Build No 125137 - May 08, 2020

• OpManager: A new feature “WLC Monitoring” is introduced. You can now monitor Wireless LAN Controllers and their associated Access Points/SSIDs.
• OpManager: Over 25 new device templates with default performance monitors and 39 new SNMP based performance monitors have now been added.
• OpManager: Names of 20 vendor templates have now been updated to ensure proper device discovery.
• OpManager: Previously, device and interface Custom Fields were not properly updated in the alert notifications for languages other than English. This issue has now been fixed.

Build No 125136 - May 06, 2020

• OpManager : OpManager now also supports monitoring of Microsoft Exchange 2019 servers.
• OpManager : For memory utilisation monitors in Hyper-V VMs, there was an issue with accuracy of data displayed. This issue has been fixed now. (To prevent this from happening, the user will now have to enable dynamic memory in their Hyper-V environment.)
• OpManager : An option to sync the entity name with the display name has been introduced for ESX hosts and VMware VMs based on user preference.
• OpManager : Previously, there was a transaction deadlock issue during StatsDataSumHourly archive, due to which the action failed. This has been fixed now.
• OpManager : All AD-specific monitor, service and alarms data in real time is now readily available in a new ‘AD’ tab in the AD server’s Device Snapshot page.
• OpManager : Exchange server-specific monitors, services and alarms data is available in the ‘Exchange’ tab in the Device Snapshot page of your Exchange server.
• OpManager : Now, you can also associate process templates from the Process Monitors tab of your device’s Snapshot page, by using the ‘Associate Monitor’ button.

Build No 125129 - July 6, 2020

• General : After upgrading the product, there was an “Unable to start the product” error. This issue has now been fixed.
• General: Previously, the backup functionality was not working for non-English installations. This issue has now been fixed.
• OpManager : Previously, the ‘Search’ option in the Interfaces list view page under Inventory was not working. This issue has now been fixed.
• OpManager : OpManager : Previously, the ‘View Records’ filter was missing in the ‘All Interfaces by Utilization’ report, making it unable to view all the interfaces at once. This issue has now been fixed.
• OpManager : Previously, device and interface Custom Fields were not properly updated in the alert notifications for languages other than English. This issue has now been fixed.
• OpManager : Previously, importing custom fields was not possible if the CSV file had random Chinese characters in it. This issue has now been fixed.
• OpManager : Previously, there were issues while initiating network discovery via CSV file, if the CSV file had random Chinese characters in it. This has now been fixed.
• OpManager : In the Device Snapshot page, there was an issue with displaying custom SNMP monitor data in graphs for other language installations. This has been fixed now.
• OpManager : In the “Notification Profiles Triggered” report, even if the profile trigger was successful, sometimes it was recorded as a failure. This issue has now been fixed.
• OpManager: The connectivity issues of RDP/Terminal in https mode has now been fixed.
• Enterprise Edition: When the Probe name consisted of a non-ASCII character, the communication between the Central and the Probe failed. This issue has now been fixed.

Build No 125128 - June 24, 2020

• General: Garbled characters (non English languages) appeared in the Web client due to the introduction of encoding in JVM. This issue has now been fixed.

Build No 125127 - June 23, 2020

• General: PostgreSQL has now been updated to version 10.12.
• General: The PostgreSQL vulnerability issues from version 10.10 have now been fixed.
• General: Directory Traversal validation was being bypassed when using <cachestart>. This issue has now been fixed. (Reported by Yazhi Wang of Trend Micro and zerodayinitiative)

Build No 125125 - April 29, 2020

• General: Path Traversal vulnerability in URLs starting with <cachestart> has now been fixed. (Reported by R.J.McDown) (Refer CVE-2020-12116)

Build No 125124 - April 27, 2020

• General: Users will now be able to select from the default list of SMS providers (Clickatell, Twilio, SMSEagle) while configuring SMS Gateway, in the SMS Server Settings page.
• General: Previously, the recipient mobile number was not auto-populated while editing the SMS Notification Profile. This issue has now been fixed.
• General: Previously, the edit page for credentials did not show the saved details when non-English characters were present in the name of the credential. This issue has now been fixed.

Build No 125123 - April 23, 2020

• OpManager: Interfaces will now be managed and removed from Idle interfaces once the In/Out speed is updated.
• OpManager: Previously, when rediscovery was scheduled for existing devices, the primary interfaces that had subinterfaces were automatically unmanaged. This issue has now been fixed.
• OpManager: Previously, the Packet loss dial was collecting incorrect data in the Spanish version of Windows machines. This issue has now been fixed.
• OpManager: Previously, in some cases, the packet loss value was updated as ‘0’ in the Packet loss dial when the corresponding devices were down. This issue has now been fixed.
• OpManager: Previously, the Availability dials were displaying incorrect data when multiple tables were combined. This issue has now been fixed.

Build No 125121 - April 17, 2020

• OpManager: For HP 3PAR storage devices, statuspoll performance has been improved and the discovery time has also been optimized.
• NCM: The discovery API has now been upgraded to version 2.

Build No 125120 - April 16, 2020

• General: Unauthenticated access to API key disclosure from a servlet call. CVE-2020-11946 - @kuncho, an independent security researcher, has reported this vulnerability to SSD Secure Disclosure program. This issue has now been fixed.

Build No 125118 - April 9, 2020

• OpManager: Previously, there were issues with UnManaging and Managing of interfaces. This has now been fixed.
• OpManager: Previously, there was an issue in deleting interfaces during rediscovery. This has now been fixed.
• OpManager: Issues with the ‘Type’ filter in ‘listInterfaces’ API have now been fixed.
• OpManager: You can now fetch and sync device templates from OpManager’s shared repository.
• OpManager: A new option ‘Sync and Rediscover’ has now been added to the Device Snapshot page. It allows you to update specific sysOID based device templates from OpManager’s shared repository and rediscover devices with unknown type/category.
• OpManager: An enhancement to the Shortcut icon in Business View Widget has been made. You can now view the higher severity alarms triggered by the devices in a Shortcut by hovering your mouse over it.
• OpManager: The Group Snapshot page has now been optimized to load faster.
• OpManager: The number of packets sent for polling (ping) has now been reduced to 2.
• OpManager: Previously, for devices discovered through CSV files, the DisplayName did not support Non-English characters. This issue has now been fixed.
• OpManager: Any change in the IP address will now be logged in the audit report.
• OpManager: Previously, Group Status was displayed incorrectly when downtime was scheduled for it. This issue has now been fixed.
• OpManager: Top band will be hidden while scrolling down specific pages.
• OpManager: Previously, UCS devices were discovered as ‘Unknown’ when added from the 'Add UCS page’. This issue has now been fixed.

Build No 125117 - April 8, 2020

• General: Previously, the error/success message for the Mail Server Settings was not shown in IE browser. This issue has now been fixed.
• General: User-based licensing has now been introduced in all ITOM products.
• General: Previously, the bcp.exe file execution test failed when the installation folder had a white space character in it. This issue has now been fixed.
• General: Previously, the widget tooltip message was not getting closed even after navigating to other pages. This issue has now been fixed.
• OpManager: Previously, there was an out of memory error due to load in availability monitoring after 124156 release. This issue has been fixed now.

Build No 125116 - April 2, 2020

• General: Previously, there was an issue in APM plugin startup when the backend MSSQL database was authenticated using Windows credentials. This has been fixed now.
• OpManager: There was an XSS vulnerability present during creation of new workflows. This has been fixed now.
• OpManager: There were issues with data collection in Process Monitors, when Poll using DNS name was selected. These have been fixed now.

Build No 125114 - March 26, 2020

• General: jQUERY has been migrated to version 3.4.1 to avoid vulnerabilities.
• OpManager: For downtime schedulers, there was a mismatch between the date in the list and the actual date that was set during configuration. This issue has now been fixed.
• OpManager: Previously,the threshold and rearm values for packet loss and response time monitors did not allow ‘0’ in QCW. This issue has now been fixed.
• OpManager: For devices in the ‘Not Monitored’ state, Unmanage option will now be shown by default instead of Manage option.
• OpManager: Previously, the netmask was never retained when the discovery profile was edited. This issue has now been fixed.

Build No 125113 - March 23, 2020

• OpManager : Hyper-V polling mechanism has been changed for better performance.
• OpManager : VMware tags will be updated in Custom Fields for all VMware-based devices (applicable only for vCenter-based discovery).
• OpManager : Previously, when the monitor name included a backslash (\), there was an issue when the user tried to edit the Performance Monitor from Threshold Severity column. This has been fixed now.
• OpManager : Special characters (except underscore) have been restricted when trying to name Custom SNMP monitors.
• OpManager : Previously, there was an issue when adding Service monitors from Firefox, where it did not get displayed as soon as it was added. This has been fixed now.
• OpManager : There was an issue in adding a performance monitor from drop down in Internet Explorer. This has been fixed now.
• OpManager : Issues related to Internet Explorer such as graph overlap in Service Monitors, Displacement of Outage History icon, Graph icon misalignment in Monitors page and Graph display issue in Availability timeline graph have been resolved.
• OpManager : Previously Update Inventory operation for VMware was not allowed for BV admin users. The same has been allowed now.
• OpManager : Table View icon was previously hidden under Device Snapshot → Monitors → Performance Monitors → Graphs page. This has been fixed now, and the icon is displayed.
• OpManager : The user is notified 10 days prior to the Apple Push Notification Service (APNS) certificate expiry.

Build No 125112 - March 17, 2020

• OpManager : The user interface for Notification Profiles has been revamped.
• OpManager : Now, ITIL as well as ITIL Admin roles can be used to configure ServiceNow.
• OpManager : Previously, the user interface crashed when large number of items were listed from ServiceNow while creating a notification profile. This issue has been fixed by loading the items dynamically.

Build No 125111 - March 13, 2020

• General: Previously, in the SystemPerformance dashboard, there was an issue with the loading of the Disk Space Monitor widget. This has now been fixed.
• General: Previously, the ‘Forgot Password’ option did not work when the authentication details were removed from the Mail Server Settings. This issue has now been fixed.
• General: Now, users can utilise LDAPS during AD authentication to establish secure communication with domain controllers.
• OpManager: Previously, in the Notification Profile, there were issues with the save and update option when more trap monitors or devices were selected. This has now been fixed.
• OpManager: A proper warning will now be shown while editing a profile that has recurring/delay scheduled to it.
• OpManager: Previously, AM/PM was displayed even in 24 hours time format. This has now been removed.
• OpManager: Problematic devices redirection link has been given for the Infrastructure snapshot widget.
• OpManager: Previously, the timezone IDs were displayed incorrectly across the product. This has now been fixed by providing an option to customize the timezone for specific regions/countries.
• OpManager: When searching for an IP using global search, devices which had the same IP address assigned previously were also displayed in the results. This issue has now been fixed.
• OpManager: An option to enable/disable Terminal has now been provided in the System Settings page.
• OpManager: Previously, the default device credentials were used to connect the terminal in the device snapshot page. Now, the user will have to enter the necessary credential in order to connect to the SSH/Telnet terminal.

Build No 125110 - March 10, 2020

• OpManager: Support has been added for new storage device - Infinibox.
• OpManager: Previously, there were issues in adding the generated report as a widget. This has now been fixed.
• OpManager: Issues with the alarm being deleted from the Central server has now been fixed.

Build No 125108 - March 4, 2020

• General: The obsolete code causing Remote Code Execution vulnerability in Mail Server Settings v1 APIs have been removed.

Build No 125102 - March 3, 2020

• OpManager: Previously, when devices were added in the Add-on modules (such as NFA, NCM,etc) they were automatically added as UnManaged in OpManager. This issue has been fixed now.
• OpManager: In Google Maps, you can now choose between Satellite, Terrain and Hybrid views in addition to the default RoadMap view.
• OpManager: In Zoho Maps, the equivalent ground distance can now be displayed either in kilometers or miles.
• OpManager: When the Custom Fields of a device is updated and they match the criteria of a Device Group, the device will automatically get added to the respective group.
• OpManager: Interfaces that do not collect data for a long time will now be unmanaged and moved to Idle Interfaces.
• OpManager: Time period selection has now been included in the Embed Interface graphs page.
• OpManager: Previously, in some cases, the device templates associated in Central were not reflected in Probe. This issue has now been fixed.
• OpManager: Around 50 new Device Templates and 80 new SNMP based performance monitors have been added.
• OpManager: Previously, credentials were not associated to devices when rediscovered from the Device Snapshot page. This issue has now been fixed.

Build No 125101 - February 25, 2020

• OpManager: Negative values can now be provided as thresholds in Performance Monitors.
• OpManager: When a monitor’s name contained backslash (\), the graph page of the monitor was not accessible. This has been fixed.
• OpManager: Now, users can also take snapshots of a VM using the new ‘Take Snapshot’ function under Virtual Machine tasks, either from Workflows or from the Device Snapshot page of the VM (applicable to VMware VMs only).
• OpManager: Now, show/hide dial option for the Custom Dials has also been provided in the Device Snapshot page.
• OpManager: OpManager can now fetch the value for the ‘Serial number’ custom field using WMI.

Build No 125100 - February 20, 2020

• General: You can now export thread dumps as text files.
• OpManager: Minor enhancements have been done in Virtualization polling for improved performance.

Build No 125012 - June 18, 2021

• OpManager: Previously, there was an out of memory error due to load in availability monitoring after 124156 release. This issue has been fixed now.
• General: Previously, there was a thread lock issue that sometimes caused the product to not function as intended. This issue has now been fixed.

Build No 125011 - June 9, 2021

• General: DB Analyzer process has been enhanced.

Build No 125010 - April 19, 2021

• General: The product upgrade process has been enhanced.

Build No 125009 - March 17, 2021

• General: There was a permission issue while fetching SQL server’s available disk space during PPM upgrade. This issue has now been fixed.

Build No 125008 - October 27, 2020

• General: Upgrade process has now been fine tuned.

Build No 125007 - August 27, 2020

• General: DB Analyzer performance has been improved and the analysis time during PPM upgrade has been optimized.
• General: There was a permission issue with Linux OS when initializing database during PPM upgrade. This issue has now been fixed.

Build No 125006 - July 10, 2020

• Enterprise Edition: When the Probe name consisted of a non-ASCII character, the communication between the Central and the Probe failed. This issue has now been fixed.

Build No 125005 - June 22, 2020

• General: PostgreSQL has now been updated to version 10.12.
• General: The PostgreSQL vulnerability issues from version 10.10 have now been fixed.
• General: Directory Traversal validation was being bypassed when using <cachestart>. This issue has now been fixed. (Reported by Yazhi Wang of Trend Micro and zerodayinitiative)
• General: Garbled characters (non English languages) appeared in the Web client due to the introduction of encoding in JVM. This issue has now been fixed.

Build No 125004 - May 29, 2020

• General: Due to a file encoding issue in few languages, garbled characters were displayed in the product at some instances. This has now been fixed.
• General: Previously, there were issues with applying PPM over a backup restored build. This has now been fixed.
• General: Path Traversal vulnerability in URLs starting with <cachestart> has now been fixed. (Refer CVE-2020-12116)

Build No 125003 - April 15, 2020

• Firewall: PostgreSQL Connection close issue has been fixed.

Build No 125002 - April 2, 2020

• General : Previously, there was an issue in APM plugin startup when the backend MSSQL database was authenticated using Windows credentials. This has been fixed now.

Build No 125001 - March 16, 2020

• General: Failure of PostgreSQL archive data migration due to stale entries has now been fixed.

Build No 125000 - February 19, 2020

• General: PostgreSQL has now been migrated to version 10.10.
• General: The PostgreSQL vulnerability issues from version 9.2.4 have now been fixed.
• Enterprise Edition: Previously, there were issues with starting the primary probe after a failover. This has now been fixed.

Build No 124196 - April 29, 2020

• General: Path Traversal vulnerability in URLs starting with <cachestart> has now been fixed (Refer CVE-2020-12116).

Build No 124191 - February 26, 2020

• General: Previously, upgrade failed due to an issue in database entry. This issue has now been fixed.

Build No 124190 - February 11, 2020

• OpManager: The device deletion of VMware and Nutanix from the inventory has been optimized.
• OpManager Storage Monitoring: Some IBM storage devices were getting deleted automatically in certain cases. This issue has been fixed now.

Build No 124189 - February 6, 2020

• OpManager: Support for new storage device: v5/v6 arrays in Huawei OceanStor

• OpManager: Monitor availability and flapping for BGP links

• OpManager: Previously, there were issues in saving the reports generated for Interfaces. This has now been fixed.

• OpManager: Device down report has been newly added under Inventory report type.

• OpManager: The following reports have been added under Performance report type - Devices with Performance Monitors, Devices with File Monitors, Devices with Folder Monitors, Devices with Process Monitors, Devices with AD Monitors, Devices with Exchange Monitors, Devices with MSSQL Monitors, Devices with ADService Monitors, Devices with MSSQL Service Monitors, Devices with Exchange Service Monitors, Devices with NT Service Monitors, Devices with URL Service Monitors and Devices with Service Monitors.

• Enterprise Edition: False alarm generation in central has been fixed by disabling the active PDs.

• Enterprise Edition: When the license expired for OpManager Essential to Enterprise migrated probes, it was automatically switched to free version. This issue has now been fixed.

Build No 124183 - February 3, 2020

• General: Option to switch between full view and tab view in device snapshot settings page has been removed.
• General: Left and center screen alignment views has been removed from global settings.
• OpManager: Previously, StringData tables were not cleared when cleanup of old data was performed. This has been fixed, and now StringData will also be cleared based on provided Database Maintenance settings.

Build No 124182 - January 30, 2020

• OpManager: To improve usability, Custom Field update using CSV file import has been enhanced. You can now map the user defined headers in the CSV file with the default Custom Fields of OpManager.
• OpManager: In the email notification for Interface Bandwidth Alarms, there were issues in fetching the Interface IPAddress Custom Fields. This issue has now been fixed.
• OpManager: In the device snapshot page for Router device, the Router graphs were plotted incorrectly. This issue has now been fixed.
• OpManager: Previously, some devices and interfaces were duplicated during discovery. This issue has now been fixed.
• OpManager: The HTTP requests for ‘getInterfaceUtilization’ API’s have been changed from POST to GET.
• OpManager: Utilization alerts will now be raised even when one among the two (Rx/Tx) values violates the threshold.
• OpManager: The dependent device name will now be available along with the interface name in all Interface audit reports.
• OpManager: Previously, there were issues in the status alarm of UPS devices. This has now been fixed.
• OpManager: There were issues in data collection for specific models of Printer device as it returned special characters in the OID response. This has now been fixed.
• OpManager: The option to configure VRF Name and Poll Interval has been added in the IP SLA Configuration page.
• OpManager: Source Interface IP Address can be viewed in IP SLA Monitor Snapshot Summary page.
• OpManager: Previously, VoIP Monitor Total Statistics Data was displayed incorrectly. This issue has now been fixed.
• OpManager: Previously, Devices were not properly listed in NetFlow Analyzer Add IP SLA page. This has now been fixed.
• OpManager: You can now choose the Time Frame for the Availability Pie Chart under IP SLA Monitor Snapshot page in Expanded Mode.
• OpManager: Previously, when the graph monitors page was refreshed, the graphs displayed were smaller in size. This issue has been fixed.
• General: In the snapshot page, when switching between tabs, the widgets displayed were overlapping. This issue has been fixed.

Build No 124181 - January 28, 2020

• OpManager : The Apps tab has now been moved to the Snapshot page for better visibility.

• OpManager : Previously, the virtual network discovery in the Discovery wizard had issues when no VMs were found under a host. This has now been fixed.

• OpManager : Previously, there were issues with the vCenter discovery when a different port number was used. This has now been fixed.

• OpManager : Previously, alerts were being raised with the wrong entity name even after changing it in the environment. This issue has now been fixed.

• OpManager : The VMSprawl dashboard was not populated properly in certain scenarios. This issue has now been addressed.

• OpManager : A Top band has been introduced in the Snapshot page for vCenter and ESX for better visibility of data.

• OpManager : The vCenter details widget in the vCenter snapshot page has been revamped for better usability.

• OpManager : Issues with the data displayed in the Forecast reports have now been fixed.

• OpManager : During migration from Essential to Enterprise,the SQL server transaction log file limit was exhausted when 1100000 rows or more were inserted in a table. This issue has now been fixed.

• OpManager : Previously, the users were able to read the Arbitrary file. This file read vulnerability has now been fixed. (Reported by [email protected]) (Refer: CVE-2020-11527 )

Build No 124178 - January 20, 2020

• OpManager: In Notification Profiles, there was an issue in sending alarm notifications when the UPS monitor(s) went down. This has been fixed now.

Build No 124176 - January 13, 2020

• General: The Workflow page has been revamped to offer better user experience.
• OpManager Storage Monitoring: Support for new storage device - Synology DSM has been added.
• OpManager Storage Monitoring: Duplicate templates for storage devices have now been removed.
• OpManager: Credential-associated report that lists devices with the credentials associated has been added under Inventory reports.
• OpManager: There was an issue in exporting data to XLS format in getXLData API. This issue has now been fixed.

Build No 124175 - January 9, 2020

• OpManager : In the Devices tab under Inventory, you can now choose to display multiple Custom field values along with existing device details.

• OpManager : For Interface, Severity can be customized based on Admin and Operational Status.

• OpManager : During Layer 2 Discovery Schedule, when new devices are added, their respective Layer 2 Map was not loading properly. This issue has now been fixed.

• OpManager : An option has been provided to Import/Export Business Views between Central and Probe.

• OpManager : In the Business View Summary Widget, an option to filter Business View data has been added.

• OpManager : Export to PDF and Export to Excel options have now been included in the Embed Interface Graphs page.

Build No 124169 - January 3, 2020

• A new default dashboard ‘Realtime dashboard’ has been introduced, which displays the real-time status of monitors and interfaces of your devices through three new widgets - Monitors summary, Interfaces summary and Realtime alerts.

Build No 124168 - December 31, 2019

• General : Alarms page has been completely revamped for better user experience.
• General : ServiceDesk Plus and ServiceNow integrations have been added to PII search.
• General : Previously, auto-login was not working when the special character ‘&’ was present in the username or password. This issue has now been fixed.
• General : The JCE compatibility issue that occurred during PPM migration has now been fixed.
• General : Previously, the ‘Export to PDF’ option was not working for customers who had upgraded from version 12.200 to the latest build. This issue has now been fixed.
• General : Under Mail Server Settings, the length of the ‘User Name’ field has now been increased from 50 to 100 characters.
• General : Under User Management, the maximum length of the ‘Password’ field has now been increased from 25 to 100 characters.
• OpManager : Support for new storage devices: Lenovo v3700, v7000.
• OpManager : Issue Fix: Device discovery, status polling and other minor issues have now been fixed for the storage devices Netapp Ontap, Fujitsu, Hitachi, FC Switch, HP Eva, EMC Unity, IBM Storwize
• OpManager : TLS Support: TLS 1.2 support for EMC Symmetrix VMAX storage device
• OpManager : Previously, there were issues with creating a new v2 trap processor from unsolicited trap when the spectype was set to null. This has now been fixed.
• OpManager : In dynamic tables, the indexes were not created for the event tables. This issue has now been fixed.
• OpManager : The SQL injection vulnerability issue in getTopDevicesByEvents API has now been fixed.
• OpManager : Previously, Daily Downtime Schedules were not rescheduled properly due to daylight saving. This issue has now been fixed.
• OpManager : Previously, Device Snapshot page was loading partially when redirected from the devices in Layer2 Maps page. This issue has now been fixed.
• OpManager : Previously, incorrect data was displayed in All Interface Availability Report when Filter by option was chosen as a group. This issue has now been fixed.
• OpManager : Previously, the Syslog rules were not being saved if the facility name was in any other language apart from English. This issue has now been fixed.
• OpManager : Previously, under Device Snapshot page, the Availability Reason was not updating for certain conditions. This issue has now been fixed.
• OpManager : Default CLI monitors were not added for a few IBM AIX servers during CLI-based discovery. This issue has been fixed.
• OpManager : ‘Test Credential’ action was failing for devices running Windows 2000. This has been fixed.
• OpManager : When a process monitor was deleted from OpManager, the corresponding Alarms were not deleted. This issue has been fixed.
• OpManager : In the NOC View, when embed links were used, Maps were not displayed properly, this has now been fixed.
• OpManager : In the Device Availability Dashboard reports, download was not possible when you set a filter value and click Export to Excel. This has now been fixed.
• OpManager : In the Inventory, when large number of devices were deleted, the process was slow. This has now been optimized.
• OpManager : When Poll Using IP Address is selected, unresolved DNS name will now be updated with the resolved DNS name during Rediscovery and Scheduled Discovery.
• OpManager : Previously, an error message was displayed when an embedded widget was opened in Internet Explorer. This issue has now been fixed.
• OpManager : For ‘At-a-glance’ report, the graphs were not displayed properly for other languages apart from English. This issue has now been fixed.
• OpManager : When thresholds were configured, it was not possible to save the folder monitor in other languages apart from English. This issue has now been fixed.
• OpManager : Previously, restricted operator users were able to delete monitors in the snapshot page. This issue has now been fixed.
• OpManager : In scheduled reports, the snapshot graphs were not displayed for ‘At-a-glance’ report. This issue has now been fixed.
• OpManager : Previously, performance issues were encountered while monitoring SNMP v3 devices. This has now been optimized.
• OpManager : Integration page has been changed to icon view from tab model.
• OpManager : ServiceDesk Plus’s request attributes in Notification Profile, Log a ticket option has been cached for enhanced performance. Updated attributes can be retrieved using refresh option from the same UI.
• OpManager : An option has been added to create Downtime Schedule for Groups and Devices from the Inventory page.
• OpManager : You can now associate devices to the existing Downtime Schedules from the Devices page under Inventory.
• OpManager : When a device is added/removed from a Group, the changes will automatically be updated in the associated Downtime Schedule.
• OpManager : Previously, it was possible to configure Downtime Schedule for interface groups via API. This issue has been fixed.
• OpManager : Now you can associate Devices / Interfaces to existing groups directly from the Inventory.
• OpManager : Now you can create new groups by selecting devices directly from the Inventory.
• OpManager : Device addition failed when the display name contained unsupported characters. This issue has now been fixed.
• OpManager : When performing rediscovery from the device snapshot page, the device was classified under ‘Unknown’ category if the credentials failed. This issue has now been fixed.
• OpManager : In builds running other languages apart from English, selecting a map in the Business view widget displayed devices that were not related to the map. This issue has now been fixed.
• OpManager : When the uplink dependency of a device in a business view was down, the Copy As option for the Business View did not work properly. This issue has now been fixed.
• OpManager : The OpManager Support page has been completely revamped to provide better user experience.
• OpManager : In Notification mails/tickets, the file separator (/) was not displayed in alarm messages. This issue has now been fixed.
• OpManager : Notification action was triggered for unselected device polls during scheduled recurring and delay actions. This has now been fixed.
• OpManager : In DataCollection Error Logs report, there were issues with exporting the report in XLS and PDF format. This issue has been fixed.
• OpManager : The global and device specific Notification Profile can now be renamed while editing them.
• OpManager : There was an issue with saving the device-specific Notification Profile due to internal naming. This has now been fixed.
• OpManager : Previously there were issues with deleting and associating credentials that had special characters in its name. This has now been fixed.
• OpManager : Previously, the duplication of SNMPv3 engine IDs resulted in data collection failure for Monitors and Interfaces. This issue has now been fixed.
• OpManager : Issues with the failure of SNMPv3 Discovery due to identical engine ID configuration has now been fixed.
• Enterprise Edition : An user-interface has been provided to migrate OpManager from ‘Professional’ edition to ‘Enterprise’ edition.
• Enterprise Edition : During Professional to Enterprise migration, truststore will be automatically downloaded from OpManager Central.
• Enterprise Edition : The time taken for the migration process from Professional edition to Enterprise edition has been greatly reduced.
• Enterprise Edition : Existing issues that affected the migration process have now been fixed.
• Enterprise Edition : Previously, there was an OOM (Out of memory) issue during Probe startup. This has now been fixed.
• Enterprise Edition : If any changes are identified in the Probe’s connection status with the Central, a mail will be sent from the Central by default.

**Build no 124102 - December 11, 2019 **

• OpManager: Previously, there was an issue with virtual network discovery in the Discovery wizard, when no virtual machines were found under a host. This issue has been fixed.

Build no 124101 - November 18, 2019

• General: The JCE compatibility issue that occurred during PPM migration has now been fixed.
• General: Previously, the ‘Export to PDF’ option was not working for customers who had upgraded from version 12.200 to the latest build. This issue has now been fixed.

Build no 124100 - November 5, 2019

• OpManager: Previously, product upgrade was terminated due to incomplete population of ‘ReportDetails_VMSprawl.xml’ file. This issue has been fixed.
• OpManager: Previously there were issues with deleting and associating credentials that had special characters in its name. This has now been fixed.

Build no 124099 - October 30, 2019

• OpManager: During Scheduled Discovery, the devices added to the Ignore List were rediscovered along with their interfaces. This issue has been fixed.
• OpManager: While rediscovering existing devices, the rediscovery rule was not properly applied for devices that were down. This issue has now been fixed.
• OpManager: Previously, Add Device fails when the device’s Syslocation length was more than 200. This issue has now been fixed.
• OpManager: Previously, Add Device fails when the device’s Syscontact length was more than 100. This issue has now been fixed.
• OpManager: Previously, there was a variation in the ping response for the linux devices that were intermittently reachable. This issue has now been fixed.
• OpManager: Previously, Custom Field values with non-english characters were not updated in OpManager. This has now been fixed.
• OpManager: Previously, the listDowntimeSchedule api was not accessible externally. This issue has now been fixed.
• OpManager: Previously, in the Dashboard HeatMap widget, the status of the ‘Not-Monitored’ devices was displayed as Clear. This has been fixed now.
• OpManager: The option to update Display Name of devices in Bulk has been added. This can be done using CSV file import or set Hostname/FQDN/SysName as your device’s Display Name.
• OpManager: “Filter by Groups” feature is added to the All Groups Widget under Dashboard. With this, you can now choose to filter the displayed groups.
• OpManager: In OpManager, Operator users now have the privilege to access Groups in Read-Only format.
• OpManager: Subgroups are now listed under ‘Devices in Group’ and ‘Interfaces in Group’ widgets.
• OpManager: Previously, the Report builder had issues with displaying data when multiple tables were being queried by the interface. This issue has been fixed.
• OpManager: Interface data collection failure due to DNS name mismatch has now been fixed.
• OpManager: Previously, the stale entries present in the deletedInterface table were getting duplicated during Rediscovery. This issue has now been fixed.
• OpManager: New Report : All Alerts with Notes added.
• OpManager: Previously, there were issues in loading MIB files when the file name contains special character ( . ). This has now been fixed.
• OpManager: Weaker file permission for Nipper file has been fixed (CVE-2019-17421 - bug found by: Guy Levin (@va_start)).
• Enterprise Edition: The files extracted during installation will be removed if the probe is not compatible with Central or if the installation is cancelled.
• Enterprise Edition: The probe download link in Central will redirect to archives. In Japanese setup, you will be redirected to product support for further assistance.

Build no 124098 - October 23, 2019

• OpManager : OpManager now provides support for Nutanix HCI monitoring. Also, a separate report category for Nutanix and a separate dashboard with Nutanix-related widgets have been added.
• OpManager : Previously, there were SQL injection vulnerabilities in the ‘deviceName’ parameter of 'deleteUrl’, ‘addUrl’ and 'getURLSummary’. These have been fixed now.
• OpManager : When there were a large number of vCenters / ESX parent servers present in OpManager, VMware events were not raised properly. This issue has been fixed now.
• OpManager : In the ‘Performance monitors’ tab under Device Snapshot, when the value for the threshold was normal, it was displayed as ‘Not Enabled’ in all languages except English. This has been fixed now.
• OpManager : In the Alarms page, edit thresholds option was not working properly for Datastore-related alerts. This has been fixed now.
• OpManager : URL templates have now been moved from ‘Configuration’ tab in Settings to ‘Monitoring’ tab.
• OpManager : Discovery Rule Engine has now been moved from ‘Configuration’ tab in Settings to ‘Discovery’ tab.

Build no 124097 - October 18, 2019

• General : OpManager now supports domains secured with NTLMv2 protocol for Windows authentication in MSSQL databases.
• General : There was an issue in the area-graph widgets, resulting in the text in the graph not being displayed completely. This has been fixed now.
• OpManager : ‘View report’ option has been provided in the Notification profile list page to view the logs for the notifications triggered from a particular profile.

Build no 124096 - October 16, 2019

• OpManager: A new feature, ‘Business Hour Rule’ has been introduced under Reports. This helps the user to filter reports based on the specified Business hours.
• OpManager: Previously, an OutofMemory exception message was thrown while Scheduling Reports. This issue has now been fixed.
• OpManager: Previously, there was an issue with the XLS Export option when multiple instances was present in the reports. This has now been fixed.
• OpManager: Previously, there was an issue with the exported Report displaying MO name instead of Business View Displayname. This has now been fixed.
• OpManager: Previously, Default My Favorite Reports were not listed in Probe. This issue has now been fixed.
• OpManager: Previously, there were issues with exporting Reports when Fully Qualified Domain Name had ‘.’ at the end. This has now been fixed.
• OpManager: Issues with the Business View filter in the Service Monitor Report has now been fixed.
• OpManager: Previously, there was an issue with few columns being displayed as strings while exporting reports in XLS format. This has now been fixed.
• OpManager: Previously, the Graph Reports displayed data only from a single instance, even when data from multiple instances were available. This issue has now been fixed.
• OpManager: Issues with the URLs by Response Time Report has now been fixed.
• OpManager: Issues with Interface Link in Alarm Snapshot page has now been fixed.
• OpManager: Previously, there was an issue while exporting data from Central Snapshot page. This has now been fixed.
• OpManager: A new option ‘Click here for Preview’ has been added to the Reports page.
• OpManager: Reports are now sorted in the descending order based on time.
• OpManager: The ‘Back’ option in the Schedule Report page has now been hidden for some reports.
• OpManager: In the Alarms page, the limit on the number of alarms that can be exported has now been removed.
• OpManager: The Report builder page has been completely revamped to provide better user experience.
• OpManager: When any special characters are present in the custom Dashboard name, there were issues with the ‘Set as default Dashboard’ option. This has now been fixed.
• OpManager: The ‘CPU’ and ‘Memory Utilization’ graphs in system performance dashboard were not updated properly. This issue has now been fixed.
• Enterprise Edition: If the probe version does not match with the Central version, an error message will be displayed with a link to download the appropriate version. This has been implemented in the probe registration panel (during installation)
• Enterprise Edition: If the Probe is unavailable, the Central start up page will now have the link to download the appropriate version of the Probe.
• Enterprise Edition: The Probe details page in the Central Server will now have the link to download the appropriate version of the Probe.
• Enterprise Edition: When installing probe in Linux machines, the proxy details usage were not displayed. This issue has now been fixed.
• Enterprise Edition: Previously, probe registration failed when the probe name has whitespace character. This has been restricted and a warning message will now be displayed.
• Enterprise Edition: If the Central is installed with PostgreSQL database and the probe is installed with MSSQL database, installation will be blocked and a warning message will be displayed.
• Enterprise Edition: An option to export data from the diagnostics table has now been introduced in the Diagnostics page.
• Enterprise Edition: Previously, there was communication failure between the Probe and Central when a non-English character was present in the Probe name. This issue has now been fixed.
• Enterprise Edition: Previously, the SmartUpgrade was failed when the installation folder name had space in it. This issue has now been fixed.
• Enterprise Edition: Previously, there were issues with the Probe not starting automatically after an upgrade. This issue has now been fixed.

Build no 124095 - October 11, 2019

• OpManager: Apps menu has been added in the product top band next to the Settings Icon, to enable easy access to third party integrations in OpManager.
• OpManager: Now, change in severity for any alarm in OpManager will be updated under the Notes section of that request/incident in ServiceDesk Plus/ServiceNow.
• OpManager: A new feature called ‘request call back’ is available for integration with ServiceDesk Plus versions greater than 9413. With this feature, if an alarm is marked as resolved in SDP, it will be automatically cleared in OpManager too.
• OpManager: A new command called 'Log a ticket (ServiceNow)' has been added under External Actions in OpManager workflows, which allows the user to create tickets in ServiceNow.

Build no 124089 - October 3, 2019

• Previously, the RAM and Hard disk details of any device had to be updated manually if it was upgraded/modified. This issue has now been fixed, and these details are updated automatically once in every 12 hours.
• Now, users can select whether to poll their devices based on IP address or DNS name. This setting can be controlled throughout OpManager (from Settings > Monitoring), or can also be configured for individual devices.
• The device discovery pages for VMware, Hyper-V and XenServer have been combined under 'Virtualization discovery’, and its usability has also been improved.
• Previously, it was possible to make Authenticated/Unauthenticated SQL injections in OPMDeviceDetailsServlet. This has been fixed now. (Refer CVE-2019-17602)
• In some cases, there was an alarm status mismatch between OpManager and Applications Manager’s connector module. This issue has been fixed now.
• Previously, if too many dials were configured for a device, the device snapshot page of that device had a very high loading time. This has been fixed now.

Build no 124087 - September 26, 2019

• OpManager: In a few cases, data collection for CLI monitors stopped abruptly. This issue has now been fixed.
• OpManager: In Central, interface templates can now be configured and associated to probes and the related interfaces.
• OpManager: Over 60 new interface templates have been added.
• OpManager: In the Devices Availability Dashboard Report, previously the device list was not fetched based on the availability graph chosen. This has now been fixed.
• OpManager: Availability data has now been added in All Groups widget under the Dashboard.
• OpManager: XSS vulnerability in Remote Desktop is now been fixed.

Build no 124086 - September 24, 2019

• OpManager: The Workflow page has been completely revamped to provide better user experience.
• OpManager: Previously, the Device Name was not displayed in the Alarm suppression Audit Report. This issue has now been fixed.
• OpManager: New Reports have been added for Alarm Suppressed Devices, Top Trap Count by Source, Top EventLog Count by Source and Top SysLog Count by Source.
• OpManager: Under Inventory Reports, exporting individual reports in Device by Device Types & Device by Category had an error. This issue has now been fixed.
• OpManager: While using the Filter option under Health and Performance Reports, data has not been displayed for an hour’s interval for the previous day, when custom time is selected. This issue has now been fixed.
• OpManager: On creating a new report in Inventory Snapshot page, time period for the report was always displayed as Last 12 hours. This issue has now been fixed.
• OpManager Storage Monitoring: Custom fields have been provided for Storage Devices.
• OpManager Storage Monitoring: Existing OpManager customers are now eligible for a Free 30 days trial for Storage Monitoring Add-ons.
• OpManager Storage Monitoring: OpManager now supports monitoring the following storage devices - Huawei 9000 series, Huawei 18800 series,Fusion Block,Fujitsu DX series.
• OpManager Storage Monitoring: There was an issue with selecting the storage devices in the pop-up window when exceeding the storage license limit. This has now been fixed.

Build no 124085 - September 18, 2019

• General: Issues with the ‘Keep me signed in’ functionality for AD Authenticated users has now been fixed.
• General: Previously, there was an issue with the silent patch not getting applied for directory names with space. This has now been fixed.
• General: Previously, the License expiration message was displayed in the header even after the successful registration of the product. This issue has now been fixed.
• General: For registered users, the CustomerID and LicenseID will now be shown in Product Details page.
• General: Previously, there was an issue with uploading specific mp3 sound files in the Web Alarm profile. This issue has now been fixed.
• General: Issues with PGSQL to MSSQL migration when there were duplicate values in datetime column has now been fixed.
• General: For Windows AD authentication, Passthrough login is now supported even if SMBv1 protocol is disabled in Domain Controller.
• General: Previously, Passthrough settings configuration had to be entered manually. Now the details can be auto-configured using the ‘Fetch’ option.
• General: ‘Save and Test’ option has been introduced for Passthrough configuration to validate the settings.
• OpManager: Previously, there was an issue in saving the ‘Severity’ and ‘Rearm Severity’ of Syslog rules in other languages apart from English. This issue has now been fixed.
• OpManager: In Notification profiles, there was an issue with the sort option for Profile name. This has now been fixed.
• OpManager: Previously, there was an issue with creating new URL Templates. This has now been fixed.
• OpManager: Previously, there was an issue with the automatic shutdown of enterprise setup even after the expiry of evaluation/extended license. This issue has now been fixed.

Build no 124082 - September 11, 2019

• OpManager: Previously, there was an issue with the working of addBulkMonitors API in other languages apart from English. This issue has now been fixed.
• OpManager: XSS vulnerability in Performance monitors under the Monitors Tab in Device snapshot page has now been fixed.

Build no 124081 - September 9, 2019

• OpManager : Using report builder, you can now fetch device availability, response time and packet loss data.
• OpManager : A new dashboard widget has been added to display the list of interfaces that are down.
• OpManager : You can now filter devices based on groups and business view in the ‘Infrastructure Snapshot’ widget.
• OpManager : During scheduled network discovery, deleted interfaces were rediscovered. This issue has now been fixed.
• OpManager : There was a downtime data mismatch issue between device availability report and downtime report in terms of seconds. This issue has been fixed.
• OpManager : In the downtime scheduler page, the ‘Next scheduled at’ will be displayed as '-' when the current schedule is running for the schedule type 'Once’.
• OpManager : Over 300 new Device Templates and default performance monitors have now been added.
• OpManager : Support is provided for AES-192 and AES-256 encryption methods in SNMPv3 credential.
• OpManager : SNMPv3 support for APC UPS devices is provided.
• OpManager : SNMPv3 support for ESXi servers is provided.
• OpManager : When exporting the availability dashboard report as a PDF, there were issues with sorting for the custom time period filter. This issue has now been fixed.
• OpManager : In Interface snapshot page, the ‘Disable Admin status’ option was not displayed if the product language was set to Chinese. This issue has now been fixed.
• OpManager : Users can now export the list of devices and interfaces in CSV and XLS format.
• OpManager : Under System Settings, Group chat option has been hided.
• OpManager : When adding devices in Business View, device type icons will be displayed instead of the default icons.
• OpManager : Previously, the Map Widget was vulnerable to Cross-Site Scripting(XSS). This issue has now been fixed.

Build no 124078 - November 21, 2019

• OpManager : Previously there were issues with deleting and associating credentials that had special characters in its name. This has now been fixed.
• OpManager : Previously, it was possible to make Authenticated/Unauthenticated SQL injections in OPMDeviceDetailsServlet. This has been fixed now. (Refer: CVE-2019-15106)
• OpManager : Issues with the getAssociatedMonitors API has now been fixed.

Build no 124075 - September 3, 2019

• The issues with hardware report filter has now been fixed.
• Issues regarding the empty status for ESX processor sensor has now been fixed.
• Previously, it was not possible to disable hardware monitors in ‘Checkpoint’ firewall device.This issue has now been fixed.
• Previously, the hardware tab for router/switch/firewall with NFA/NCM was missing. This has been included now.
• Previously, Device model name was being displayed in the ‘Hardware Information’ report instead of the Display name. This issue has now been fixed.
• The product was slow when the alarms were cleared or deleted. This issue has been fixed.
• The ‘Device status’ was not displayed while navigating through pages under Sensor Info. This issue has now been fixed.
• Previously, data was not displayed for hardware monitoring graph. This issue has now been fixed.
• In the ‘Add Performance Monitor’ page, the XSS vulnerability that has been affecting the Add VendorName option under Bulk SNMP has now been fixed.
• Remote desktop authorization issue has been fixed.
• The ‘Performance Monitors’ list has now been optimized to load faster.
• Issues with the threshold configurations inconsistency for String performance monitors has now been fixed.
• In case of EventLog poll failure due to RPC server unavailability, the successive poll will now fetch the data of the previous failed poll along with the current poll data.
• For PGSQL database, the ‘URL Response Time’ graph displays no data if the selected time period is more than 7 days. This issue has now been fixed.
• Data was not displayed for URLs by Response Time under Availability and Response reports. This issue has now been fixed.
• Previously, when there were a large number of widgets in the dashboard, few widgets had an issue with displaying data. This issue has now been fixed.
• Previously, it was unable to configure the threshold for the script monitor in the device snapshot page when the != operator is selected. This issue has been fixed.
• Index ID of instances were displayed instead of Display name for certain multiple instances of performance monitors even after configuring Display OID. This issue has now been fixed.

Build no 124074 - August 30, 2019

• Enterprise Edition: An audit entry will now be made in the Central for probe addition, updation or deletion.
• OpManager Storage Monitoring : In Storage Monitoring, spare disks will not be considered under License Count
• OpManager Storage Monitoring : OpManager now supports monitoring of the following storage devices - Hitachi VSP, Hitachi AMS, Huawei (API Support), NetApp ONTAP 9
• OpManager : Under Network Tab, Printers category has been introduced with enhanced Icon View.
• OpManager : Errors in editing URL Monitors have now been fixed.

Build no 124071 - August 23, 2019

• OpManager Storage Monitoring : HP 3PAR Devices with TLS 1.2 certification can now be added to storage devices and Data collection issues for HP 3PAR devices with older TLS certifications have now been fixed
• OpManager Storage Monitoring : Issues with EMC Clariion and EMC UNITY have now been fixed
• OpManager Storage Monitoring : New options have been introduced: Addition and Deletion of monitors for storage devices
• OpManager : Push Notifications are not received due to expiry of APNS certificates in iOS mobile application. This issue has now been fixed.
• OpManager : Errors have now been fixed in SNMP Trap Processors: Addition of Match Criteria and Rearm Criteria
• OpManager : Errors have now been fixed in SNMP Trap Processors: Deletion of final entries of Match Criteria and Rearm Criteria

Build no 124070 - August 22, 2019

• OpManager: There was a user login bypass vulnerability in APM plugin for OpManager. This issue has now been fixed. (Refer CVE-2019-15106)

Build no 124069 - August 14, 2019

• General: If the SMPP server responds with empty SystemID, SMS via SMPP server will not work. This issue has now been fixed.
• General: Database reconnection timeout was wrongly configured in the upgraded setup. This issue has now been fixed.
• General: Basic Settings has been renamed to General Settings.
• General: Privacy settings has been reordered under General Settings tab
• General: Add-On/Product Integration has been renamed to Third Party Integrations
• General: Groups option has been reordered under Configuration tab
• OpManager: SMS sent by recurring notification profile, was not routed via actual SMS Gateway. This issue has now been fixed.

Build no 124067 - August 9, 2019

• OpManager: In the Groups tab under Inventory, the availability status for individual groups will be displayed.
• OpManager: The ‘Associate Device Template’ page under ‘Device Template’ has been optimized to load faster
• OpManager: Option to remove devices from ‘Business Views’ list page has been introduced.
• OpManager: Option to delete multiple Business Views, Rack Views and 3D Floor Views has been introduced.
• OpManager: Under Inventory, a product assistance notification message to enable a Displayed Module IP management(OpUtils) in OpManager’s system settings has been added.
• OpManager: The mail ID validation issue has now been fixed.

Build no 124066 - August 7, 2019

• OpManager: In interface reports, the ‘Min’ values were displayed as ‘0’ due to type casting. This issue has now been fixed.
• OpManager: There was a difference in the color code for legend between interface traffic widget and interface graph. This issue has now been fixed.
• OpManager: In interface graphs, when the value of ‘InOctets’ were very high, there was no data displayed in the graph. This issue has now been fixed.
• OpManager: The Layer 2 map discovery issue due to partial SNMP OID response has now been fixed.
• OpManager: Around 14000 new vendor templates have been added to avert devices from being classified as 'Unknown’.
• OpManager: In the devices availability dashboard report, incorrect data was displayed when filters were applied. This issue has now been fixed.
• OpManager: The IP address was displayed as undefined in the heatmap widget tooltip under NOC view. This issue has been fixed.
• OpManager: Previously, it was not possible for a user to delete multiple URL monitors. This issue has been fixed now.
• OpManager: Previously, it was not possible to install standby service if the product build number was above 12.4.056. This issue has been fixed.

Build no 124065 - August 5, 2019

• OpManager: Hyper-V server’s disk related monitors displayed mismatched data. This issue has been fixed.
• OpManager: The Hyper-V VMs under type 2 hypervisor host did not display any data for disk related monitors. This issue has been fixed.
• OpManager: During Hyper-V host discovery, Hyper-V VMs were not discovered since their DNS was not reachable. This issue has now been fixed.

Build no 124058 - July 31, 2019

• OpManager: The devices in the local network will be automatically added and monitored when OpManager is installed.
• OpManager: In Layer 2 maps, you can now drag and drop nodes.
• OpManager: In the Layer 2 maps page, the zoom in and out option has been enhanced and a new ‘Fit to screen’ option has been added.
• OpManager: After generating a report from the interface snapshot page, there was an issue with exporting the PDF in other languages apart from English. This issue has now been fixed.

Build no 124056 - July 26, 2019

• General : A new option has been introduced in the Rebranding page under settings where a custom message can be configured to be displayed in the login page.
• General : The changes made in the system settings page were not updated when the default domain was deleted in the AD authentication page. This issue has now been fixed.
• OpManager : In the ‘Test credentials’ page under Discovery, the test credential status was displayed as ‘Passed’ even if the SNMPv3 credentials were incorrect. This has now been fixed.
• OpManager : Dumping data to SQL database using bcp Utility failed when the path to the OpManager installation directory contained whitespace character(s). This issue has now been fixed.

Build no 124054 - July 23, 2019

• OpManager: Forecasting reports based on machine learning has been added for memory, disk and CPU utilization monitors.
• OpManager: In a VMotion environment, VMware ESXi host discovery failed in a few cases. This issue has now been fixed.
• OpManager: Data collection failure issue for VMware ESXi host Hardware has now been fixed.
• OpManager: A new performance monitor ‘CPU Utilization per core’ has been added for Hyper-V VM servers.
• OpManager: A new performance monitor ‘Datastore free space in percentage’ has been added for VMware related datastores.
• OpManager: The virtual NICs’ data related to Hyper-V virtual machines was not displayed under virtual details. This issue has now been fixed.
• OpManager: Network monitor data related to Hyper-V VM’s were not collected. This issue has now been fixed.
• OpManager: During vCenter discovery, the VM OS type will be displayed even when the specific VM’s credentials were not passed (only for Windows devices).
• OpManager: When the vCenter inventory is updated, it will be audited in the device level and reports.
• OpManager: Data was not displayed properly for Cisco MDS fibre channel switch due to an UI issue. This has now been fixed.
• OpManager: There was an issue in accessing the terminal from the device snapshot page. This issue has now been fixed.

Build no 124053 - July 18, 2019

• OpManager: In the new reports page, support for custom field reports has been added for interfaces.
• OpManager: In a few cases, associating performance monitors to a device/devices failed due to a database error. This issue has been fixed now.
• OpManager: Under inventory, ‘Add as widget’ icon has been included for interface reports.
• OpManager: ‘Table view’ tab has been included for interface reports generated from the inventory.
• OpManager: When the interface name contained forward slash character (/), the name was not displayed properly in the Business view link label. This issue has been fixed.

Build no 124051 - July 11, 2019

• OpManager Enterprise Edition: Due to event flooding, event processing was terminated in Central. This issue has been fixed.
• OpManager: Under Inventory, when editing the interface speed from the interfaces tab, it was not possible to update the speed up to 1Tbps. This issue has been fixed.

Build no 124043 - July 2, 2019

• General: You can now edit, re-arrange and hide the default tabs in the horizontal menu. New custom tabs can also be added, edited, rearranged and deleted from the horizontal menu.
• OpManager: When the user is logged in as a Business view admin user, there were alignment issues in the admin tab and the product details were not displayed. This issue has now been fixed.

Build no 124042 - June 26, 2019

• OpManager Enterprise Edition: Under Settings → Configurations, a new ‘Central details’ page has been added to update Central server’s host name, protocol and port details. Manual entry in the ‘NOCServerDetails’ file and ‘CommunicationInfo’ XML file is not required and its dependency has been removed.
• OpManager: Previously, creating trap processor from unsolicited traps failed. This issue has now been fixed.
• OpManager: Due to a timeout issue in workflow, the status of the workflow task was displayed incorrectly. This has now been fixed.
• OpManager: When two or more workflows scheduled at the same time had a similar file or folder task, the output filename/ foldername was displayed incorrectly. This issue has now been fixed.
• OpManager: When alarm notes were updated, the value of the previous severity was updated to -1. This issue has now been fixed.
• OpManager: ${message} variable is now supported in workflow for executing Windows script and Linux script tasks.
• OpManager: When adding traps from 'Load from MIBs’, the trap description was not added. This issue has now been fixed.
• OpManager: Previously, if storage device details were updated from the device snapshot page, the changes were not reflected. This has now been fixed.
• OpManager: There was an issue with the multiple delete option for traps. This has now been fixed.
• OpManager: For storage devices, storage dial data was not displayed in the device snapshot page. This issue has now been fixed.
• OpManager: In API access reports, the sorting issue in the column 'Process time (ms)' has now been fixed.
• OpManager: For certain interface based reports, the device group was listed. This issue has now been fixed.
• OpManager: In groups, when a ‘Custom field’ of numeric type is selected in criteria, the group could not be created. This issue has been fixed.
• OpManager: Bulk delete option is now supported for groups.

Build no 124041 - June 21, 2019

• OpManager: IPv6 network discovery issue has now been fixed.

Build no 124040 - June 20, 2019

• OpManager: In Reports, under the devices availability dashboard there was a graph loading issue for other languages. This issue has now been fixed.
• OpManager: In Zoho maps, the tool-tip with the option to delete a device was not displayed when the device was clicked on the map. This issue has now been fixed.
• OpManager : Under Interfaces in the device snapshot page, the option to sort Rx and Tx traffic based on units has been enhanced.
• OpManager: In the device availability dashboard report, there were issues with the ‘Exclude days’ option. This has now been fixed.
• OpManager: When drilling down on specifics under the monitors tab from the device snapshot page, users were redirected to the edit threshold page instead of the graph view page for application monitors. This issue has now been fixed.

Build no 124039 - June 17, 2019

• OpManager: The HTML injection vulnerability issue in Google maps has now been fixed. (CVE-2017-11560)
• OpManager: Now, when you select a storage device model in the ‘Add storage device’ screen, the supported models and prerequisites for that device model will be displayed.
• OpManager: Unwanted Protocol names which are being displayed in graphs and reports for storage devices are removed.
• OpManager: Now supports storage monitoring for the following device series in NetApp: E2600, E2700, E2800, E5400, E5500, E5600, EF540, EF550, EF560.
• OpManager: In trap processors, there were issues with the bulk delete option. This has now been fixed.
• OpManager: For trap processors, ‘greater than’ and ‘lesser than’ support has been added in the match criteria condition.
• OpManager: In graphs, it was not possible to view the data for last 24 hours as the ‘STATSDATA’ table was not renamed in PGSQL essential to enterprise migration. This issue has been fixed.
• OpManager: In mobile application, notification messages were still sent to a deleted user account. This issue has been fixed.
• OpManager Enterprise Edition: The status of Central will be displayed in the header band of all probes connected to it. The number of probes up or down will now be displayed in the header band of the central.
• OpManager Enterprise Edition: In Professional to Enterprise migration, a warning message displayed for installing a new probe. This has now been fixed.
• OpManager Enterprise Edition: When SSL is enabled in Central and a proxy is used, the probe registration failed. This issue has now been fixed.
• OpManager Enterprise Edition: If the probe is updated manually when there is no communication between Central and probe, the probe start up failed when the communication was established after upgrade. This issue has been fixed.
• OpManager Enterprise Edition: When the probe and Central is migrated from pgSQL to MSSQL when there is no communication between Central and probe, probe start up failed when communication was re-established. This issue has now been fixed
• OpManager Enterprise Edition: Upgrading the probe to a higher version than Central caused the probe to shutdown automatically. This issue has now been fixed.
• OpManager Enterprise Edition: When the probe is deleted from Central, all related probe communication alerts will also be deleted.
• OpManager Enterprise Edition: During installation/migration of Essential(Professional) edition to Enterprise edition, a warning message will be displayed if an existing probe is added.
• OpManager Enterprise Edition: The ‘Servername’ and ‘Serverport’ of the last deleted probe was displayed for a newly installed probe. This issue has now been fixed.
• OpManager Enterprise Edition: When the Central was not reachable, there was a delay in logging into probe as the IPSLA monitor count had to be fetched from Central. This issue has now been fixed.
• OpManager Enterprise Edition: In Central, the device discovered time was not displayed in the inventory. This issue has now been fixed.
• OpManager Enterprise Edition: In probe, there was a delay when fetching ‘licenseDetails’ from Central. This has now been fixed.
• OpManager Enterprise Edition: The probe name is now specified in the home page of Probe.
• OpManager Enterprise Edition: In the case of Central failure, archived files were moved to an unprocessed directory. This issue has now been fixed.
• OpManager Enterprise Edition: When connectivity to the Central server was disrupted, trying to associate any monitors to a device in a Probe would be unsuccessful. This issue has been resolved now.

**Build No 124037 - June 7, 2019 **

• OpManager: Over 18 new device models and default performance monitors have now been added in OpManager.
• OpManager: When the dynamic IP address option is enabled in Windows, the localhost status was displayed as down. This issue has been fixed.
• OpManager: For the Spanish version of Windows operating system, the ICMP ping method was not successful. This issue has been fixed.
• OpManager: In Layer2 discovery, devices not in the specified IP range were being discovered. This issue has now been fixed.
• OpManager: In Map settings under system settings, admin users can now customize the color codes that indicates link traffic in Business views.
• OpManager: Color coding was not shown in availability dashboard report while exporting as PDF.This issue has been fixed.
• OpManager: Interface status was not cleared when all the threshold values are given.This issue has been fixed.

**Build No 124033 - June 22, 2019 **

• General: HTML Injection vulnerability issue in Google maps has now been fixed.(CVE-2017-11560)

**Build No 124030 - June 3, 2019 **

• OpManager: SQL injection and other vulnerability issues in application monitors/servers, UCS monitoring, database maintenance, archiving & performance monitors, file/folder monitoring, URL/script templates have been fixed.
• OpManager: Data collection in URL monitors failed due to few URLs that required cookies to be accepted in browser. This issue has now been fixed.
• OpManager: Hyper-V servers can now be discovered automatically by configuring the ‘schedule discovery’ option. It updates the Hyper-V server inventory automatically once in every two hours.
• OpManager: Due to the page loading issue in performance monitors page, the data displayed was overlapped when navigating to another page in the monitoring tab. This issue has now been fixed.
• OpManager: Incorrect ‘Windows service down’ alerts were raised during device downtime. This issue has now been fixed.
• OpManager: In URL monitors, no data was displayed for ‘Last n hours response time’ monitor. This issue has now been fixed.
• OpManager: In health and performance reports, the sorting for ’Volumes with most free space’ report was incorrect. This issue has been fixed.
• OpManager: For health and performance reports, language localization option was missing. This has been fixed now.
• OpManager: When generating a new report for performance monitors from category under monitors, there was a mismatch of data between the header and data. This issue has been fixed.
• OpManager: When a Windows service monitor with a display name similar to another Windows service monitor is added, false alerts were raised even when the service name is different. This issue has now been fixed.
• OpManager: When a monitor associated with a device is removed from the windows service monitors page, the related alerts were not deleted. This issue has now been fixed.
• OpManager: If a Windows device contains special characters, workflow involving the ‘NT Service’ and ‘NT Service Polling’ were not executed for the device. This issue has now been fixed.
• OpManager: In Windows service monitors page, issues related to sorting and searching with display name have been fixed.
• OpManager: In file monitors, there were issues with the configured ‘consecutive times’ parameter for 'FileExists’. This has now been fixed.

**Build No 124027 - May 24, 2019 **

• OpManager: Integration with Slack is now supported in OpManager.

**Build No 124026 - May 23, 2019 **

• General: The SQL injection vulnerability in ‘Reports’ page has been fixed.

Build No 124025 - May 20, 2019

• General: The SQL injection vulnerability in ‘SubmitQuery’ page has been fixed.

Build No 124024 - May 16, 2019

• General: Previously, when HTTPS was enabled in the WebClient, some unexpected loading issues were observed. This has now been resolved by upgrading the Tomcat version used in the product.
• General: Scroll issue while listing custom dashboards has been fixed now.
• General: The ‘local privilege escalation’ vulnerability has now been fixed.
• OpManager: Shift key support has been added for device associations.
• OpManager: Issue when resizing the Device summary widget in dashboard has been fixed.
• OpManager: Redirection issue in Business view, created using flash has been fixed.
• OpManager: Encryption for Trap Profile’s community and SNMPv3 credentials has been improved with a stronger encryption algorithm for enhanced security.
• OpManager: Previously, it was not possible to edit and save scheduled reports created from the device snapshot page. This issue has now been fixed.

Build No 124023 - May 10, 2019

• OpManager Storage Monitoring: OpManager now supports monitoring of the following storage devices - HPE Nimble, Pure Storage, Dell Compellent SC4020, SC5020, SC7020, SC8000, SC9000, SCv3000, SCv3020.

Build No 124022 - May 8, 2019

• General: Apache’s ‘commons-fileupload’ jar has been updated to version 1.3.3 due to ‘Remote Code Execution’ vulnerability through manipulation of the ‘DiskFileItem’ in an older version.

Build No 124016 - May 2, 2019

• NetFlow : There was an issue in HighPerf Reporting Engine, where raw table split occurred frequently when more routers were added. This issue has been fixed.
• NetFlow : The issue where Security Settings was not visible in the Central Server, has been fixed.
• NetFlow : New flow export templates have been added to the Export Flow database.

Build No 124015 - April 30, 2019

• OpManager: You can now configure notifications for alarms from VMware datastores by associating these datastores to Global Notification Profiles.
• OpManager: An option to verify the Service Up/Down Status while adding Service Monitor has been provided now.
• OpManager: SQLInjection and other Vulnerability Issues for Edit Threshold, Delete Performance Monitor & Adding Script Template action has been fixed now.
• OpManager: Negative Values were recorded for the monitors like Committed Bytes and Registry Quota for some of the servers and desktops. This has been fixed now.
• OpManager: OpManager Standard Edition has been launched for SMEs with basic network and server monitoring requirements.
• OpManager: The OpManager Essential Edition is now renamed as the OpManager Professional Edition.

Build No 124014 - April 26, 2019

• OpManager: From the Central device template page, option has been added to associate device templates directly to devices.
• OpManager: You can now configure alerts for the ‘bandwidth has exceeded its configured speed’ criteria from 'Notification Profiles’.
• OpManager: Duplicate performance monitors have now been removed from the list of performance monitors.
• OpManager: When a large number of VLANs are monitored, the data-collection process was slow. This has now been optimized.
• OpManager: In 'Add Device’, if serial number is enabled in custom fields, it will automatically be displayed in the device’s snapshot page.
• OpManager: In the device snapshot page, the availability graph displayed incorrect time values. This issue has been fixed.
• OpManager: In availability reports, the reports displayed data only for a few days when the ‘last month’ filter was selected. This issue has been fixed.
• OpManager: In discovery profile, when a considerably large IP range was configured, an ‘OutOfMemoryException’ was thrown. This issue has been fixed.
• OpManager: The IP address was set as the display name even when the DNS name was resolved. This issue has been fixed.
• OpManager: Status update is restricted for an active downtime schedule. A warning message will now be displayed.
• OpManager: In the Inventory, ‘sort by’ option has now been provided for heat map and icon view.
• OpManager: Previously, rediscovered interfaces were not updated in the interface list and had to be refreshed. This issue has been fixed.
• OpManager: In the device interface list, the option to bulk delete interfaces has now been enhanced.
• NetFlow: Total Volume consumption details have been added in Schedule Consolidated Report.

Build No 124013 - April 23, 2019

• OpUtils: Previously under Network Monitor tool, the Read community was being queried while adding or importing devices. It has now been replaced by an option in which users could select the credential from the credential list.
• OpUtils: Path Traversal vulnerability in getSPMSettings API has been fixed.
• OpUtils : Previously on adding or scanning DHCP server, the scan failed due to missing AD domain username and password. Now those details are obtained from the user while adding.
• OpUtils : Previously under IP usage summary report, the used IP addresses were not displayed when “All” category was chosen. The issue is fixed now.
• OpUtils : Previously, the MIB browser tool did not display the assigned credential names having whitespaces for selected IP addresses. This issue is fixed now.
• OpUtils : Under Scheduler of SPM, the switches in ‘selected switches column’ present in edit task option were not sorted. The issue is fixed now.

Build No 124012 - April 17, 2019

• OpManager: Basic monitors and template for Nutanix device monitoring using SNMP has now been added.
• OpManager: Monitors that provide the mounted partition details for a device has been added.
• OpManager: Previously, VMware rediscovery for host based monitoring failed due to similar moRef ID for different VMs. This issue has now been fixed.
• OpManager: In the performance monitors page under settings and device snapshot page, auditing for add/edit/delete operations of monitors has now been added.
• OpManager: In the performance monitors page under settings, SQL injection vulnerability and other vulnerability issues have now been fixed.
• OpManager: In at-a-glance report for virtual devices, empty graphs with no data were displayed for few servers. This has now been fixed.
• OpManager: In a few rare cases, there was no communication between OpManager and APM plugin in the mobile application. This issue has now been fixed.

Build No 124011 - April 11, 2019

• General: Users can now enable or disable ‘Chat support’ option under settings.
• General: ‘Chat support’ for Chinese language has been added.
• General: In Reports, access to ‘API Access’ page under ‘Audit’ has been restricted for Operator type users.

Build No 124000 - April 09, 2019

• JRE has been migrated to 1.8 and various vulnerabilities from JRE 1.7 have been eliminated. Highlights of JRE 1.8 migration:
  • OpManager: 2048 bit key length algorithm is supported for URL monitoring.
  • General: Cipher algorithms AES-192 and AES-256 are supported in addition to AES-128 algorithm.
  • General: TLSv1.2 protocol is now supported by default.

OpManager v12.3****Build No 123329 - May 23, 2019

• OpManager: Storage report name was displayed as ‘undefined’ instead of 'Storage summary’. This issue has been fixed now.

Build No 123327 - April 03, 2019

• OpManager: There was a delay in alarm notifications being pushed due to a thread lock issue with the application. This issue has now been fixed.
• OpManager: On product start-up, there was a hike in CPU metrics. This has now been handled.
• NetFlow: XSS vulnerability in the Attacks settings page has been fixed now.
• NetFlow: Dashboard graph issue has been fixed.
• NetFlow: Custom time selection option has been added for multiple-device compare report.
• NetFlow: Previously, FlowRate in forensics was calculated for Bytes/sec. It can now be calculated for bits/sec.
• NetFlow: Geo Location has been updated with the latest details.
• NetFlow: The issue with scheduling Compare Reports for custom time period has now been fixed.
• NetFlow: 0.0.0.0 invalid IP address validation has been added to Applications Names creation.
• NetFlow: NetFlow database has been updated with the latest Application names.
• NetFlow: Each API request’s parameter type and value in settings module is now verified before processing it, to avoid any vulnerabilities.
• NetFlow: NFA now supports user defined data units.
• NetFlow: Binary / Decimal notation for data units has been introduced in NFA.
• NCM: NCM now supports regular expression login prompt, enable prompt and configlet prompt (only for SSH protocol).
• NCM: Earlier, taking backups of multiple devices, with some of them being unmanaged devices, resulted in an error message. Now, NCM takes backup of the managed devices, ignoring the unmanaged devices.
• NCM: There was an issue with the EOL/EOS data updation while discovering new devices into NCM. This issue has been fixed.
• NCM: Earlier, the NCM server CPU usage went up to 100%, in a few cases, while executing a scheduled backup. This issue has been fixed.
• NCM: Earlier, there was a delay while updating device credentials. This issue has been fixed.
• NCM: Earlier, there was an issue while trying to view Security Audit and Configuration Analysis report. This issue has been fixed.
• NCM: The backup failure issue while using the SNMP-TFTP protocol has been fixed.
• NCM: There was an issue with the detailed view of Compliance Reports in Custom Reports. It has been fixed.

Build No 123326 - March 29, 2019

• OpManager: In the device snapshot page, the custom dial color is now displayed based on the threshold severity level. The default color will be displayed if no threshold is configured.
• OpManager: In the add trap processor page, the version was displayed incorrectly. This issue has now been fixed.
• OpManager: In the interface configuration page, there were issues with the ‘Select all’ option in the ‘Manage’ and ‘Status poll’ columns. This issue has been fixed.
• OpManager: In the interface rediscovery page, the interface status was represented with brown color instead of green color when interface rediscovery was performed more than once. This issue has been fixed.
• OpManager: When an interface’s counter type is changed from 32-bit to 64-bit or vice versa, it can be updated during interface rediscovery.
• OpManager: In Enterprise edition, when the probe was running as a service with central in HTTPS mode, there were issues with smart upgrade option in builds after the 123181 release. This has now been fixed.
• OpManager: The alarms raised were not cleared automatically due to a thread lock issue. This has now been fixed.
• OpManager: In Reports, a few parameter requests were passed as a query string. This has now been converted to form-data.
• OpManager: XSS vulnerability affecting report name and description has now been fixed.
• OpManager: XSS vulnerability in notes column has now been fixed.
• OpManager: In availability reports, there were issues with exporting the report in XLS format. This issue has been fixed.
• OpManager: When scheduling reports, if the '-' symbol is used in the schedule name, an empty page was displayed. This issue has now been fixed.
• OpManager: Previously, the delete older files task deleted all the files in the folder. This issue has now been fixed.
• OpManager: Previously, the move older files task moved all the files in the folder. This issue has been fixed.
• OpManager: Previously, the compress older files task compressed all the files in the folder. This issue has now been fixed.
• OpManager: The XSS vulnerability in workflow name has now been fixed.
• OpManager: The XSS vulnerability in destination host column under Forward traps has now been fixed.
• OpManager Storage Monitoring: There were some issues with discovery of HP 3Par devices. It has been fixed now.
• OpManager Storage Monitoring: In rare cases, there were issues in downloading PDF files (from Graphs section). It has been resolved now.
• NetFlow: Upgrade Issue on 123294 has been fixed.

**
Build No 123325 - March 27, 2019**

• OpManager: New chart types (line, bar, area, scattered) have been added for interface graph widgets.
• OpManager: In map widget, the zoom option was not available unless the widget was edited. This has now been fixed.
• OpManager: When an ongoing downtime schedule is edited, an alert message will be displayed with an option to end the schedule process.
• OpManager: Option has now been provided to delete an active downtime schedule.
• OpManager: Over 1000 new device models and default performance monitors have now been added in OpManager.
• OpManager: Previously, while editing a Downtime Schedule assigned to Business Views, there was a mismatch between the previously selected business view and the one displayed (although the latter is not affected). This issue has now been fixed.

Build No 123323 - March 21, 2019

• OpManager: Earlier OpManager Central server had issues with stopping the service. This has been fixed now.
• General: In AD authentication, you can now configure scope to be auto-assigned to users logging-in for the first time, when auto-login is enabled.

Build No 123322 - March 18, 2019

• OpManager: The new grouping feature enables the user to classify a set of devices or interfaces or both, as a single functioning node. The following functions can be performed on groups: Checking for availability of group members, configuring alarms for a group, applying bulk monitoring thresholds to a group, generating group reports, monitoring group widgets ,applying filters to groups, and more.

Build No 123320 - March 12, 2019

• General: Windows AD based authentication is now supported on Linux installations.
• General: Due to Google Play Store restrictions, support for SMS notifications through AppSMS has been revoked.
• OpManager: In web alarm notification profile, the option to upload sound files has now been added.
• OpManager: In web alarm notification profile, option has been added to associate all the administrators and operators.
• OpManager: During product startup, deadlocks occurred in a few rare cases.This issue has now been fixed.
• OpManager: In the login page, a ‘400 bad request’ occurred when the ‘Keep me signed in’ option was enabled. This issue has now been fixed.

Build No 123314 - March 8, 2019

• OpManager: In Device Snapshot page of hardware supported devices, ‘Operating System’ was wrongly displayed as 'OS Version’. This has now been corrected.
• OpManager: “Page not found” was displayed when the URL contained ‘/’ character at the end. This error has been fixed.
• OpManager: Disk utilization values for high capacity hard disks were displayed incorrectly when fetched through SNMP. This has been fixed now.
• OpManager: It was not possible to set rearm value as zero for File/Folder monitors. This has been addressed.
• OpManager: When multiple instances of Hyper-V VM was running, CPU utilization was displayed incorrectly. This has been fixed.
• OpManager: When creating custom SNMP monitors, ‘Save Absolutes’ option has been added for Integer type OIDs.
• OpManager: Username and password fields are now optional for setting up proxy in the install shield wizard. However, the password field cannot be blank if a username is specified.

Build No 123313 - March 5, 2019

• OpManager: The real time graph for interfaces displayed values exceeding the configured speed. This issue has now been fixed.
• OpManager: Previously, when an interface name contained special characters, the specific interface was not saved during rediscovery.This issue has now been fixed.
• OpManager: The downtime schedule process was triggered automatically even after the schedule was completed. This has now been fixed.
• OpManager: In some cases, device availability and the device status was displayed incorrectly. This issue has now been fixed.
• OpManager: The page loading time for Discovery reports was slow when there were a large number of entries. This issue has been fixed.
• OpManager: For a few devices, the category was displayed as ‘Unknown’ for a device template associated with a custom category. This issue has been fixed now.
• OpManager: In device templates, the OIDs with SysDescription criteria were not working properly. This issue has been fixed.
• OpManager: Operator users can now view the at-a-glance report and bandwidth report.
• OpManager: The interface archiving failure issue has now been fixed.

Build No 123312 - February 28, 2019

• NetFlow : The option to log SDP/ SDP-MSP tickets has now been added for LinkDown alerts.
• NCM: Discovery reports have been added newly to allow users to see the discovery progress live.
• NCM: A new option has been provided in discovery reports for adding devices which were not reachable during the discovery process.
• NCM: Users can now choose the devices they wish to add to Inventory, from the list of discovered devices, instead of adding all the discovered devices automatically.
• NCM: How To and FAQ’s are provided for all the major settings pages, Devices Tab in Inventory and Device Snapshot page.
• NCM: New Messaging Framework has been implemented for NCM. Users can now see the appropriate messages on all the important pages to help them use NCM better.
• NCM: The discovery tab has been simplified to make device discovery process easier.

**Build No 123311 - February 26, 2019 **

• OpManager: In the Alarm page, link has been provided to view interface Snapshot page.
• OpManager: Previously, the option to export a report in XLS format was not available when there were more than 32000 rows. This issue has now been fixed.
• OpManager: The option to export a report in XLS format was not available when specific styles were applied to the rows. This issue has now been fixed.
• OpManager: In the data collection log report, the agent dropdown box was not displayed. This issue has now been fixed.
• OpManager: In reports, when the specific time window condition was applied, data was not displayed. This issue has now been fixed.
• OpManager: Previously, when an availability report was scheduled, a report was created but the mail with the attached report was not sent. This issue has now been fixed.
• OpManager: Previously, while editing the SNMP trap processors, removing the contents of the message box resulted in a missing field. This issue has been resolved.
• OpManager: There were issues in data collection and alarm notifications for NetApp storage devices when added as a generic device from ‘Add device’ menu. This has been resolved now.
• OpManager: For at-a-glance report, the option to export the report as XLS was not working. This issue has now been fixed.
• OpManager: Integrated reports have been hidden from the edit and schedule report option.
• OpManager: The help-desk widgets and dashboards have been removed from the product.
• OpManager Storage Monitoring: There were issues with data collection in IBM v7000 storage devices. This has been fixed now.
• OpManager Storage Monitoring: Storage device support has been added for the following devices: IBM Storwize V5000, V3500, V3700.
• OpManager Storage Monitoring: Previously, there were issues in discovery and data collection in EMC VMAX. This has been fixed now.

Build No 123308 - February 19, 2019

• NetFlow : HighPerf installation error in the Japan language server has been fixed.
• NetFlow : Users can now configure tax or additional fees in Billing.
• NetFlow : Notification messages for product assistance have been included to help users. They can be enabled or disabled under general settings.

Build No 123307 - February 15, 2019

• General: User Notifications (notifications listed under bell icon) will now be grouped and will have options to be hidden.
• OpManager: Previously, there was an issue in loading the probe’s dashboard from Central. This issue has now been fixed.
• OpManager: During probe installation in linux systems, there was an issue with proxy configuration. This issue has now been fixed.
• OpManager: Associating devices of more than one category/business view is now supported while adding or updating notification profiles.
• OpManager: Devices will now be listed based on category/business view while using the Quick Configuration Wizard (QCW) to associate notification profiles.
• OpManager: In Notification Profile, an option is now provided to select between 1/3/5 polls to trigger alerts based on the 'Device misses poll(s)' criteria.
• OpManager: In ‘Notification Profiles Triggered’ report, there was an issue in the displayed tabular information when it was exported in PDF format. This issue has been fixed.

Build No 123306 - February 13, 2019

• NCM: Previously, there was an inaccuracy in percentage values in the compliance snapshot piechart. This issue has been fixed by removing the percentage marker.
• NCM: Now, Nipper Report filenames include the device hostname or IP address.

Build No 123305 - February 12, 2019

• OpManager: In 'Network discovery’, there were issues with the ‘ignore’ filter in custom category. This has now been fixed.
• OpManager: In ‘Device templates’ under Configuration, clicking on a device template number displayed the devices list instead of the respective devices in that device template. This issue has now been fixed.
• OpManager: In interface graphs, it was not possible to modify and set a custom time period. This issue has now been fixed.
• OpManager: In Device Categories, all device categories are now displayed along with the custom categories.
• OpManager: In Maps, it was possible to export the map to excel and download it even if there are no devices present in the map. This issue has been fixed.
• OpManager: In the Device List view under Inventory, when sorting devices by 'Device Name’, the devices with names starting with an upper case were displayed at the top. This issue has been fixed.
• OpManager: In probe setup, during rediscovery the device name was not displayed properly for non-SNMP devices. This issue has been fixed.
• OpManager: Previously, it was not possible to add the devices that could not be reached through ICMP in CSV discovery. This has now been implemented.
• OpManager: The device status for devices that cannot be pinged was not properly updated in the Central server. This issue has now been fixed.
• OpManager: The display name for SNMP enabled devices was different from the name provided in the CSV file. This issue has been fixed.
• OpManager: The Layer2 map discovery failed when multiple incorrect SNMPv3 credentials were selected. This issue has now been fixed.
• OpManager: There was a data collection failure when ‘engineID’ was changed in the device. This has now been fixed.
• OpManager: There was an issue in data collection for SNMP string monitors with ‘StringToNumeric’ expression, when the response was a float value. This issue has now been fixed.
• OpManager: There were issues with auto dependency classification for imported Layer 2 devices. This issue has been fixed.
• OpManager: When scheduled rediscovery was executed, the device template applied manually kept rolling back to the default template. This issue has now been fixed.
• OpManager: For devices added from the OpManager’s add-ons, the encoding details were not defined in the device snapshot page. This issue has been fixed.
• OpManager: In the snapshot page, it was not possible to edit device details for domain controllers. This issue has been fixed.
• OpManager: In Layer 2 maps, while importing devices, it was not possible to select and discover a single device. This issue has now been fixed.
• OpManager: In NOC view, garbled characters were displayed in the widget’s display name. This issue has now been fixed.

Build No 123304 - February 8, 2019

• General: Previously, validation of session failed when the URL contained two or more consecutive backslashes. This vulnerability has been fixed now.

Build No 123303 - February 7, 2019

• OpManager: Performance monitors now also support float values along with integer and string values.

Build No 123295 - February 4, 2019

• General : For Windows firewall, TCP port unblock rules added for Tomcat webserver port.
• General: An error message will show details regarding the number of remaining login attempts or the lockout duration, when there is an invalid login attempt based on the configured password policy.
• General: ‘Mail Server Settings’ and ‘Notification Profile’ will now support mail addresses with special characters and gateway (IP) addresses.
• General: In Linux installation, the issue affecting the free space validation has now been fixed.
• OpManager: An option is now provided to ‘Enable/Disable’ notification profiles.
• OpManager: Previously, notification profiles sent ‘Alarm Cleared’ alerts for all the selected monitors that rearmed, despite configured severities in the profiles. This issue has been fixed.
• OpManager: In 'Notification Profile’, users were notified of cleared alarms for UPS monitors when the only criteria selected was “When any UPS monitor is down” and not "Notify when the alarm is cleared". This issue has been fixed.
• OpManager: Notification profiles triggered down alerts after the configured delay even when the alarms were cleared. This issue has been fixed.
• OpManager: Notification messages for product assistance have been included to help users. They can be enabled or disabled under settings.

Build No 123293 - January 28, 2019

• OpManager: In 'Alarms’, there was an issue in sorting alarms based on criteria. This issue has been fixed.

Build No 123292 - January 25, 2019

• OpUtils: Hint messages that helps in knowing intricate details of the product has been shown in various pages now.
• OpUtils: Global Search enabled for IPAM & SPM.
• OpUtils: Previously, Sorting of columns in Bandwidth Monitor was not working properly as expected. This has been fixed now.

Build No 123291 - January 24, 2019

• OpManager: Service Now Integration has now been introduced in OpManager.
• OpManager: Support for monitoring Microsoft Windows 2019 & Microsoft HyperV 2019 servers has now been added.
• OpManager: The option to add a custom SNMP monitor has been improved and simplified. Users can now add multiple node type of monitor for devices from within the UI.
• OpManager: In device templates, there were issues with adding custom SNMP monitors from the central server. This has now been fixed.
• OpManager: In the performance monitors page under settings, a new filtered view has been added for custom monitors and default monitors.
• OpManager: When adding or editing string monitors, the threshold field validation was missing. This has now been handled.
• OpManager: When a monitor was edited and saved, the changes made in ‘Consecutive time’ and ‘Save Absolute value’ were not reflected. This has now been fixed.
• OpManager: In application monitors under settings, big integer values were restricted for thresholds. This has now been removed.
• OpManager: Security issues in VMware/HyperV/Xen specific APIs have now been fixed.
• OpManager: The PPM upgrade issue due to missing entries related to hardware from previous upgrades has now been fixed.
• OpManager: There were issues with the time filter option when editing any monitor apart from performance monitors. This has now been fixed.
• OpManager: File monitors could not be added when special character like ‘/’ was used in the search string for match option. This has now been fixed.
• OpManager: Event logs raised with description messages having accent characters in the Russian language were not displayed properly in OpManager. This has been fixed now.
• OpManager: When adding or editing the performance monitor under settings, if incorrect threshold values were configured, the error message was displayed incorrectly in the Japanese language. This has been fixed now.
• OpManager: When loading a specific graph page from the device snapshot page, the page was not loaded properly. This has now been fixed.
• OpManager: From the VM list widget inside vCenter/ESX/HyperV/XenServer snapshot pages, the ‘Start monitoring’ option to start/stop VM monitoring as virtual server was not working when accessed from other pages apart from the first. This has now been fixed.
• OpManager: In inventory, the alignment issue inside the exported XLS sheet for process monitors has now been fixed.
• OpManager: Under monitors tab in the device snapshot page, the maximum number of configured monitors for a certain type will now be listed first.
• OpManager: In the VMware discovery page, when the drop-down box to increase the display count of VMs was clicked, the previously selected VMs were unselected. This issue has been fixed.

Build No 123290 - January 22, 2019

• OpManager : The archiving failure issue in OpManager Central has now been fixed.

Build No 123289 - January 18, 2019

• OpManager : When clicking on a device in an embedded business view widget, the device page did not display any information and was blank. This issue has been fixed.
• OpManager : In Maps, after navigating to a device snapshot page from business view, it was not possible to go back to the business view page by clicking on the ‘back’ button. This issue has been fixed.
• OpManager : If a device filter was applied to the ‘Devices’ list in the inventory page, it was also reflected in the ‘Business View’ device list. This issue has been fixed.
• OpManager : When clicking on an existing business view a blank page was displayed in the Map view. This issue has now been fixed.
• OpManager : In Business view, there were issues with uploading a new background image. This has now been fixed.

Build No 123288 - January 17, 2019

• NetFlow: Introduced an option to view raw data storage information.
• NetFlow: Introduced multiple combinations of IP address for “From” and “To” in Between Sites IP Grouping bulk load.
• NetFlow: The bulk load feature in IP group and application mapping has been enhanced with options to download and upload sample .xml files.
• NetFlow: This issue with wrong Maximum value displayed in the Compare Report Graph Table has been fixed.
• NetFlow: The issue with schedule deletion, update and audit in Schedule Report has been fixed.
• NCM : Now you can transfer files from NCM server to devices using Configlets via SCP client

Build No 123287 - January 14, 2019

• General: There was an OOM (out of memory) issue due to the unused ports that collect data in OpManager. This issue has been fixed.
• General: In the login-page, the ‘Keep me signed in’ check box was selected after every login even when it was unchecked. This issue has now been fixed.
• General: In the device snapshot page, the ‘Terminal’ icon is now hidden for the operator user.
• OpManager: The XSS vulnerability in ‘Notification Profile name’ has now been fixed.
• OpManager: In Notification profile, ‘Cc’ field has been included for email notifications in addition to the ‘To’ and ‘From’ address fields.
• OpManager: RADIUS authentication protocol is now supported in OpManager mobile application.

Build No 123281 - January 10, 2019

• Firewall: Cisco FirePOWER - Firewall policy, rule analysis, and compliance report support using CLI to fetch configurations.
• Firewall: To prevent vulnerabilities, Firewall Analyzer now verifies each request parameters type and value before it is processed.
• Firewall: Support-ID: 4882018 - In Japanese installation, if ‘Trend graph’ report is exported, it displays the same graph for hourly and weekly comparison graphs. This issue is fixed.
• Firewall: Cisco Meraki is discovered as ‘proxy server’ instead ‘firewall’ in Firewall Analyzer. This issue is fixed.
• Firewall: When server side PDF export is set as 'All’, it is not working. This issue is fixed.
• Firewall: When ‘Denied User Report’ is drilled down from Dashboard, page is empty. This issue is fixed.
• Firewall: Raw search result displayed in the UI is grouped based on the specified criteria.
• Firewall: Quick links are added for ‘Credential Profile’ page.
• Firewall: Quick links are added for ‘Archive Encryption’ page under Security settings.

Build No 123280 - January 8, 2019

• OpManager: Storage device support has been added for EMC Unity and EMC VNXe3200.
• OpManager: There were issues with discovery and data collection in EMC VNXe3150, EMC VNXe3300 and EMC Isilon. This has been fixed now.
• OpManager: Previously, it was not possible to clean up the Event Table manually. This can now be configured from the Database Maintenance page.
• OpManager: Alarm notes continued to exist even after the associated alarm was deleted. This issue has now been fixed.
• OpManager: The XSS vulnerability in report name and description has now been fixed.

Build No 123279 - January 7, 2019

• OpManager: In Maps, option to filter devices based on category has now been added for 'Rack Builder’.
• NCM: The XSS Vulnerability in 'addScheduleforConfig’, 'addLabel’, 'updateLabel’, 'addShowCommand’, 'addSharedCredentialProfile’, ‘updateSharedCredentialProfile’ API’s has been fixed.

Build No 123278 - January 4, 2019

• OpManager: Probe installation has been authenticated.
• OpManager: The unauthenticated access to Enterprise edition servlets has now been fixed.

Build No 123277 - January 3, 2019

• OpManager: The SQL injection vulnerability in ‘getDeviceCompleteDetails’ and ‘getAssociatedCredentials’ API’s have been fixed.

Build No 123276 - January 3, 2019

• OpManager: Unauthenticated access to 'AgentActionServlet’, 'DataAgentHandlerServlet’, 'FileCollector’, ‘RegisterAgent’ and ‘StatusUpdateServlet’ used for agent based file monitoring functionality has now been restricted.

Build No 123241 - 123275 - December 31, 2018

• OpUtils : Under Inventory, Actions column with scan and delete option is made available which makes it easier to do these functions.
• OpUtils : Under Inventory, approving of subnets can be done in a few clicks now by selecting the ‘Approve’ option found in discovered subnets.
• OpUtils : Previously under Inventory, ‘Approve Subnets’ tab didn’t display the subnet address and mask values of a selected subnet. The issue is fixed now.
• OpUtils : Under Inventory, ‘Added Time’ column is added and many other irrelavant columns are removed from the discovered subnets of IPAM.
• OpUtils : Under Inventory, an appropriate message is now displayed when bulk subnets are selected for approval.
• NCM: “Grid view” option has been introduced in the Device Group page. Now, users can switch between “Grid View” and “Widget View” as per their need.
• NCM: Look and feel for info messages in all the forms have been changed.
• NCM: All the reports can be generated in both Widget and Grid View for device groups directly from the Device Group page.
• NCM: Tasks can be scheduled for all the device groups directly from Device Group page.
• NCM: Users can now run compliance check and associate groups to compliance policies directly from Device Group page.
• OpManager: Under Server dashboard, two new types of Heat maps have been introduced to represent all file and folder monitors associated to the respected devices in OpManager.
• OpManager: New default reports have been introduced for VM Sprawl data under Virtual server reports.
• OpManager: 34 new monitors for disk, memory and processor have been added in addition to the existing WMI monitors.
• OpManager: In VMware/ESX discovery, VMware datastore of type ‘VSAN’ were not discovered. ‘VSAN’ support has now been included.
• OpManager: If VMware ESX had either a ‘HostPortGroup’ or a ‘HostVirtualSwitch’ with the same name (case insensitive), there were issues with vCenter/ESX server discovery. This has now been fixed.
• OpManager: When an unmonitored ESX host under vCenter is monitored by mapping from the vCenter snapshot page, hardware monitor for that ESX Server was not initiated even when it was enabled. This issue has now been fixed.
• OpManager: During HyperV server discovery, some HyperV server entities were not discovered in certain cases. This issue has been fixed.
• OpManager: When a large number of VMware events were raised, they were not reflected in the monitored vCenter/ESX servers. This issue has been fixed.
• OpManager: During multiple XenServer or server pool discovery, storage repositories and networks were discovered only for one pool. This issue has been fixed.
• OpManager: Under Discovery, when multiple credentials were selected, the device was discovered under ‘unknown’ category. This issue has been fixed.
• OpManager: Previously, in SNMPv3 discovery, engineID was duplicated for different devices. This has been fixed and now if engineID matches with engineID of already added device, then the device will be added as Non-SNMP Device.
• OpManager: Rebooting the device caused SNMPv3 data collection to stop. This issue has been fixed.
• OpManager: Previously, Test credentials displayed status as ‘Pass’ even when the credentials were wrong. This has been fixed now.
• OpManager: No proper error message was displayed when MIB browser was not working with SNMPv3 credentials. This has now been fixed.
• OpManager: The flash Business view was not accessible by the operator user. This issue has been fixed.
• OpManager: The link generated using ‘Embed widget’ was not working for Rack view, 3D Floor view and Floor details widget. This issue has now been fixed.
• OpManager: When editing custom fields in device snapshot page, the encoded characters were displayed for all other languages apart from English. This issue has now been fixed.
• OpManager: For CLI snapshot page credentials, the prompt value for 'Command’, ‘Login’ and ‘Password’ were displayed as an encoded character. This issue has been fixed.
• OpManager: In Interfaces view under 'Inventory’, the interfaces are now sorted based on 'ifIndex’.
• OpManager: Previously, accessing Downtime Schedules from Settings --> Configuration–> Downtime Schedules displayed a blank page. This issue has been fixed.
• OpManager: Previously, accessing Rule Engine from Settings --> Configuration --> Rule Engine displayed a blank page. This issue has been fixed.
• OpManager: In Maps, when refreshing the tab after selecting and saving ‘Google Maps’ as the primary option, ‘Zoho Maps’ was displayed again. This issue has been fixed.
• OpManager: Warning messages for certain actions has been added to provide better clarity.
• OpManager: The link status and traffic load were missing in the NOC view and Dashboard. This has been fixed.
• OpManager: The loading time for all devices in business view has been optimized.
• OpManager: It was not possible to generate interface graphs for a custom time period. This issue has now been fixed.
• OpManager: The loading speed has been optimized for:
  • Device Template list page.
  • Vendor Template list page.
  • Edit Device details page.
• OpUtils: Under Settings of Switch Port Mapper, dropdown options such as port number and interface name are given inorder to show port label text in switch snapshot page.
• OpUtils : The Community Checker tool, which scans the range of IP Addresses to get their SNMP read and write community strings in the network, has been brought back under SNMP tools.
• General: SQL injection vulnerabilities in unauthenticated servlets has been fixed.
• OpUtils : Under Mac-to-IP Mapping, The XSS vulnerability issue in addRouter API has been fixed.
• OpUtils : Under IPAM Settings, The XSS vulnerability issue in addIPAMScheduler API has been fixed.
• NetFlow : Inventory updater feature that fetches device details on scheduled time, has been introduced.
• NCM : Automatic Change Detection was not working. This issue has now been fixed.
• General : SMS notifications via the SMS gateway was not working properly when the proxy settings were configured. This issue has now been fixed.
• General : Password length of Mail Server Settings and Proxy Server Settings have been increased.
• General : Quicklinks and info messages have been added to help the user with ‘How-To’ and ‘FAQ’ in the Notification Profile, User Management, Mail Server Settings, Proxy Settings and Rebranding pages.
• General : When a CCTV view was deleted from the CCTV list, the Dashboard kept loading for a long time. This issue has been fixed.
• General : In CCTV view, the seconds timer sometimes displayed a negative value. This issue has been fixed.
• General : In some cases, there was an out of memory (OOM) issue during product startup. This has now been fixed.
• OpManager : A message variable has been added to include Probe Name details in alerts from the Central’s Notification Profile.
• OpManager : Unable to save Run Program Notification Profile, when Arguments length exceeded 250 chars. This issue has now been fixed.
• OpManager : Unable to save Run System Command Notification Profile, when Command String length exceeded 250 chars. This issue has now been fixed.
• NetFlow : WLC widgets now support SSID Group resource type.
• NetFlow : Schedule reports have been added for Access Point Group and SSID Group.
• NetFlow : Autonomous System details have been updated.
• Firewall : Vendor API based Compliance-Standards report for CheckPoint devices.
• Firewall : Export as CSV and Excel option has been provided for all Inventory and Reports drill-down pages.
• Firewall : Delete button alignment issue in Device-Rule list page issue fixed.
• Firewall : Fixed the ‘Grey’ color assigned to one of the Protocol-groups in the ‘Traffic Statistics’ graph which looks odd with the graph background.
• Firewall : Some unwanted resource check has been removed in the dashboard pages to improve the page loading.
• Firewall : ‘Delete’ option is shown as button now in Imported Logs, Device-Rule, Exclude-Criteria, Credential Profiles and Archived Files list pages.
• Firewall : Removed the ‘Group Chat’ icon in vertical tab UI.
• Firewall : CheckPoint log-import issue fixed for non-English OS installations.
• OpManager : In Notifications Profile, SNMPv3 support has been provided for trap forwarding. This option can be found in the Trap Profile section.
• OpManager: In Workflow, info messages have been added to indicate the types of scripts supported in ‘Execute Windows Script’ and 'Execute Linux Script’, and to indicate the supported command line arguments in 'Execute Scripts’.
• OpManager: While creating a new workflow, each action will display a note of supported devices on which that particular action can be executed.
• OpManager: Confirmation messages will now be displayed before redirecting to the ‘Log a Ticket (SDP) Configuration’ or ‘Mail Configuration’ pages.
• OpManager: The ‘Traps’ heading has been changed to ‘SNMP Trap Processors’ in the Trap Processor list view page.
• OpManager: Learn more and quick links have been provided for 'Alarm Escalation’, ‘Workflow’ and 'SNMP Trap Processors’.
• OpManager: In the Alarms page, there was an alarm count mismatch issue with the total alarms displayed as a pie-chart and the alarms displayed based on the severity. This issue has been fixed.
• OpManager: Previously, a few search filters in the Alarms page were not working properly. This issue has now been fixed.
• OpManager: In the Inventory page, while using ‘filter by probe’ option, the page count was displayed as zero. This issue has now been fixed.
• OpManager: “Log a ticket” task does not work when SDP or SDP-MSP is integrated after the Servlet API is upgraded to Rest API. This has been fixed now.
• OpManager: When Execute Workflow is clicked, the workflow executes more than once. This has been fixed now.
• General: The XSS vulnerability in alarm escalation has been fixed.
• OpManager: Previously, it was not possible to export a PDF in Russian language. This has now been fixed.
• OpManager: Timeout configuration is now available for SPD/SDP MSP.
• OpManager: It is now possible to configure the ‘Availability time’ format.
• OpManager: Option has been added to configure image position for ‘Report Header’.
• OpManager: The message box in ‘Schedule This’ option is now customizable with additional params.
• OpManager: Previously, it was not possible to properly identify the utilization peaks in ‘Report builder’ interface. This has now been fixed.
• OpManager: In snapshot page, host name alias support is now provided for on click PDF.
• OpManager: There were issues with the option to exclude days in ’Top n’ reports. This has now been fixed.
• OpManager: The reports triggered from the ‘Notification profile’ had a few issues in other languages apart from English. This has now been fixed.
• OpManager : Storage Monitoring : Previously, there were issues in discovery and data collection in PureStorage storage devices. This has been fixed now.
• OpManager : Domain controller devices were not categorized as “Domain controller” when they were discovered through Network discovery. This issue has been fixed.
• OpManager : Layer2 Discovery failed when the length of the discovered device type exceeded 50 characters. This issue has now been fixed.
• OpManager : In Discovery, the rule engine to associate script monitor failed when the threshold was configured. This issue has now been fixed.
• OpManager : While saving SNMP credential, it was not possible to save the credential type as "None". This issue has been fixed.
• OpManager : Under Discovery settings, a new option “Use DNS as DisplayName” is provided to set the DNS name as the display name after discovery.
• OpManager : The ‘Edit Threshold’ button was hidden when importing device templates. This has been fixed.
• OpManager : In the bulk credentials association page, there was no option to filter results based on ‘Category’ or 'Business view’. This has been added.
• OpManager : From the interface configuration page, when navigating to other listed pages from the first page, the selected configuration options were not updated. This issue has been fixed.
• OpManager : In the import devices page, there was no search option. This has now been added.
• OpManager : The discovery settings configuration page has been moved from Settings > Basic Settings > System settings to Settings > Discovery
• OpManager : Previously, there was an issue with Lucent-Xedia and Nortel Networks’ device templates. This issue has been fixed.
• OpManager : Previously, interface data collection stopped when bandwidth exceeded the specified value. This issue has been fixed.
• OpManager : Previously, Bandwidth Utilization was calculated based on IFSPEED. Now, the same calculation is performed based on INSPEED and OUTSPEED.
• OpManager : Previously, configuring an unmanaged interface caused OpManager to manage that interface. This issue has been fixed.
• OpManager : Previously, there was a ‘?’ (Question mark character) in the device template’s Name and OID for Intel device templates. This issue has been fixed.
• OpManager : Previously, it was not possible to view interface reports due to big values in the interface data. This issue has now been fixed.
• OpManager : Ping failure case has been implemented for TTL (Time-to-live) expired message.
• OpManager : In the Dashboard, same data was displayed in all the interface bandwidth widgets. This issue has now been fixed.
• OpManager : Metrics for ‘95th percentile value’ has been included along with the ‘95th percentile average’ in Interface graphs.
• OpManager : For newer versions of Windows, the type will be classified in OpManager with an entry in the XML file.
• OpManager : In the Inventory page, bulk deletion of devices was time consuming .This issue has been fixed.
• OpManager : The Linux FreeBSD device was not classified properly. This issue has been fixed.
• OpManager : During scheduled discovery, the RAM and HardDisk size were not updated in the device snapshot page. This issue has been fixed.
• OpManager : Previously, the ‘Packet Loss’ dial in snapshot page displayed the day’s average value instead of the last packet loss value. This has now been fixed.
• OpManager : In e-mails sent using the ‘Send Email’ notification profile with the custom message variable '$IntfField(ipAddress)', the device IP Address was displayed instead of the interface IP Address in the ‘Interface Details’ section of the message. This issue has been fixed.
• OpManager : The Downtime report displayed incorrect devices for the selected interval. This has been fixed.
• OpManager : For Business View users, the ‘Device Availability Dashboard’ report displayed devices that the user was not authorized to view. This issue has been fixed.
• OpManager : There were a few usability issues in the Device Template page.This has now been fixed.
• OpManager : In the Interface graph widget, there was an overlap issue with the graph.This has now been fixed.
• OpManager : In the Discovery page, ‘Execute Now’ option has been added to instantly start discovery.
• OpManager : Usability issues in the Discovery page have been fixed.
• OpManager : In BusinessView, the status did not get updated when the BusinessView shortcut was placed in a circular manner. This issue has been fixed.
• OpManager : In Maps, the satellite view button was not displayed for Google Maps. This issue has been fixed.
• OpManager : In the Downtime Scheduler page, option to Enable/Disable schedules has now been provided.
• OpManager : The Interface Bandwidth report has been renamed as Interface Speed Report. The columns ‘Transmit Bandwidth’ and ‘Receive Bandwidth’ have been renamed as ‘Out Speed’ and ‘In Speed’ respectively.
• OpManager : Adding a discovery rule engine can now be done from the 'Discovery Profile’.
• OpManager : The following titles/labels have been renamed across the product.
  • ‘Downtime Schedules’ to 'Device Downtime Schedules’.
  • ‘Telnet/SSH/SNMP’ in NCM to 'Backup Credential’.
  • ‘Rule Engine’ to 'Discovery Rule Engine’.
  • In Custom Fields, ‘Import field properties from CSV’ to 'Import from CSV’.
  • In Discovery profile, the ‘Add filter’ button as 'Add Discovery Filter’.
• OpManager: The navigation for the following pages have been changed.
  • The Categories tab has been moved to ‘Configuration’ from 'Basic settings’.
  • The IPSLA tab has been moved from ‘Configuration’ page to ‘Monitoring’ tab under Settings.
  • The ‘Monitoring Interval’ tab has been moved to ‘Quick Configuration Wizard’ page under Configuration.
• OpManager: Under 'Reports’, a new hardware information report to show the basic hardware information has been included for all the hardware monitoring enabled devices.
• OpManager: A dedicated tab has been introduced for all the monitors in the device snapshot page.
• OpManager: In the Inventory, new main level tabs have been introduced for 'Network’, ‘Server’ and ‘Virtual’ devices for easier navigation and sorting.
• OpManager: Previously, exchange monitors could not be saved if the path name of the storage location had ‘.’ character. This has now been fixed.
• OpManager: When a new event rule was added with an existing rule name, the action was not restricted and actual events were not generated due to a change in Eventlog ID. This has now been fixed.
• OpManager: Events with the Eventlog ID set as ‘0’ were not received. This issue has been fixed.
• OpManager: Without enabling the monitoring interval for 'Event Log’, when trying to associate event log monitors to a device in OpManager from the 'Quick Configuration Wizard’, ‘Snapshot page’ or 'Rule Engine’, event log monitoring for those devices were not enabled automatically. This issue has been fixed.
• OpManager: If any new event log rule was associated to the device using 'Rule Engine’, the event log monitoring interval for that device was set to 5 minutes by default. This has been fixed.
• OpManager: It was not possible to reset the uplink dependency for the device once it was set to some value, even after selecting the value as 'None’. This has been fixed.
• NetFlow : Added options to Create, Modify, and Delete SSID groups.
• NetFlow : In the Inventory, Snapshot reports have been added for SSID groups.
• NetFlow : SSID groups now support Capacity planning and Consolidated reports.
• NetFlow : An option to assign SSID Groups for Operator, and Guest users has been provided.
• OpUtils: For other language installation, iTextAsian.jar file has to be downloaded by the user. This download message has been enhanced and is displayed clearly in OpUtils’s UI.
• OpUtils : Under Bandwidth Monitor in Inventory, the page was redirected to ‘Add switch’ page when Edit option of ifName is clicked. This issue is fixed now.
• OpUtils : Under Inventory, the “No records to view” message was not shown even when there is no data available. This issue is fixed now.
• OpUtils : Under Bandwidth Monitor in Inventory, when ‘List Tools’ icon is clicked the page is redirected to device snapshot page after the tools list is shown. This issue is fixed now.
• OpUtils : Added ‘Tray’ Icon for Windows installation to start, stop, and get status of OpUtils.
• OpUtils : Action class has been removed as it causes vulnerabilities in the product.
• OpUtils : The Horizontal menu in the UI is enhanced in such a way that an “Add Device” option is added to Inventory, IP address manager, switch port mapper, etc. when the mouse hovers over it.
• OpUtils : Under Settings, the “Maintain scan result of last 7 days” option of publish function didn’t work properly. The issue is fixed now.
• OpUtils : Under Switch Snapshot page, the custom column’s validation doesn’t work when updating the boolean and integer data type. The issue is fixed now.
• OpManager : When functional expressions are applied to an SNMP monitor, the value of the monitor was duplicated with the other SNMP monitors. This issue has been fixed.
• OpManager : OpManager now supports Layer2 discovery for other devices apart from routers and switches. This can be configured by making an entry in the "layer2Discovery.properties".
• Firewall : New device log support - VarioSecure firewall.
• Firewall : Automatic Security Audit report generation for Check Point (R-80.10 and above) devices using API.
• Firewall : CLI based Policy analysis, Rule management and Compliance support for pfSense firewalls.
• Firewall : Added Line and Bar graph options for device and interface Live reports.
• Firewall : XML External Entity Injection(XXE) vulnerability raised in report-profiles import.
• Firewall : Cross Site Scripting Vulnerability raised in ManualDns-Mapping entry.
• Firewall : Support-Id: 4811677 : Raw Search returned no data, if the search period is more than a month.
• Firewall : Support ID 4909346: Fixed the Device Rule configuration failure issue, in HA mode of FortiGate with VDOM setup.
• Firewall : Support ID 4909346: Fixed the issue of showing password in plain text, in the Device Rule submit response.
• Firewall : Support ID 4919514: Fixed the issue of embed widget not working, in CCTV view.
• Firewall : Support ID 4927087: New column added to display Cisco ACE hex code in Raw search results page.
• Firewall : Support ID 4553065: Fixed Squid proxy server parsing issue.
• Firewall : Support ID 4934078, 4950793: Fixed the issue of wrong client IP assignment for Cisco VPN.
• Firewall : Fixed the issue of Scheduled Rule fetching failure for Check Point, due to CLI connection attempt.
• Firewall : Huawei device change management reports are loaded with full configuration instead of changes alone. Fixed the issue.
• Firewall : Added default exclude criteria for SonicWall devices to remove dynamic key updates as changes from Change Management Report. Fixed the issue.
• Firewall : Policy Overview Schedule list page displayed schedule details of all the devices. Fixed the issue to display the schedule details of only selected devices.
• Firewall : Was able to configure SNMP for Unmanaged devices. Fixed the issue.
• Firewall : No criteria is displayed for Policy Overview Scheduled reports when report specific criteria is provided. Fixed the issue.
• Firewall : For proxy devices Live Traffic is displayed in dashboard but not in Inventory page. Fixed the issue.
• Firewall : In Raw Search mail content PDF Report, Criteria value had extra details other than user configured criteria. Removed those unconfigured criteria and fixed the issue.
• Firewall : Exception thrown when Diagnose connections page is clicked in Settings tab. Fixed the issue.
• Firewall : In Settings, under User Management - Add/Edit User - Device list page, the deleted devices are also listed. Fixed the issue.
• Firewall : In Configuration Changes Mail Notification, Mail content has Disable link in the start of the mail. Moved the Disable link message to end of the Mail to fix the issue.
• Firewall : Fixed the issue of custom widget addition for Live Traffic without selecting a device, by ignoring the status message.
• Firewall : Fixed the issue of no redirection to reports page when the ‘Unknown’ user is clicked in Inventory > Users tab.
• Firewall : Added the missing ‘Security settings’ option in Admin server.
• Firewall : When device configuration fetching is in progress, other tabs cannot be accessed. This issue is fixed.
• Firewall : Due to pagination, in Rule Management page the ‘Export to Excel’ option was hidden. The issue is fixed to display the option.
• Firewall : In menu hover option, configured custom reports are displayed.
• Firewall : New help page links provided for Syslog server, Manual DNS and Security Audit report pages.
• Firewall : Minor UI issues are fixes.
• NetFlow : The currency list for billing feature is updated.
• NetFlow : Introduced an option to select multiple combinations of IP address for “From” and “To” in Between Sites IP Grouping.
• NetFlow : Bulk load option to upload multiple unmapped applications is introduced in Application Mapping.
• General : During API calls, there was an ‘APIKey’ exposure vulnerability. This issue has been fixed now.
• General : There was an issue with the timezone displayed in the graph of an embedded NFA widget. This has now been fixed.
• OpManager : Support for alarm variables as in Notification profile has been provided for ‘Send email’ task in Workflows.
• OpManager : Previously, there was a compatibility issue with EMC VNX File devices. It has been fixed now.
• OpManager : There were issues with adding a single RAID device under any Dell EqualLogic device. This has been fixed now.
• OpManager : Clickjacking vulnerability in Reports has been fixed now.
• OpManager : Previously, when OpManager was loaded with the ‘Check URL’ task in Workflows, the web client became unresponsive. This issue has been fixed now.
• OpManager : The create new report UI has been revamped.
• OpManager : The create new virtual server report has been revamped.
• OpManager : The schedule reports list view has been revamped.
• OpManager : The create schedule report UI has been revamped.
• OpManager : An empty schedule report page has been added.
• OpManager : The reports list UI has been revamped.
• OpManager : Create new reports, the monitor field displayed undefined values for certain vendors. This issue has been fixed.
• OpManager : In the OpManager mobile application, support has been added for alarms to be pushed as notifications based on the user’s role.
• OpManager : Option to filter alarms based on the device and their severity level has been included in the mobile application.
• OpManager : Option to 'Acknowledge’, ‘Unacknowledge’ or ‘Clear’ alarms has been provided based on the alarm.
• OpManager : Alarm Escalation feature has now been extended for URL Monitoring.
• OpManager : Custom Time Period option has been added for Alarm Suppression.
• OpManager: Usability issues in the Discovery page have been fixed.
• OpManager: There were a few usability issues in the Rule Engine page. This has now been fixed.
• OpManager : Previously, Devices are not listing properly in Packetloss/Response time global threshold page.This issue is fixed now.
• OpManager : Previously, Devices Availability Dashboard Report graph time format issue occurred when a period 7 days or 30days, was selected. This issue is fixed now.
• OpManager : The “Configure Interface” option provided for Firewall devices.
• OpManager : ‘Disk’ and ‘RAM’ details are now hidden in Switch and Router device summary.
• OpManager : Previously, there were issues with the associate credentials action. This has now been fixed.
• OpManager : In Maps page, the Device count was only shown in the Business View section. This issue has now been fixed.
• OpManager : In device snapshot page, Interface’s real time graph was not shown if there were special characters in the interface name. This issue has now been fixed.
• OpManager : When rediscovering interfaces, rediscovery failed when the interface count exceeded 500. This issue has been fixed.
• OpManager: Previously, subInterfaces were not being rediscovered during Rediscovery process. This issue has been fixed.
• OpManager: While rediscovering interfaces, there was an issue with rediscovering interfaces of Fortinet devices. This has now been fixed.
• OpManager : In Device templates, there was a problem with ‘StringtoNumeric’ dials. This issue has been fixed.
• OpManager : The category of Eaton 9SX 5000 has been changed from Desktop to UPS.
• OpManager: Language localisation for several values and fields is now done for Spanish, German, Korean, France and Italian languages.
• OpManager: While adding monitors in the ‘Monitoring’ page under settings, an option has been provided to associate the monitors directly to device, without having to come back to Monitoring page again.
• OpManager: In the ‘Monitoring’ page under settings, a link has been provided for all monitors to view the respective devices linked to that specific monitor.
• OpManager: While adding URL Monitor, if ‘Check URL’ operation is performed, then it led to a vulnerability if user has given any concealed javascript code in the url address field. This issue has now been fixed.
• General : Pre-populated Database has been bundled with the Windows 64Bit build.
• OpManager : The ‘Last Polled Value’ and ‘Last Polled Time’ have been added in script monitors.
• OpManager : The custom script template webpage can now be accessed from the OpManager UI.
• OpManager : In the ‘Test credential’ page under device snapshot, the SSH key file update issue has now been fixed.

Build No - 123240 - December 24, 2018

• OpManager: The SQL injection vulnerability in ‘getDeviceCompleteDetails’ and ‘getAssociatedCredentials’ API’s have been fixed.

Build No - 123239 - December 20, 2018

• General : There was an SQL injection vulnerability in the Alarms section. This issue has been fixed. (Refer: CVE-2018-20338)
• General : In Alarms, there was an XSS vulnerability in the Notes column. This issue has been fixed. (Refer: CVE-2018-20339)

Build No - 123238 - December 14, 2018

• OpManager: The SQL injection vulnerability in ‘getGraphData’ API has now been fixed. (Refer: CVE-2018-20173)
• Firewall: For Firewall Alarms, Alert details were not shown. Now the issue is fixed.

Build No - 123237 - December 6, 2018

• General: XSS vulnerability issue in domain controller has been fixed. (Refer: CVE-2018-19921)

• OpManager: In script templates, the XSS vulnerability in name and description field has now been fixed.

Build No - 123231 - November 29, 2018

• General: Apache’s ‘commons-beanutils’ jar has been updated to version 1.9.3 due to ‘Remote Code Execution’ vulnerability in an older version. (Refer: CVE-2018-19403)
• General: Unauthenticated access to ‘DataMigrationServlet’ has been fixed. (Refer: CVE-2018-19403)
• General: The ‘Browser Cookie theft’ vulnerability has been fixed.
• General: XSS vulnerability in alarm escalation has been fixed.

Build No - 123230 - November 15, 2018

• NetFlow: The issue with NBAR application data in Wireless Controllers has been fixed.
• NetFlow: Missing I18N keys have been added for Chinese language.

Build No - 123229 - November 15, 2018

• General: Under Tools, The XSS vulnerability issue in getPing API has been fixed.

• General: Under Tools, The XSS vulnerability issue in getTraceRoute API has been fixed.

• General: Under Tools, The XSS vulnerability issue in saveSystemDetails API has been fixed.

• OpUtils: Under Config File Manager, the history of an IP was not properly displayed and it showed 'Undefined’. This issue is fixed now.

• OpUtils: Under Config File Manager, the upload config option did not enlist the device name that is selected. This issue is fixed now.

Build No - 123224 - November 14, 2018

• Firewall: XML External Entity Injection Vulnerability is fixed, while importing Custom Report/Alert profile.xml
• Firewall: Cross Site Scripting Vulnerability is fixed, while adding User defined DNS name.
• Firewall: Raw Search returned no data if search period is more than a month. This issue is fixed (Support-4811677)

Build No - 123223 - November 13, 2018

• NCM: Syslog Change Detection issue has been fixed.
• General: In the Inventory Snapshot page, there was a colour mismatch issue with the legend status color in the pie-chart. This issue has been fixed.
• General: The XSS vulnerability issue in updateWidget API has now been fixed. (Refer: CVE-2018-19288)

Build No - 123222 - November 2, 2018

• General: SQL injection vulnerability in Mail Server settings has been fixed. (Refer: CVE-2018-18949)
• General: Previously, there was an exception while processing clear cache requests. This has now been fixed.
• OpManager: While adding an email-notification profile, email fields were not being populated from the mail-server settings. This issue has now been fixed.

Build No - 123221 - October 31, 2018

• Oputils: Under Inventory, details were not properly displayed under sub filters, in the left side of the page.This issue is fixed now.

• OpUtils: Under IP Address Manager in Inventory, the IP -> DNS column data was not displayed. This issue is fixed now.

Build No - 123220 - October 30, 2018

• OpManager: Issue in SNMP Test credential has been fixed.

Build No - 123219 - October 25, 2018

• OpManager: When importing a URL using CSV action/API, the header information from the CSV file was reflected to the user. This lead to a vulnerability of concealed Javascript code being executed. This issue has now been fixed.
• OpManager: Previously, there were issues in saving email addresses in the notification profile because of newly added security restrictions. They have now been fixed.
• OpManager: The XSS vulnerability issue in addNewAdditionalField API has been fixed.

Build No - 123218 - October 19, 2018

• Firewall: New Log Format Supported - Barracuda Email Security Gateway
• Firewall: Policy/Rule analysis, compliance report support and fetching configuration using firewall vendor API
  • Check Point devices
• Firewall: Policy/Rule analysis, compliance report support and fetching configuration using CLI
  • Vyatta firewalls
  • Huawei firewalls
• Firewall: Added ‘Tray’ Icon for Windows installation to start, stop, and get status of Firewall Analyzer.
• Firewall: Changed ‘Support’ tab look and feel.
• Firewall: New reports ‘Active VPN Users’ and ‘VPN User Session Details’ added under VPN reports.
• Firewall: Quick links and Help cards provided for Discovery and Search reports.
• Firewall: Selected ‘Time Period’ retained in all drill down snapshot reports, after zooming the time in live traffic widget.
• Firewall: Enterprise Edition data exchange between Admin and Collector servers made secure for each requests and response.
• Firewall: Firewall Analyzer startup time optimized; Made the internal modules to start in parallel.
• Firewall: ‘Raw Settings’ page moved to ‘Search’ tab from ‘Settings’ page to avoid shuffling between tabs.
• Firewall: (Support ID: 4795348) Change Management report for SonicWALL displays user names, who do not have access to firewall configuration. Fixed the issue.
• Firewall: Cisco-Meraki log parsing issue fixed.
• Firewall: Log parsing of Sophos and Cyberoam devices tuned to handle more log rate.
• Firewall: Occasionally, ‘Raw Tables’ are not split properly, when log rate is high. Fixed the issue.
• Firewall: In ‘Rules Report’ page, if the number of rows is less than 10, the CSV, Excel export option is missing. Fixed the issue.
• Firewall: SNMP settings page is not closed automatically on successful configuration from ‘Inventory’ snapshot and list page.
• Firewall: Fixed the issue of removing unnecessary API calls when criteria based ‘Search’ reports is loaded.
• Firewall: Fixed the issue of table border misalignment for all the report table grids.
• Firewall: Fixed the issue of headers for PaloAlto and NetScreen devices in ‘Policy Overview’ report by changing the ‘Source Interface’ & ‘Destination Interface’ headers to ‘Source Zone’ & 'Destination Zone’.
• Firewall: When ‘Only on Week Days’ option is selected in 'Daily-Schedule’, it was not working. This issue is fixed.
• Firewall: ‘Policy Overview’ tab name changed.
• Firewall: ‘Unused Rule’ header name changed.
• Firewall: In ‘Remote Host’ option of ‘Import Logs’ page, the selected file is not getting marked. This issue is fixed.
• Firewall: Fixed the issue of device name display in ‘Live Traffic’ widget even after the device is unselected.
• Firewall: Fixed the issue of unrestricted ‘Save’ in ‘Live Traffic’ widget, if no device is selected.
• Firewall: Fixed the issue of ‘Icon’ only option for horizontal menu change is not working in Central-Server.
• Firewall: Fixed the issue of empty ‘Standards’ page, when the status of all firewall devices is 'UnManaged’.
• Firewall: When ‘Intranet Settings’ is saved without any criteria, instead of alert message, it is getting saved. Fixed the issue to show alert message.
• Firewall: In the ‘Inventory - Device’ detail widget, page redirection happens only when text is clicked. Fixed the issue for page redirection when clicked anywhere in the device row.
• Firewall: Fixed the issue of missing ‘On Demand’ column header in ‘Device Rule’ settings page.
• Firewall: Fixed the issue of missing tool tips for few icons.
• Firewall: For Windows firewall, UDP port unblock rules added for Syslogs packets.
• Firewall: For Windows firewall, TCP port unblock rules added for Telnet and SSH.
• NCM: Configlet execution results of multiple devices can now be exported as PDF in bulk.

Build No - 123217 - October 17, 2018

• General: TCP / UDP port unblock rules for NetFlow packets / Syslogs packets have now been added in Windows Firewall.
• NCM: Upload request option which was previously in settings tab, can now be easily accessed from the “Change Management” tab in the main menu.
• NCM: While exporting configurations, you can now give the folder name in both text and numeric formats.
• NCM: The start date issue of the daily schedule feature has been fixed.
• NCM: Form validations throughout NCM have been revamped.
• NCM: Issue while swapping configuration versions in the Config Diff view has been fixed.
• NCM: The TFTP service had an issue when the central and probe were installed on the same machine, this has been fixed now.
• NCM: SysOID finder’s timeout issue has been fixed.
• NetFlow: Export Flow option has been added for NetFlow, and Flows can now be exported from the GUI.
• NetFlow: How-To’s and FAQ’s have been added for Settings and Report pages.
• NetFlow: An option has been added to view the Menu tab horizontally with mouseover links.
• NetFlow: Added summary pages for Reports and Settings to list all menus in a single page.
• NetFlow: WLC widgets now support Access Point and Access Point groups resource types.

Build No - 123216 - October 15, 2018

• General: After the upgrade, the web client failed to load successfully, because the REST API tables were not properly populated. This issue has been fixed.
• General: In Submit Query, an option has been provided to export the query as a CSV file.
• General: Port dependencies for unused ports (NMS_FE_SECONDARY_PORT, PORT_TO_LISTEN) have been removed.
• OpManager: ‘&’ character is now supported in Notification Profile email addresses.
• OpManager: In the Dashboard, Google/Zoho maps did not load properly in the widget. This issue has been fixed.

Build No - 123215 - October 12, 2018

• OpUtils: A ‘Getting Started’ page has been added to guide the users with a step-by-step procedure for using OpUtils.
• OpUtils: Added an option to switch menu bar from vertical alignment to horizontal alignment and vice versa.
• OpUtils: Under Reports option, the ‘Connected IP Details’ report which provides details about the ports connected to the corresponding switches, and IP addresses has been added.
• OpUtils: IPAM now supports IPv6.
• OpUtils: Under settings, the ‘Add Device’ in MAC-to-IP mapping is enhanced such that it supports import option for SNMPv3 now.
• OpUtils: Under settings, the ‘Add Device’ in MAC-to-IP mapping is enhanced such that it supports CLI settings(available only for switches and routers) now.
• OpUtils: Under Inventory, the snapshot page of SPM, IPAM, Config management and Bandwidth Monitor is enhanced such that it provides quick links like 'How-to’, 'faq’s’, etc now.
• OpUtils: Previously, the MIB browser tool didn’t respond to the SNMP version 2 credentials. The issue is fixed now.
• OpUtils: Previously, there were issues in restoring backed up database if the custom columns are created. The issue is fixed now.

Build No - 123214 - October 10, 2018

• OpManager: Previously, data collection in UCS devices stopped due to an expiration in the login session. This has now been fixed.
• OpManager: In Dashboard, widgets that included real-time data now have an image mode option for rendering graphs.
• OpManager: Previously, there was no option to include SNMP v3 credentials in the credentials list for vCenter/ESX discovery. This has been included now.
• OpManager: For vCenter discovery, if two or more datastores were found with identical path names and characters (with same or different letter case), the entire discovery process failed. This has been fixed now.
• OpManager: When no credentials were passed for a VM during VMware discovery, the vendor was updated as 'Unknown’. This has been fixed now, and the vendor will be updated as ‘VMware’ if no credentials are passed during discovery.
• OpManager: For HyperV VMs, it was not possible to add VIWMI monitors if the device type was Linux. This has been fixed now.
• OpManager: The XSS vulnerability issue in addCategory API has now been fixed. (Refer: CVE-2018-18262)
• OpManager: There was an unrestricted file upload vulnerability while uploading a background image in Business view. This has now been fixed. (Refer: CVE-2018-18475)
• OpManager: The XML External Entity (XXE) vulnerability in maps module has been fixed.(Reported by [email protected]) (Refer: CVE-2018-18980)
• OpManager: There was a resizing issue with the BusinessView Map, in both the Map View page as well as the dashboard widget. This has now been fixed.
• OpManager: If a router was being monitored with flow monitoring and hardware monitoring enabled, some users had trouble accessing the device’s snapshot page from Inventory. This issue has been fixed now.
• NCM: Information regarding the usage of SysOID in the UI has been added.
• NCM: An option to view the password for all password fields in NCM has been added.
• NCM: The grid row size selection is retained based on the user.

Build No - 123208 - October 8, 2018

• OpManager: In the Heatmap widget, the option to filter devices based on severity was not working. This has now been fixed.
• OpManager: The registration process for Probe-Central was not successful, causing a communication failure in Linux systems. This issue has been fixed.
• Firewall: Menu hover feature helps to access all sub tab options without the hassle of navigation.
• General: After updating to build 123181, there was a password mismatch issue for customers using the same password for ‘OpManager.truststore’ and ‘server keystore’ prior to the upgrade. This issue has now been handled.

Build No - 123207 - October 1, 2018

• OpManager : OpManager now provides the option of configuring multiple threshold severities for interfaces - Attention, Trouble and Critical.
• NCM: Now get faster fixes to your issues using self-support in the ’Support’ section of NCM.

Build No - 123206 - September 27, 2018

• OpManager : You can now directly access specific pages in OpManager without the hassle of navigating through multiple options by using the Hover Menu.

Build No - 123205 - September 19, 2018

• General : Previously, a blank screen showing “Loading” was displayed while trying to access a default dashboard which was deleted in an older version of OpManager. This has now been fixed.
• General : Users can now embed CCTVs using the shareable link generated from the NOC view menu.
• General : SQL Injection vulnerability in Global Search has been fixed.
• General: Users with restricted access to devices were able to create another user account with unrestricted access to all devices. This issue has been fixed.
• General : The product web-client now supports Russian and Chinese(Taiwan) languages.
• General : OpManager will now only support IE versions 10 and above.
• OpManager : The Install Shield Wizard now supports Japanese and Chinese languages.
• OpManager : In the NFA/NCM Dashboard, there was a widget overlapping issue while switching between Probes. This issue has been fixed.
• OpManager : Previously, Central did not properly load the Probe data in the NFA/NCM Dashboard. This issue has now been fixed.

Build No - 123204 - September 17, 2018

• OpManager: Module Activation option has been provided for Storage Monitoring.
• OpManager: Template operations like 'Edit’, ‘Delete’ and ‘Copy’ has been restricted for Storage devices.
• OpManager: XSS vulnerability issue in Storage Credentials has been fixed.
• OpManager: Support has been provided for wildcards in workflow actions. E.g. delete *.log or *.txt files, etc.
• OpManager: Changes have been made in Storage Monitoring to make it GDPR compliant.
• OpManager: Help links (How-to) has been added for Storage Monitoring.

Build No - 123198 - September 13, 2018

• OpManager : Option has now been added to save Layer2 maps as Business view.
• OpManager : Unauthenticated folder and file access has been restricted and the related vulnerability has been fixed.
• OpManager : A drop down box to change the device icon size has been added in Business views.
• OpManager : SQL injection vulnerability in setManaged API has been fixed.
• OpManager : In embed widget option, the images were not loading for the operator user. This issue has been fixed.
• OpManager : In businessview, the user was unable to edit the shortcut name. This issue has now been fixed.
• OpManager : In businessview, while performing the ‘copy as’ operation, some of the shortcuts went missing. This issue has been fixed.
• OpManager : In Maps page, there was an issue with the Businessview severity tooltip. This has now been fixed.
• OpManager : In addition to the existing monitors, more than 1000 new monitors have been added to OpManager. Now you can monitor more metrics and also monitor the metrics of various vendors.
• OpManager : Discover and auto-classify an even wider range of devices in OpManager with over 4000 newly added device templates.
• OpManager : Previously, adding more than two links between devices in a Business view caused the links to overlap. This issue has been fixed.
• OpManager : New line types have been introduced for links in Business views. Also, an option to manipulate the curved links for interface connections in Business view has been added.
• OpManager : When rediscovering a device after updating the pingable IP address in Device snapshot page, a duplicate device will be added. This issue has been fixed.
• OpManager : Previously, under ‘Network’ overview in the Dashboard, there was a mismatch in the Alarm count. This issue has been fixed.
• OpManager : Previously, there was a UI issue in the alert box displayed when closing a Business view without saving it. This has now been fixed.
• OpManager : ‘Ping’ option has been added to the ‘Add Device’ page. Users can now ping the device before device addition.
• OpManager : Now, an alert message is shown in the ‘Inventory list’ page when only a single device is listed. This helps the User redirect to the ‘Discovery’ page to add more devices.
• OpManager : Users can now view the total number of interfaces and down status for interfaces in the device snapshot page.
• OpManager : The usability of listing credentials in the ‘Add Device’ page has now been enhanced.
• OpManager : ‘Add Device to IPAM’ and ‘Add Device to NCM’ options have been moved to the settings tab in the ‘Add Device’ page.
• OpManager : In ‘Add Device’ page, if only the default credentials are available, an alert message is shown requesting the User to add their own credentials.
• OpManager: Tips have been provided when there is a device discovery failure to troubleshoot issues.
• OpManager: Device Type & Category has been included as part of Device Summary.
• OpManager: The Device Notes and Additional Fields, have been renamed as Custom Field across the platform/webclient.
• OpManager: The ‘Rediscover Device’ icon has been changed in the Device Snapshot page.
• OpManager: The ‘Configure Interfaces’ icon has been changed in the Interfaces Summary widget.

Build No - 123197 - September 10, 2018

• Firewall: F5 Firewall device support added.
• Firewall: Horizontal menu bar made as default.
• Firewall: ‘Add-Device’ menu added to export Syslogs from firewalls.
• Firewall: SSH or Telnet based ‘CLI terminal’ to access firewalls from Firewall Analyzer.
• Firewall: ‘Getting Started GUI’ to guide the user to add devices and reports.
• Firewall: ‘Quick links’ and ‘Help cards’ for settings and report pages.
• Firewall: For trial and registered users, ‘Live Chat’ facility to contact sales-engineering team.
• Firewall: Introduced ‘Password Policy’ configuration for user management.
• Firewall: Login page customization for rebranding custom images.
• Firewall: In all report pages, optimized alignment of widgets.
• Firewall: Firewall Analyzer users can set their default menu bar (horizontal or vertical) using ‘Menu Bar’ menu.
• Firewall: Fixed the issue of failure to fetch the device rule for Fortigate Vdom, because ‘Pager’ command was not working.
• Firewall: Fixed the issue of failure to display of rule management reports for Vdom firewalls.
• Firewall: ‘Select Policy’ menu not working properly in Firefox browser. Fixed the issue.
• Firewall: Fixed the drill down issue in 'Dashboard - Security - Top N Attacks by Hits’.
• Firewall: Single device and all devices selection not working in ‘Short summary’ page of ‘Inventory’ device lists. Fixed the issue.
• Firewall: If the widget subtitle contains ‘drill down link’ - we need to provide the drill down/redirect to inventory action, when we click the link alone
• Firewall: In the ‘Inventory - Short summary’ page, ‘Create Report/Alert Profile’ tabs missing, navigating after add or edit from the ‘Intranet, Exclude Host, Availability Alert’ pages. Fixed the issue.
• Firewall: Minor UI enhancements in ‘Inventory’ page.
• Firewall: In the Firewall Analyzer - Distributed Edition - Admin Server, when a firewall was deleted, there was no processing message shown. Fixed the issue to show firewall delete processing message.
• Firewall: ‘Delete widget’ was not working in the ‘Reports - Standard Report’ page. Fixed the issue.
• Firewall: In the ‘Inventory - Devices - Protocols’ page, ‘Protocol identifier’ options were missing. Fixed the issue.
• Firewall: In the ‘Active VPN Trend Report’ page, Y-axis values were not displayed properly & was throwing NullPointerException while drill-down. Fixed these issues.
• Firewall: In the 'Device Rule, Exclude Criteria, Protocol Groups, Device Groups, Intranet Settings, Cloud-Repository, Exclude Hosts, SNMP settings, Alarm Profiles and User-IP Mapping (DHCP, AD/Proxy, Manual Mapping)' pages, to edit an entry you have to click on it. Now a proper ‘Edit’ icon is provided for each entry.

Build No - 123196 - September 07, 2018

• General: The ‘oputilsServlet’ which was previously unauthenticated has now been removed (Reported by [email protected]).
• OpUtils: Previously, there was an issue in sending alert mails from IP address manager. The issue has been fixed now.

Build No - 123195 - September 06, 2018

• OpManager: Previously, the Remote desktop was possible only from old IE Versions. Now, Remote Desktop connection for windows can be accessed irrespective of the browser type i.e. Chrome/ Firefox/ IE.
• OpManager: Previously, ‘Active Process’ and ‘Installed Software Details’ was fetched only if WMI or SNMP credentials were passed. Now, It can also be fetched using CLI.
• OpManager: Previously, in Hardware Monitoring, options like Enable Hardware Monitoring, Suppress Hardware Alarm, Modify Monitoring Interval options were available only at the Global level i.e. applicable to either all or none of the devices. Now users can configure/update those options at each device level from the Hardware Monitor Tab inside the Device Snapshot page.
• OpManager: Now, the Hard Disk and RAM value will be updated using WMI, if WMI credentials are passed. Earlier, it was updated only using SNMP.
• OpManager: A new Recent Alarms specific widget has been included in the Hardware monitor tab of the Device Snapshot page to provide visibility into recent hardware alarms for that specific device.
• OpManager: Now, the ‘Sensor Specific Graphs’ widget inside the Hardware monitor tab has been grouped into widgets of specific sensor types for better visibility into sensor-specific data. It is provided as a separate Tab inside device snapshot page.
• OpManager: If RAM or HD value is greater than 1024 MB, then the value will be shown in terms of GB and further into TB along with the units for easy readability.
• OpManager: Notification Profile was not triggered when it was configured with ‘Select All’ option in criteria for IPSLA. This issue has now been fixed.
• OpManager: The option to enable/disable Traceroute from IPSLA Monitor snapshot page has been included now.
• OpManager: Path Details of the IPSLA Monitor was missing in the Alarm Message, for IPSLA specific alarms. This issue has been resolved now and the Path details have been appended to the IPSLA Monitor Name.
• OpManager: In the IPSLA Monitor snapshot page, all the alarms from the OpManager were shown under Alarms Tab. This has now been fixed and only the alarms specific to that particular IPSLA Monitor will be shown.
• OpManager: For IPSLA Monitor, inside snapshot page, Packet Loss history was shown for Source to Destination packets. This has been corrected and currently, the Destination To Source specific history will be shown.
• OpManager: Option to include IPSLA Monitor path details as Subject in Notification Mail has been included now.
• OpManager: The attempt to add IPSLA Monitor failed when a device returned invalid values such as 'NO SAA’. This has been fixed now.
• OpManager: For Hop By Hop View specific Graphs in widgets, the time frame value for which the data is shown has been provided.
• OpManager: Polling Interval value(in seconds) will be shown inside the summary details widget of IPSLA Monitor snapshot page.
• OpManager: In some cases, whenever OpManager service was restarted, false alerts were generated for all the https URLs. This issue has been fixed now.
• OpManager: If the configured dependency parent device was down for any device, then unnecessary alerts were raised in related to URL down for all URL’s configured under the device. This issue has now been fixed.
• OpManager: The Edit operation for Threshold was not getting saved for URL Monitors and MSSQL Monitors when the edit was tried from the Alarm page after selecting the specific URL Monitor alarm or MSSQL Monitor. This issue has now been fixed.
• OpManager: Event logs with event code as ‘0’ were not handled and ignored. This has been fixed now and such event logs will be received.
• OpManager: Users were able to associate Event Log rules to device from the snapshot page even without enabling event log monitoring. This has now been fixed.
• OpManager: Validation for Start and End Time fields was improper for ‘Run Archive’ option in the client. This issue has now been fixed.
• OpManager: Monitors were added as String Monitors by default while being added from Settings in the Performance Monitors page when the OID was manually copy-pasted into the OID field. This issue has now been fixed and it will be added as a Numeric type Monitor.
• OpManager: If there were no VM’s inside the HyperV Server then it was leading to HyperV Discovery failure. This issue has now been fixed.
• OpManager: If the process names fetched from the device had a space character in any specific Process Name, while using CLI for adding Process Monitors, the Process Name was not getting added to the device. This issue has now been fixed.
• OpManager: In the Central installation set up, the polling for HyperV monitors leads to invalid credentials failed alerts. This issue has now been fixed.
• OpManager: If any of the VM’s inside the HyperV Server contained more than 10 CPU instances, it was leading to HyperV discovery failure. This has now been fixed.
• OpManager: If any of the selected credentials(SNMP/WMI/CLI) for VM’s during VMware discovery had space characters in its name, it ignored all the selected credentials for the discovery of VMs. This issue has now been fixed.

Build No - 123194 - September 03, 2018

• OpManager: Recent Alarms are now displayed in the Device Snapshot page.
• OpManager: Alarm Suppression status is now displayed in the Device Snapshot page.
• OpManager: The user interface for reports has been improved and enhanced. The related issues have also been fixed.
• OpManager: OpManager now extends customization options to the login page. You can now choose to show/hide the copyrights and also change the background to an image of your choice.
• OpManager: Count of managed devices and interfaces will be displayed in the Probe details page.
• OpManager: In the ‘Probe Details’ page, edit option can be viewed by clicking on the probe name.
• OpManager: Alarm count has now been fixed in the Dashboard.
• OpManager: Device and alarm count of ‘Site snapshot’ widget in the Dashboard has been fixed.
• OpManager: Option to delete the probe has been moved inside the ‘Edit probe details’ page.
• OpManager: Previously, there were issues when probe details were edited after sorting. This has now been fixed.
• OpManager: Linux auto upgrade has been fixed.
• OpManager: Smart upgrade previously failed for directory names with spaces. This issue has been fixed now.
• OpManager: Smart upgrade previously failed when Central server was running in HTTPS and Probe was running in Command Prompt. This has been fixed now.
• OpManager: While fetching ‘deviceName’ instead of 'ipaddress’, trap was not received for a few devices. This issue can be fixed.
• OpManager: When deleting a device from probe, the related alarms were not deleted in Central. This issue has been fixed.
• OpManager: Previously, for traps with failure component not ending with "_trap", the related notification profile was not triggered. This issue has been fixed.
• OpManager: ‘OpManagerTrapNotification’ trap is now implemented in OPMANAGER-MIB.
• OpManager: In ‘TopoDBSpecialKey’ table, ‘category’ is empty when the default interface entry is missed. This issue has been fixed.
• OpManager: In alarm details page, ‘matched rule name’ has been included for Trap / EventLog / Syslog

Build No - 123193 - August 29, 2018

• NetFlow: Added options to Create, Modify, Delete access point groups.
• NetFlow: Snapshot reports in Inventory have been added for access point groups.
• NetFlow: Tooltip information added in the Settings page.
• NetFlow: In the dashboard, Inventory list, Inventory snapshot, Heat maps and license pages, the Interface status color code mismatch has been fixed and the status names have been changed.
• NetFlow: The 95th percentile line has been added to the Traffic graphs in the Snapshot page, Reports and exported PDF.
• NetFlow: The issue with enabling polling for NBAR configuration, when the first interface is disabled, has been fixed.

Build No - 123192 - August 27, 2018

• OpManager : Interface graphs can now scale automatically to Mbps and Gbps based on the data in XLS report.
• OpManager : Under ‘Devices in Business view’ widget, the ‘Device name’ column disappears while sorting the widget. This issue has been fixed.
• OpManager : SNMP Write community is now optional while adding SNMP v1/v2 credential. Retype password for SNMP v1/v2 has also been removed.
• OpManager : URL monitor and Service monitor options have been removed from the Switch and Router snapshot page.
• OpManager : Previously, Device template search results kept shuffling when any template from the result was edited or modified. This issue has been fixed.
• OpManager : Previously, Operator users were not able to edit the 'Availability outage reason’. This issue has been fixed.
• OpManager : Users can be able to view and hide the password while adding credentials.
• OpManager : Previously, there was an issue with rediscovering interfaces when the ‘IFDESCRIPTION’ was 'NULL’. This issue has been fixed.
• OpManager : Previously, there was an issue while associating device templates with devices. This has now been fixed.
• OpManager : While editing ‘Map’ widget, users can now choose between Google Maps or Zoho Maps.
• OpManager : Previously, option to change the position of the device label was missing in Business view. This issue has been fixed.
• General: OpManager/NetFlow now integrates with Zoho Maps and devices can be placed on the map according to the geographic distribution.

Build No - 123191 - August 22, 2018

• NCM: Comparing any two configuration files from anywhere within NCM is now through the ‘diff view’ page.
• NCM: The diff view page is now enhanced to show details like 'Annotation’, ‘Last Modified By’ and ‘Timestamp of configuration backup’
• NCM: Now, you can access ‘select’ boxes in the UI using focus, and also toggle them directly with the keyboard.
• NCM: While setting email for any notification/schedule in NCM, if the mail server settings is not pre-configured, a warning message will be displayed.
• NCM: Now, NCM supports 700 new models and we have updated the series and model data for a few existing devices.
• OpManager: The issue of Close icon not being shown in alarm details page has been fixed

Build No - 123190 - August 21, 2018

• General: PushNotification - Information about ManageEngine events will be published only for the selected countries.
• General: Password policies have been implemented as a fix for ‘Brute Force Attack’ vulnerability.
• General: In add/edit user page, ‘Username’ field has been added and the ‘Email-id’ field has been made mandatory.
• General: Now, resetting the Admin password can be done using ‘ResetPassword’ script. The previously used ‘ChangePassword’ API has been removed.
• General: Previously, in SMS settings, SMPP password was displayed as plain text. This has now been fixed.
• General : Previously, SMS notifications were not received via SMPP. This issue has now been fixed.
• General : Previously, SMS notifications via Serial modem was not working after upgrading OpManager to 123090. This issue has been fixed.
• General: Opt in ‘Breach notification’ support has been added to provide instant alerts along with relevant fixes when a data breach is detected.
• General: Cross site Scripting(XSS) vulnerability in login page has been fixed.
• General: Previously, in certain Linux machines, when embed widget link was generated, the URL contained “localhost” instead of the server name. This issue has now been fixed.
• OpManager: Previously, in SSH discovery, it was not possible to determine the device type from the welcome message after login. This issue has been fixed.
• OpManager: Terminal has been updated to open for all SSH monitoring machines. In case of NCM devices, NCM credential will be used; else OpManager’s CLI credential will be used.
• OpManager: Proper Encoding on sending syslog from Notification Profile has added.
• OpManager: In the ‘Time window’ page under Notification Profile, there were issues with overnight scheduling. This has been fixed.
• OpManager: After the upgrade, certain users were experiencing issues with the Add user functionality. This issue has now been fixed.

Build No - 123189 - August 17, 2018

• OpManager: You can now export a PDF with the chart option of your choice.
• OpManager: ‘Report Builder’ reports can now be saved with the chart option of your choice.
• OpManager: Support has been added to schedule reports with the selected chart option.
• OpManager: Under 'Report Builder’, MultipleNode monitors now have the respective instance/drives name with the deviceName in the legend.
• OpManager: Previously, there was an issue with creating Reports by selecting performance monitors. This has now been fixed.
• OpManager: While selecting ‘table’ view format in report builder, data was not being displayed. This issue has been fixed.
• OpManager: When exporting ‘snapshot performance monitor’ graph, the ‘table’ view overlapped with the graph. This has now been fixed.
• OpManager: In PDFs’ exported from interface report builder, some data was not displayed on the right side of the PDF. This has now been fixed.
• OpManager: In 'Reports’, it was not possible to create and choose a custom time window. This issue has been fixed.
• OpManager: ‘At a glance’ report displayed a few keys in the graph when it was scheduled (I18N Issue). This issue has now been fixed.
• OpManager: ‘Process monitor snapshot’ report displayed a key in the graph when the report was scheduled (I18N Issue). This has been fixed.
• OpManager: Previously, it was not possible to create a device report for custom time period. This issue has now been fixed.
• OpManager: Users were not able to view the full custom period in exported PDF’s. This issue has been fixed.
• OpManager: Previously, workflow was not triggered on threshold violation. This issue has been fixed.
• OpManager: Threshold monitors listed in the workflow was vague. Display name has also been added for clarity.
• OpManager: In Workflow, the traps criteria was not working properly. This has now been fixed.
• OpManager: When a special character is used in the 'Report Name’, the report was not being sent as an email while scheduling it. This issue has been fixed.
• OpManager: Facile support for SDP SSL Third party certificate & PFX certificate has now been added.
• OpManager: Standalone to Probe Migration Support for Storage Monitoring.

Build No - 123188 - August 13, 2018

• OpManager: Option to Add Custom WMI Monitor under Performance Monitor from Settings Page has been provided now, which can be later on associated to any template or device directly.
• OpManager: While configuring Notification Profile for the device, the user can now configure or append the Performance, AD, MSSQL, Exchange Monitor specific data like Monitor Name, Instance, and Protocol to a Subject and Message field of the Notification.
• OpManager: If Event Log Monitors are received in huge numbers from any device then it leads to delay and slow downs the data collection of event log monitors. Now it has been improved.
• OpManager: Hyper-V discovery was getting failed if duplication or change in DNS name of the server was found during discovery. This has been fixed now.
• OpManager: RAM usage values were not shown if the user selected the custom time period. This has been fixed now.
• OpManager: Due to the similarity in the sensor name with Multiple Instances, the Hardware monitoring specific alerts were being cleared inaccurately. This has been fixed now.
• OpManager: If the custom Monitors has the space character in the name field given by the user, then after adding it to the device, while trying to redirect to Graph page from Monitors list, it was getting redirected to device snapshot page. This has been fixed now.
• OpManager: Users can now enable/disable “Dynamic IP Address” option under System Settings.
• OpManager: Previously, data collection by CLI monitors failed when both the SNMP and CLI credential were passed via Network Discovery. This has now been fixed.
• OpManager: Previously, the ‘Unique System DisplayName’ criteria failed when we had multiple discovery profiles. This issue has now been fixed.

Build No - 123186 - October 10, 2018

• General : SQL Injection vulnerability in Global Search has been fixed.

Build No - 123185 - September 11, 2018

• General: SQL injection vulnerabilities in unauthenticated servlets has been fixed.
• OpUtils: Previously, there was an issue in sending alert mails from IP address manager. The issue has been fixed now.

Build No - 123184 - August 23, 2018

• OpManager: Close icon not shown in alarm details page issue has been fixed.

Build No - 123183 - August 7, 2018

• NetFlow: New widgets for Top N Device by Speed (as table, line graph, pie chart), has been added.
• NetFlow: The issue with Interface Traffic Graph in Custom Schedule Report has been fixed.
• NetFlow: SQL injection vulnerabilities in java APIs has been fixed.
• NetFlow: In End User tab, user data was vulnerable to XSS. This issue has been fixed.
• OpManager: The issue with Application Growth report has now been fixed.
• OpManager: The issue with the interface count mismatch in Dashboard has been fixed.

Build No - 123182 - August 2, 2018

• General : The issue of client loading failure in IE and Firefox older version has been fixed now.
• OpUtils: The Config File Manager tool, which helps to download/upload the StartUp and/or the Running config files of Cisco devices and also helps to compare different versions, has been brought back under inventory.
• OpUtils: The Config File Manager tool is enhanced with the capability of scheduling to take a backup of the config files from the Cisco devices at the specified interval.
• OpUtils: Audit Information for Add/Edit/Delete User Operations for IPAM, SPM & Rogue has been included.
• Firewall: When exporting Alarm Profile, the xml file didn’t contain other user created alarm profiles. Now this issues is fixed to show all profiles.
• Firewall: While importing syslog, the IP address of the device was updated with link local ip. Now the device will be added with local ip.
• Firewall: Device-rule configured firewall is listed as first resource in drop-down of configuration related Reports.
• Firewall: In policy overview page, drill-down on some of the services showed no data. This issue is now fixed
• Firewall: When we change credential profile while editing DeviceRule, it created another entry for the device. This issue is fixed.
• Firewall: SMS Setting was showing as ‘Not Configured’ when SMPP or SMS Gateway was configured already. This issue is fixed.
• Firewall: Unknown protocol drill-down report was showing sent and received as KB. But in actual, they are in bytes. The header is changed appropriately.
• Firewall: While editing the “Report-Profile” page, “Run on Week Days” was not selected. This issues is fixed now.
• Firewall: When a schedule was created for search report, it added as nullschedule. This issue is fixed now.
• Firewall: We were not showing executed report profiles details under “Device Detail” page. now the issue is fixed.
• Firewall: Sorting was not working in Raw search result page. It is fixed now.
• Firewall: While configuring Working-hour, range like (8-12,15-18,19,20,21) was not allowed. Now the issue is fixed.
• Firewall: Assigning Credential Profile without selecting a profile didn’t throw any error. This is fixed.
• Firewall: Not able to do raw search if only ‘Traffic Log’ was selected. It is fixed.
• Firewall: Page seems to refresh and go to different device after clicking “Save” in edit settings page of standards page. This is fixed
• Firewall: In Inventory snapshot page device edit slide comes over user settings page.This issues is now fixed.
• Firewall: ‘All device’ option for operator in Snapshot page has been removed.
• Firewall: Auto refresh will be done if any action is performed in collector list page.
• Firewall: Username search is not working in users list page under inventory. This issue is fixed
• Firewall: Icon-title is not shown properly on hover in alarms page. Now the title is shown properly.
• Firewall: Free-license text is removed from the DE Alert image
• Firewall: Support page icon was not working for Operator user. Now it is working

Build No - 123181 - August 1, 2018

• OpManager : Hardware Monitoring Support for Cisco Nexus and Checkpoint Firewall has been provided now.
• OpManager: Admin users can now enable or disable HTTPS under settings. SSL certificates (cer, crt, der, truststore, keystore, PFX) can be uploaded, verified and imported into OpManager to run in HTTPS mode.
• OpManager: Certificates of external services can now be added to the truststore by uploading them (in cer, crt, der, truststore, keystore, PFX formats) or can be fetched directly from the service’s URL.

Build No - 123180 - July 30, 2018

• OpManager now supports ManageEngine’s AlarmsOne integration.

Build No - 123179 - July 24, 2018

• General: Previously, the upgradation to build 123158 and above caused network interruptions in Windows 7 & 2008 R2. The issue is fixed now.

Build No - 123178 - July 24, 2018

• General : HSTS header has been introduced as an option that can be enabled to prevent SSL stripping.
• General : Unauthenticated Folder and File Access has been restricted and the vulnerability has been fixed.
• OpManager : In Notification Profile, if the device misses one poll and “notify when the alarm is cleared” criteria is selected, the ‘clear alarm’ alert that comes after trouble alarm (Attention-Trouble-Clear[THREE-POLL_CLEAR]) was not notified to user. This usability issue has been fixed now.
• OpManager : In Reports, for ‘Notification Profiles Triggered’ report, the message column displayed junk characters for a few MSSQL setups. This issue has been fixed now.
• OpManager : Users can now enable/disable OpManager Monitoring from within the UI.
• OpManager : We have done a minor change at the license level to differentiate OpManager & OpManagerPlus licenses. Hence, we recommend our OpManager Plus customers to upgrade to build number 123178 before applying any new licenses

Build No - 123177 - July 20, 2018

• Firewall: Added SSH protocol to fetch WatchGuard firewall configuration.
• Firewall: Local File Inclusion vulnerability is fixed.
• Firewall: SNMP based Live Report of PaloAlto devices was not working properly. This issue is fixed.
• Firewall: In Anomaly alert criteria page, a help message ‘CIDR and CSV formats are allowed’ has been added to Source and Destination fields…
• Firewall: When Report Profiles are created, removed unnecessary API call to improve UI performance.
• Firewall: In Cloud Services page of Inventory, ‘Add repository’ option is provided.
• Firewall: Device drill down from Policy Optimization page of Dashboard was not working. The issues is fixed and redirected to Optimization page.
• Firewall: In Firewall Live Traffic widget of Inventory page, when ‘Gbps’ is selected as unit, the values shown were not accurate. The issue is fixed to plot the graph with granular values.
• Firewall: Alarm Profile notification option ‘Run As Script’ didn’t accept arguments. The issue is fixed.
• Firewall: In Import Log page, Local Schedule option was not shown even when the client can be accessed from localhost. This issue is fixed now.
• Firewall: In Fortigate syslog, VPN close log has duplicate entry which led to incorrect data. Handled it to fix the issue.
• Firewall: Traffic Trend Report graph was not plotted in order. This issue is fixed.
• Firewall: Syslog port details were not shown properly in Device Details Page of Settings tab. The issue is fixed
• Firewall: When a PaloAlto Rule Name contains ‘index’ value, wrong unused rule list is displayed. The issue is fixed.
• Firewall: Checkpoint VPN log parsing issue is fixed.
• Firewall: In MSSQL setup, Yearly tables were not dropped properly. The issue is fixed
• Firewall: When extra device license was applied in the product, the manage and unmanage actions couldn’t be performed till user restarts the product. This issue is fixed.
• Firewall: Header of SMS notification in Alert Profile page changed from ‘Send Email based SMS’ to ‘Send SMS’ to avoid misunderstanding.
• Firewall: In the Report Profile Notification page, a message “Use comma ‘,’ separator for multiple mail ids” has been added for clear understanding.
• Firewall: Edit and Save Report Profile action returned wrong status message. The issue is fixed to show proper status message.
• Firewall: While saving Compliance Report Schedule, there was no status message. This issue is fixed to show the status message.
• NCM: EOL/EOS data is now updated from local database.
• NCM: Now you can discover devices in single step.
• NCM: XML External Entity vulnerability security patch is released.
• NCM: SNMP profile is now unified and can be accessed in single place.
• NCM: Now you can request for latest EOL/EOS data with NCM support from product.
• NCM: Now you can update SysOID for multiple devices in single shot.

Build No - 123176 - July 18, 2018

• General: Previously, Audit report was not working in NFA and NCM. This issue has been fixed.
• Netflow: Security Patch to handle Zip Slip Attack.

Build No - 123175 - July 13, 2018

• OpManager: Previously, the password field for the getProcessesForWorkflow API was exposed. This issue has now been fixed.
• OpManager: Exclude Days option provided in Reports and Schedule Reports.
• OpManager: Inside Availability and Response Reports page, for ‘URLs Availability’ report the URL Name field was left blank without any value. This has been fixed now.
• OpManager: Previously, OpManager agent was vulnerable due to Zip Slip Attack. This has been handled now.

Build No - 123169 - July 11, 2018

• General: Cross site scripting(XSS) and arbitrary file read vulnerability in Fail Over has been fixed. [CVE-2018-12997, CVE-2018-12998]
• NetFlow: Data encryption has been provided for attachments in 'Schedule Report Mail’.
• NetFlow: Under DNS Settings, the issue with Cross-site Scripting (XSS) on DNS Name has been fixed.
• NCM: Security Patch to handle Zip Slip Attack.
• NCM: Security Patch to handle Local File Inclusion Attack.

Build No - 123168 - July 6, 2018

• OpManager: Previously, the IPSLA monitor was not getting deleted for OpManger running with MSSQL DB. This has been fixed now.
• OpManager: OpManager will now fetch the device serial number and software version using SNMP based on the device type configured in HardwareInfo.xml (conf\OpManager).
• OpManager: Under System Settings page, a filter option has been provided in Interface discovery for single device additions.
• OpManager: Audit logs will now be recorded whenever a user:
• creates a custom category.
• deletes a custom category.
• OpManager: Dial enabling issue has been fixed for all the monitors.
• OpManager: Previously, Data collection failed for String monitors with StringToNumeric expression. This issue has been fixed.
• OpManager: Users can now choose the uplink dependency for devices in Layer2Discovery.
• OpManager: Previously, in non-monitored state, device availability status was displayed as ‘UP’ instead of 'Not Monitored’. This has been fixed.
• OpManager: Previously sorting of columns inside widgets of Virtual Servers snapshots was not working properly as expected. This has been fixed now.
• OpManager: While adding Process Template, the displayName of the process was getting updated same as Name parameter. This has been fixed now.
• OpManager: Previously sorting of columns inside Monitoring page from Settings was not working properly as expected for all types of monitors. This has been fixed now.
• OpManager: While configuring File/Folder monitors, sometimes, the same monitor was getting added more than once. This has been fixed now.
• OpManager: While performing edit operation, field validations was not done for Non-Numerical values of Threshold and Rearm values for Performance Monitors from Settings page.

Build No - 123167 - July 5, 2018

• General: Database migration from MSSQL to PostgreSQL has been implemented.
• General: Previously, it was mandatory to configure Mail server settings before configuring Notification Profile. This has now been modified to allow direct configuration of other notification services.
• General: Previously, after clicking on the DNS tab in System Settings page, content for the other tabs did not load. This issue has been fixed.
• General: In Server settings page, the ‘Cancel’ button was unresponsive. This issue has been fixed.
• General: The Dashboard action button was unresponsive for local operator user. This issue has been fixed.
• General: Previously, there was a UI issue in the global search bar when a set of operations was performed by Read Only user. This issue has been fixed.
• OpManager: ZipSlip Vulnerability issue has been fixed.
• OpManager: Support Information File (SIF) can be accessed only by admin user through API calls.
• OpManager: EncryptPassword.bat has been removed due to DOS attack.

Build No - 123166 - July 3, 2018

• OpManager: Previously, when ‘Process Monitor’ report was exported as a PDF, data was not displayed even when it was available in the UI. This issue has been fixed.
• OpManager: ‘Date’ variable has been introduced in the 'Workflow’.
• OpManager: Previously, under 'Schedule Reports’, the time period was displayed incorrectly in a few reports. This issue has been fixed.
• OpManager: In the Snapshot page, visibility of ‘Schedule This’ option has been restricted hidden for operator users.
• OpManager: Previously, in some rare cases, it was not possible to copy workflow. This issue has been fixed.
• OpManager: Previously, under ‘Schedule This’ option, weekly/monthly UI elements were displayed incorrectly for different options. This issue has been fixed.
• OpManager: ‘Execute Template’ workflow task failed to work. This issue has been fixed

Build No - 123165 - July 2, 2018

• OpManager: Previously, unauthenticated users were able to access the device’s custom icons in businessview. This issue has now been fixed.
• OpManager: Previously, empty floors were visible to the operator user. This issue has now been fixed.
• OpManager: Previously, empty racks were visible to the operator user. This issue has now been fixed.
• OpManager: Floors with racks to which operator users have no accessible devices will not be displayed.
• OpManager: Racks with devices to which operator users have no access will not be displayed.
• OpManager: Previously, in Business views under Maps, the device icon was unresponsive. This issue has been fixed.

Build No - 123164 - June 29, 2018

• Firewall: A new device ‘MicroTik’ is now supported.

• Firewall: Simulate firewall logs - You can simulate firewall logs for different vendors to check all the reports in Firewall Analyzer. Log simulation is available for Fortigate, PaloAlto, CheckPoint, Juniper SRX and Squid Proxy devices.

• Firewall: Added more than 3000 websites to the Cloud Repository.

• Firewall: Option to plot Dashboard Live traffic graph in ‘Kbps/Mbps/Gbps’ is available.

• Firewall: Support ID: 4598454 - Updated IP to Country database.

• Firewall: Support ID: 4573349 - When you import syslog, you can map the logs to the existing device.

• Firewall: Support ID: 4590527 - Export to CSV format option is available for expanded view of all ‘Inventory’ page widgets.

• Firewall: ‘Admin Report’ for PaloAlto available. It covers details of user login, log out, and commands executed.

• Firewall: Auto refresh option provide to ‘Live Syslog Viewer’ page.

• Firewall: Mail content format enhanced for scheduled ‘Standards’ report.

• Firewall: More tabs are added in Device inventory snapshot page for better access.

• Firewall: License count, number of managed devices and remaining devices count now available under ' License Management’ page.

• Firewall: Now ‘bps’ value is formatted to readable format in Bandwidth Alert mail content.

• Firewall: Support ID: 4588018 - While creating Alarm profile, configuring more than 50 criteria makes the page unresponsive. This issue is now fixed.

• Firewall: Refresh option in ‘Dashboard Live Traffic’ widget was not working. Now the issue is resolved.

• Firewall: AD User-IP Mapping had two entry for an user with Old and New IP. The duplication issue is rectified now.

• Firewall: Support ID: 4579510 - Incorrect Rule Name was shown for Zyxel firewall. This issue is now fixed.

• Firewall: Support ID: 4480507 - Invalid Byte Sequence Error while loading FirewallRecords table is fixed.

• Firewall: While parsing Sonicwall configuration, network objects with IP-range and IPv6 objects were not handled properly. It is fixed now.

• Firewall: Finding ‘Unused Objects’ from configuration file had discrepancy. Now it is rectified.

• Firewall: In Japanese Installation, when logs are imported, reports were generated for current time instead of log time. This issue is resolved.

• Firewall: ‘Edit Interface’ & ‘Edit Interface Names’ were not working, when edited for the second time. This issue is now fixed.

• Firewall: Occasionally, the ‘Inventory’ page became empty when ‘Back’ icon was clicked. This issue is now resolved.

• Firewall: Even after changing display name of Firewall, ' Resource Name’ was displayed when user was added from User Management page. Now the issue is fixed to show the device list with display name while assigning device.

• Firewall: When Credential Profile was edited, the ‘Email’ field became empty. Now the issue is fixed to show the given Email Id in that field.

Build No - 123163 - June 27, 2018

• NetFlow: Option for IP group bulk-upload between sites is added.
• NetFlow: NetFlow supports Resolve DNS option in Report profile.
• NetFlow: NetFlow now provides detailed report for AS View.
• NetFlow: The issue with data mismatch for devices in Inventory and Map module has been fixed.
• NetFlow: The issue with the interface count mismatch has been fixed.

Build No - 123162 - June 25, 2018

• General: A new icon has been introduced in the top right corner of the product’s header which contain links to the respective product’s training videos.
• OpManager: Option to bulk Deletion of File, Folder, Process, Service, WindowsService and URL Monitors from Device snapshot pages has been included now.
• OpManager: Previously, the Active Processes and Installed Software data was pulled from device only if SNMP Protocol was passed. Now the data will be pulled also for the device associated only with WMI Credential.
• OpManager: Previously, the password of the device was visible in the URL if ListActiveWindowsServices Api was invoked. This has been fixed now.
• OpManager: The encryption level of device password credentials has been increased.
• OpManager: Previously, when a Business View Administrator user was trying to view the Graphs from Device Snapshot -> Monitors page, it was redirecting to blank page. This has been handled now.
• OpManager: While associating monitors from Settings -> Performance Monitors page, the threshold values were not getting updated to the device. This has been fixed now.
• OpManager: In Probe set up, the test credential for VMware/Xen and UCS devices was not working due to incorrect parameter. This has been fixed now.
• OpManager: Previous, Proper validation was not done for Monitoring interval field for all the monitors. This has been handled and validation check has been included now limiting the monitoring interval max value to 24 hours.
• OpManager: Audit logs were not shown in device snapshot for Process Templates association details. This has been fixed now.
• OpManager: Previously, WMI protocol based Process monitors were shown in Linux installation inside process templates, leading to incorrect association of those monitors and unnecessarily slowing down of data collection. This has been handled now and those invalid monitors will not be shown.
• OpManager: Sometimes, creation of raw stats data table was getting stopped and was leading to data collection failure. This has been handled now.
• OpManager: Previously, VMware discovery was getting failed if, for any datastore mount location value was not received from API. This has been fixed now.
• OpManager: Language Localisation of the Sensor Status was not done under Hardware Monitoring for Chinese Language. This has been done now.
• OpManager: Language Localisation for the 1Month field inside graph was not done for Chinese/Japanese Language. This has been done now.

Build No - 123161 - June 21, 2018

• OpManager: Previously, users with “Operator Permission” were able to Create/ Delete URLs. This issue has now been fixed.
• OpManager: Previously, users with “Operator Permission” were able to access the URL Snapshot page by using the page’s link copied from the address bar of the “Administrator” profile. This issue has now been fixed.
• OpManager: Previously, users with “Operator Permission” were able to create business views. This issue has now been fixed.
• OpManager: Previously, users with “Operator Permission” were able to access the ‘getSociallTPostDetails’ API. This issue has now been fixed.
• OpManager: Previously, Custom link content was vulnerable to Cross-Site Scripting (XSS). This issue has now been fixed.
• OpManager: Previously, the password field for the QueryDeviceForSysOID API was exposed. This issue has now been fixed.
• OpManager: Previously, Import Device Template was vulnerable to Cross-Site Scripting (XSS). This issue has now been fixed.
• OpManager: LFI vulnerability while uploading device custom icon in businessview is fixed now.
• OpManager: While exporting the ‘Interface Bandwidth’ report in PDF format, the date and time values were displayed incorrectly. This issue has been fixed.
• OpManager: Previously, VLAN and Configure Interface option was displayed twice for networking devices. This issue has been fixed.
• OpManager: Previously, data displayed in the ‘Last polled bandwidth utilization’ widget was incorrect in NOC view. This issue has been fixed.
• OpManager: Previously, under Inventory, while using the Filter by severity option for Interface and URLs, there was a count mismatch issue. This issue has been fixed.
• OpManager: Previously, under Inventory, the User had to click twice to view the Device/Interface snapshot pages. Now, the short summary page has been removed and a single click will take the User to the snapshot pages.
• OpManager: Previously, under Device Template, there were issues while selecting multiple monitors during addition. This issue has been fixed.

Build No - 123160 - June 19, 2018

• OpManager: The RemodeCodeExecution(RCE) vulnerability occurring while testing scripts has been fixed (Reported by Pulse Security).

• OpManager: Path Traversal vulnerability in uploadMib API has been fixed (Reported by Pulse Security).

• OpManager: Unauthorized access for uploadMib API has been restricted. It can be accessed only by users with admin privileges.

• OpManager: Previously, any type of input was accepted in UpdateDeviceDetails API’s parameter. This issue has been fixed (Reported by Pulse Security).

• OpManager: Previously, OpManager files could be changed or modified by exploiting LFI vulnerability in uploadBusinessViewBG, importDeviceTemplate API. This issue has been fixed.

Build No - 123159 - June 18, 2018

• NCM: Export the devices listed in device inventory page as PDF.
• NCM: A device group that is listed as a sub group in another device group cannot be deleted.
• NCM: Issue of database backup and restore failure after importing new device template is now fixed.
• NCM: Issue of upgrade failure due to ncm personality-configuration is now fixed.
• NetFlow: NetFlow now Supports remote PostgreSQL database.

Build No - 123158 - June 14, 2018

• OpUtils : Under Inventory, the UI of MAC, IP address and DNS is improved in the ports section by making multiple addresses now visible in a separate slide window when “more…” is clicked.
• OpUtils : In the Switch snapshot page under Inventory, the UI of MAC, IP address and DNS is improved in the ports section by making multiple addresses now visible in a separate slide window when “more…” is clicked.
• OpUtils : Under privacy settings, Personally Identifiable Information(PII) search and update has been implemented. (PII Search helps identify the PII Details given by the user across various modules. The PII data can also be updated as anonymous to maintain privacy).

Build No - 123157 - June 14, 2018

• OpManager : The SQL injection vulnerability in “FailOverHelperServlet” for the operation ‘standbyprobestatus’ has been fixed (CVE-2018-9087, CVE-2018-9089).
• OpManager : The SQL injection vulnerability in “FailOverHelperServlet” for the operation ‘getprobenetworkshare’ has been fixed (CVE-2018-9088).
• 4692934 - The “Integration User” option under ‘User Management’ has been removed.
• OpManager: The Interface discovery timeout which was by default set to 5 seconds, will now fetch the timeout value from the SNMP credential.
• OpManager: Users can now configure the number of parallel threads for Trap discovery in “threads.conf”
• OpManager: Discovery delay has been introduced for Trap based discovery and the default interval has been set to 20 seconds. The user can configure this delay and set a custom interval in "discovery.properties".
• OpManager: Discovery debug prints have now been introduced for the purpose of troubleshooting.
• OpManager: Previously, the SNMPV3 EngineID request was queried only once with a timeout of 5 seconds. Now, the timeout and retries count will be fetched from the credential.
• OpManager: Previously, devices running the latest build of Windows 10 was being discovered and classified as Windows 8. This issue has been fixed.
• OpManager: Audit logs will now be recorded whenever a user
  • modifies the name of the Business view
  • modifies the name of the Floor view
  • modifies the name of the Rack view
• OpManager: Process names printed in the “Discovery logs” have been modified as “Debug prints” and names with “.exe” have been removed.
• OpManager: Previously, the Palo Alto device templates were set with the wrong vendor 'APC’. This has now been updated as 'Palo Alto Networks’.
• OpManager: Previously, the Interface name and Alias had garbled characters during discovery, when the OS and OpManager had French as the primary language. This issue has now been fixed.
• OpManager: Additional SysObjectIDs have been added for the below device template types,
  • Cisco catalyst296024LT
  • Cisco 891
  • Cisco MDS 9148

Build No - 123156 - June 13, 2018

• General: License Agreement has been updated.

• General: Promotions related to ITOM Events will be displayed in the UI header after login.

• OpManager : Enabling proxy settings blocked APM-Plugin communication. Users were unable to login to the plugin and experienced issues with syncing OPM. This has been handled now.

• OpManager : Unable to discover vCenter if proxy settings were enabled in OpManager. Now this has been handled.

• OpManager : Disabling proxy settings from client did not take effect directly, and required a server restart. This issue has been fixed.

Build No - 123150 - June 7, 2018

• OpManager: Audit Information/Logs for Add/Edit/Delete/Associate Operations for URL Monitor has been included.
• OpManager: Audit Information/Logs for Add/Edit/Delete User Operations for APM Plugin has been included.
• OpManager: Previously, it was not possible to perform actions like Clear/Delete/Acknowledge for URL based alarm from url snapshot page, alarms view. The mentioned options have been included now.
• OpManager: Previously, WMI Credential test for device discovered as Unknown was not possible. This has been fixed now.
• OpManager: If both HyperV and WMI devices were being monitored then inside Protocol based Inventory view, the number of devices count was shown incorrectly if VIWMI protocol was chosen. This has been fixed now.
• OpManager: Even though vCenter was UnManaged, the VMware Events based alarms were getting raised. This has been fixed now.
• OpManager: The field validation for alarm message of threshold violation was not done for Performance monitor, leading to inappropriate confirmation message to user of monitor being saved. This has been fixed now.
• OpManager: Once the URL Response Time based only alarm is cleared or deleted, the status of URL monitor is still not updated to Clear. This has been fixed now.
• OpManager: With APM Plugin of version 13730 and above, an inappropriate alert is shown to the user asking to upgrade to the latest version of APM Plugin. This has been fixed now.
• OpManager: The field validation for Threshold parameters was not done for MSSQL Monitors. This has been fixed now.

Build No - 123149 - June 6, 2018

• OpManager: Quicklinks to How-to, Technical videos, and FAQs has been introduced in OpManager to help users easily configure settings and to troubleshoot commonly faced issues.

• OpUtils : Previously under Dashboard, the edit option in “IP Availability Summary HeatMap” widget only had a drop down list of IP’s without their subnet mask. The issue is fixed now by listing IP addresses with their subnet masks.

• OpUtils : Previously under Inventory, the edit option in IP address field does not mention the IP Address that is being edited. The issue is fixed now by making the selected IP visible as a header.

• OpUtils : Previously under Inventory, the DHCP option shows an empty page when there is no data. The issue is fixed now as it shows sample data which disappears automatically once data is added.

• OpUtils : Under Ports page of Inventory, five options such as “Modify IfAlias” , “Administratively Disable Interfaces” , “Administratively Enable Interfaces” , "Exclude Port(s)", and "Include Port(s)" were made available. These actions were not available for the ports listed in switch snapshot page. The issue is fixed now.

• OpUtils : Previously under Inventory, the grid is not updated automatically after editing the IP address. The issue is fixed now.

• OpUtils : Under tools, there was an issue in the working of Trace Route when resolving the DNS name. This issue is fixed now.

Build No - 123148 - June 1, 2018

• OpManager: Previously, while configuring ‘Send Email’ in Workflow, the ‘HTML’ mail format option was not working. This has now been fixed.
• OpManager: Previously, the option to edit the display name of the IP SLA monitor was unavailable. This option has now been provided.
• OpManager: In Probe/Central set up, IP Address field was displayed incorrectly with the probe ID appended at the end. This issue has been fixed.
• OpManager: “Custom Dials” option has now been added for UCS devices.
• OpManager: Previously, while adding IP SLA Monitor, a proper Field Validation for the Name field was missing. This issue has been fixed.
• OpManager: Previously, redirection to the “VoIP Monitor Snapshot” page using the “Top Call Performance by location” widget was not successful. This issue has now been fixed.
• OpManager: Previously, clicking the IP SLA Monitor link in the Business View did not redirect the User to the respective Monitor/List page. This issue has now been fixed.
• OpManager: WAN RTT Monitor and VoIP Monitor Widgets were missing from the source device of the IP SLA. This has now been included.
• OpManager: Previously, the time period for which the reports were displayed was not shown in the IP SLA Widgets. This has now been included.
• OpManager: For IP SLA Reports, Widgets and Snapshots, the display name of the destination device will be shown instead of its IP Address.
• OpManager: Previously, “Operator” user was not restricted from viewing the URL monitors in the Inventory Page. This issue has been fixed.
• OpManager: Previously, “Operator” user was not restricted from being able to modify the background color and the tile color in the 3D floor view page. This issue has been fixed.
• OpManager: In Group Chat Module, “Operator” user was not restricted from viewing the list of users, their User ID and Email addresses. This issue has been fixed.
• OpManager: In Group Chat Module, the “Delete Post” and “Delete Comment” API was vulnerable to SQL Injection. This issue has been fixed

Build No - 123147 - May 31, 2018

• General: Data encryption has been provided for attachments in 'Schedule Report Mail’.

• OpManager: Spreadsheet format has been updated from XLS to XLSX across the product.

• OpManager: A disclaimer text concerning privacy has been added in exported PDFs and spreadsheets. This can be disabled/enabled in the system settings page.

• OpManager: Alert/Event message showing garbled values has been fixed.

• OpManager: In discovery, it was possible to import CSV files that contained HTML content. This issue is now fixed.

• OpManager: Previously under ‘Additional Fields’ in ‘Configuration’ module, it was possible to import CSV files that contained HTML content. This issue is handled now.

• OpManager: In the Group Chat module, getSocialITPost details API was prone to SQL Injection vulnerability with “postID” parameter. This issue is fixed.

• OpManager: Path traversal issue in Group Chat module affecting local drive folders is fixed.

Build No - 123137 - May 25, 2018

• General: Dashboards are now user-specific and allows users to create their own private dashboards. Apart from this, users with administrator privilege can associate dashboards that are created by them with select users.

• NCM: Network Configuration Manager is now GDPR compliant with the privacy messages and consent requests displayed in the UI.

• NCM: Increased privacy & security through product enhancements.

• NCM: Custom column names now populate uniformly throughout the UI after a change.

• NCM: More user-friendly with editable Configlet names.

• NetFlow: Distributed Edition for latest version has been released.

• NetFlow: NetFlow Analyzer is now GDPR compliant with consent requests displayed across various modules in the UI.

• NetFlow: Under privacy settings, Personally Identifiable Information (PII) search and update options have been added. (PII Search helps identify the PII Details given by the user across various modules. The PII data can also be updated as anonymous to maintain privacy.)

• NetFlow: A step by step guide on How to use NetFlow Analyzer has been added.

• NetFlow: Resolve DNS handled for Conversation widget in Device snapshot.

• NetFlow: The issue with the wrong granularity values being displayed in Device snapshot page has been fixed.

• NetFlow: Search report and Global search report options have been combined together under Search Report.

• Firewall Analyzer: Introduced ‘Audit Report’ for all add, delete, and update actions done by Firewall Analyzer user. All the user actions are logged.

• Firewall Analyzer: Option to search personal information like Email, phone number and user name across the product and replace them with another user is available under 'Privacy Settings’.

• Firewall Analyzer: ‘Security Audit Report’ is now available in PDF format. You can export the report in PDF format from client.

• Firewall Analyzer: Disclaimer added in exported PDF & CSV to convey availability of Personally Identifiable Information (PII) of GDPR.

• Firewall Analyzer: Option to add new Custom Report was not visible in UI. Now the issue is fixed.

Build No - 123136 - May 22, 2018

• General: Previously, Chinese characters sent as parameter in API were saved as garbled characters. This issue has been fixed.

• General: Live chat support has been integrated in OpManager.

• General: System Performance status icon has been removed from the header in OpManager.

• General: Previously, “Arithmetic Exception” error was thrown during a fresh start of OpManager. This has now been fixed.

• General: Triggering an API call for creating a dashboard without choosing any widget is restricted to the web client.

• General: In edit widget page, same value cannot be given in two different criteria. This has been fixed.

• General: Updating a widget without widget name has been fixed.

• General:Previously, when adding the first domain, it was not listed in the Windows Domain until the page was reloaded. This issue has been fixed.

• General: In global search, NCM-Compliance was not redirecting and the Subnets results were not listed. This issue has been fixed.

• General: In global search, showing of undefined value in add-on details from search suggestion has been fixed.

• General: In global search, Device notes were not listed out in the search if the list count is more than 10. This issue has been fixed.

• General: Previously, PostgreSQL to MSSQL migration kept failing due to mismatch of datatype in ‘Alert’ table and ‘Event’ table. This issue has been fixed.

• General: License expiry alert mail will be sent with an interval of 5 days between each reminder for the last 15 days and the final remainder will be sent a day before the license expires.

• General: UI Notification displaying license expiry duration in the header has been limited to the last 30 days.

• OpManager: Option to export and download ‘Availability Statistics’ as PDF and XLS is provided for all monitors including Windows Service Monitors, Service Monitors, Exchange Service Monitors, AD Service Monitors, MSSQL Service Monitors and Process Monitors.

• OpManager: Option has been added to view ‘Real Time Monitor Graphs’ for all the Performance monitors that are available as Dials inside snapshot page.

• OpManager: Saving the Hardware Monitor specific settings was prone to SQL Injection vulnerability. This has been fixed now.

• OpManager: For Process and Service Monitors snapshot page, the selection of Custom Time Period didn’t have any effect and used to show the same details based on previously selected time period. This has been fixed now.

• OpManager: Previously, when WMI credential used for monitoring WMI device had space character in its password, the monitored device was experiencing account lock out issue. This has been fixed now.

• OpManager: Previously, File/Folder monitoring was not generating alerts even if the file was modified, especially in cases where the monitored device machine had different date formats. This has been fixed now.

• OpManager: In Event Log Monitoring, if the configured message field had ‘tab space’ character, the generated event log message was not displayed properly. This has been fixed now.

• OpManager: Previously, Performance monitors’ XLS reports were generated with garbled characters for non-english languages. This has been fixed now.

• OpManager: While configuring Event Log Monitors, field validation for Event ID field was not done. This has been fixed now.

• OpManager: Unit for monitors were not shown for File/Folder graphs’ tabular view. This has been fixed now.

• OpManager: Language localization for ‘Edit Discovery Profile’ and ‘Never Suppress Alarm’ operation specific keys were incorrectly updated for Japanese language. This has been properly updated now.

• OpManager: Under Inventory Reports, for ‘Threshold Details of Devices’ report, VMware & HyperV specific Monitors’ threshold details were not listed. This has been fixed now.

• OpManager: Previously, RuleEngine Re-Run or discovery/rediscovery of device was not getting updated for MSSQL Monitors, even though they were configured in RuleEngine Actions. This issue has been fixed.

• OpManager: While mapping IP to VirtualMachines from vCenter/ESXServer/HyperV/Xen Servers snapshot pages, only IP was allowed previously. Now hostname is also allowed.

• OpManager: Previously, if an incorrect parameter value for Protocol was passed for updateProcessTemplateDetails API, proper error was not thrown. This has been handled now.

• OpManager: In Monitors Tab under Snapshot Page, columns were not being sorted as per data type. This issue has been fixed now.

• OpManager: In ‘Notification Profile’ message box, language localization value for Chinese language has been updated for the message property.

• OpManager: In Add/Edit File Monitor under Settings page, language localization value for Japanese language has been updated.

• OpManager: OpManager agent was getting crashed due to memory leak in the agent while reading the registry data for monitoring. This has been fixed now.

• OpManager: In Performance Monitor Graph page, “Last month” time period option has been added.

• OpManager: In the device snapshot page, PDF option for Single monitor graph page was not working properly. This issue has been fixed.

• OpManager: Test URL option from URL snapshot page failed after the first try. This issue has been fixed.

• OpManager: Previously, users were able to select/deselect the listed Event Log rules while associating it to device from snapshot page even without enabling Event Log Monitor Interval. This has now been fixed.

• OpManager: Windows Services from device were not retrived while configuring Workflow with Restart Service action if device credential had special characters. This has been fixed now.

• OpManager: Unauthorized SIF Activity (Support Information File) has been restricted and can be accessed only using the admin account.

• OpManager: Notification Profile severities will not over write Device Misses 1/3/5 Polls profile Criteria selection any more.

• OpManager: ‘+’ symbol in the beginning of EMail-Id for Mail Server Settings and Notification Profile is supported now.

• OpManager: Previously, Command results of Run Program/System Command Notification Profile appended to alert message were not properly shown. This issue has been fixed.

• OpManager: Run Program/System Command Notification profile’s message variables given in next line are not taken as arguments while executing commands on notification profile trigger. This issue has been fixed.

• OpManager: In Settings page, ’Mobile number’ was shown even after deleting the App SMS settings. This has been fixed.

• OpManager: Previously, trying to uninstall OpManager Central failed with an error popup. This has now been fixed.

• OpManager: Previously, installing standby OpManager with invalid credentials of primary OpManager resulted in the setup getting installed as Standalone OpManager with PGSQL backend. This has now been fixed.

• OpManager: Previously, installing OpManager with MSSQL DB as backend by providing existing database name resulted in the setup getting installed with PGSQL backend. This has now been fixed.

• OpManager: Previously, in Alarm escalation rule, entering multiple mobile numbers, each separated by a comma was not possible. This option has been added.

• OpManager: SSH Discovery will fetch the DeviceType from login message based on availability.

• OpManager: In reports, the ‘Server Health Report monitors’ name i18n has been updated now.

• OpManager: Users can now select multiple SNMP trap processors and delete them in bulk using the 'multiple delete option’.

• OpManager: Search option for SNMP trap processor is now enabled where the user can search trap processors based on either name or OID.

• OpManager: Multiple delete option is now enabled for unsolicited traps, where the user can select more than one trap and delete them.

• OpManager: Search option for Unsolicited traps is now enabled.

• OpManager: A new option is provided in the widget Edit page to enable and disable the Widget Dials.

• OpManager: Previously, while adding a rule in Rule Engine, ‘criteria’ drop down field was not populated correctly. This issue has been fixed.

• OpUtils : The Bandwidth monitoring tool, which measures the network traffic utilization/bandwidth usage both at the interface level and at the device level, has been brought back under inventory.

• OpUtils : The Bandwidth monitoring tool is enhanced with the capability of generating alerts based on the configured threshold violation and the same can be notify through email.

• OpUtils : Previously under Oputils option, the SPM General settings could not be saved. This issue is fixed now.

• OpUtils : Previously under Inventory, the option to edit a switch in Switch Port Papper was not working. This issue is fixed now.

• OpUtils : In the Network Scanner page under Settings, when deleting multiple IP Address(es) after selecting them, an error message was thrown saying “Nothing is selected to delete”. This issue has been fixed and multiple IP address(es) can be batch deleted.

• OpUtils : Under ’Short Summary’ page in Inventory, ’Subnet summary’, ’IP summary’, ’Switch summary’ title was displayed . This has been removed.

• OpUtils : The ‘Device Type Summary’ widget in Dashboard has been renamed to ‘OS Type Summary’ as it represents the OS type installed in the device.

• OpUtils : Constraints have been added to check if the ‘Custom column’ name is numeric. An error message will be displayed stating “ Invalid Custom Name ” in case the name is numeric.

• OpUtils : In the MAC Address Resolver page under Setting tools tab, ‘IP to MAC’ and ‘MAC to IP’ were displayed in two different lines due to a minor UI alignment issue. This has now been fixed.

• OpUtils : In the Credentials page under SPM in settings, editing an existing credential redirected the page to Discovery’s Edit credential page. This issue has been fixed.

• OpUtils : Under Basic settings, Database Maintenance option has been removed for OpUtils installation.

• OpUtils : In the Scope page for DHCP under Inventory, the ‘Scope State’ column in the table contains two values - ‘Enabled’ and ‘Disabled’ . The ‘Disabled’ option will now be highlighted in red color.

• OpUtils : In the ‘OS Type Summary’ widget ( previously called ‘Device Type Summary’ ), the “%” symbol was not displayed in the value when hovering the mouse over it. This issue has been fixed.

• OpUtils : The SNMP graph tool, which is used to gather real time data and generates a graph for any SNMP IP node, has been brought back under SNMP tools of OpUtils settings.

• OpUtils : The SNMP graph tool is enhanced with the capability of providing the MIB node information like OID, syntax, description and MIB node properties.

Build No - 123127 - May 14, 2018

• OpManager : Inbuilt Storage Monitoring support has been added.

Build No - 123126 - May 8, 2018

Firewall Analyzer: Admin Server

• Firewall Analyzer: Enterprise edition for 12.3 version
• Firewall Analyzer: Data Migration tool for enterprise edition 8.5 customers to upgrade to 12.3

Firewall Analyzer: Standalone/Collector Server

• Firewall Analyzer: Compliance reports and Policy/Rule Management support for WatchGuard device
• Firewall Analyzer: Compliance reports and Policy/Rule Management support for SonicWALL device.
• Firewall Analyzer: Policy/Rule re-order report for PaloAlto device

Build No - 123125 - May 8, 2018

• OpManager: In Mail Server settings, Authentication Details which was mandatory (from 123108) has been made optional.

• OpManager: Previously, the selected dashboard view was not being highlighted. This issue has been fixed.

• OpManager: When OpManager server rebooted, OpManager service failed to start displaying the error “Unable to start PgSql DB” This has been fixed now.

• OpManager: Consent Implementation has been enforced for various modules.

• OpManager: Under privacy settings, Personally Identifiable Information(PII) search and update has been implemented. (PII Search helps identify the PII Details given by the user across various modules. The PII data can also be updated as anonymous to maintain privacy)

• OpManager: Audit logs will now be recorded whenever a user

• • adds or deletes additional fields.
  • rediscovers a device.
  • uploads a Google Map html file.
  • deletes a device from Google Map.
  • creates or deletes Business views, 3D Floor views and Rack views.
  • creates/modifies/deletes a Discovery Profile.
  • creates or deletes a group in Group chat.

• General: Chrome’s latest update(66.0.3359.139) caused OpManager to crash when navigating to any graph pages. This issue has been fixed by updating zoho charts from version 1.0.5 to 1.0.8.

Build No - 123124 - May 3, 2018

• OpManager: Option to copy and modify the Business View (Copy As option) has been added.
• OpManager: Previously, Zoom in/out feature was missing in Business view widget and Maps. This has now been added.
• OpManager: Previously, in 'edit Business view’, device and shortcut count was missing. This has been handled now.
• OpManager: Previously, IPSLA monitors were missing in the Business view. This is fixed now.
• OpManager: Under Business views, the device status live update was missing when the page was not refreshed. This has been handled now.
• OpManager: Earlier there was an issue with deleting and re-adding devices in business view. This has now been fixed.
• OpManager: Previously, when changing font type, size or color in business view, the devices were rearranged automatically. This issue has been fixed.
• OpManager: Under Maps, ‘Set as default option’ for Business view,List and Dashboard has been added.
• OpManager: The back view of the rack was missing in the new version. This is fixed now.
• OpManager: Previously, Rack view and 3D floor embedded view was not working. This issue is now fixed.
• OpManager: Device status mismatch issue under Rack widgets in Dashboard has been fixed.
• OpManager: Previously, in google map widget, probe option was displayed for Essential build. This has been fixed now.
• OpManager: Interface port status icon in inventory list view has been added.
• OpManager: Users can now view device category specific dashboards in the inventory page.
• OpManager: Set as Default view has been added for Inventory Device and Interface List.
• OpManager: Users can enable or disable the Group chat,Rack & 3D floor view features under System Settings. (By default Group Chat feature has been disabled.)
• OpManager: Graph were not displayed for Interface Receive and Transmit dials. This has been fixed now.
• OpManager: Previously, Interface Bandwidth Report schedule won’t be generated for the given time period. This has been fixed now.

Build No - 123123 - April 26, 2018

• NCM: Compliance page has been added in left menu bar for quick access. All compliance-related functionalities are now available under this page.
• NCM: Now, you can share Custom Device Templates to NCM Administrators worldwide in 'Device template >> Custom >> Share’.
• NCM: Additional hardware information for Cisco devices is now displayed in the Device Snapshot page under ‘Inventory’ tab. We will support other vendors also in the near future.
• NCM: You can now search devices by providing their hardware details, in ‘Inventory >> Devices >> Search by hardware details’ (Filter icon on top-right corner).
• NCM: Device selection list is sorted in ‘Configlets Execution’ and ‘Schedules’ pages with the IP addresses of the devices.
• NCM: ‘Should contain exact set’ in Compliance rule criteria is now fixed and executes properly.
• NCM: The Rule Compliance page under MSSQL now displays the necessary data.
• NCM: The ‘%’ symbol in labels of configlet parameters from ‘Execute Configlet’ page has been removed.

Build No - 123122 - April 25, 2018

• OpManager: Previously, it was possible to access the attached html files in GroupChat. This issue has been fixed.
• OpManager: In the GroupChat module, getActivityData api was prone to SQL Injection vulnerability. This issue has been fixed.
• OpManager: In Credential module, Stored Cross-site Scripting (XSS) vulnerability has been fixed (CVE-2018-10803).
• OpManager: Previously, Improper file format was accepted during CSV Discovery. This issue has been fixed.
• OpManager: Previously, Discovery profile name is vulnerable to Cross-site Scripting (XSS). This issue has been fixed.

Build No - 123121 - April 24, 2018

• OpManager: In the Add/Edit Performance Monitor page under Device Snapshot and in Device Template page, Regex pattern threshold field length has been increased from 50 to 100.
• OpManager: In the Add Performance Monitors page under Device Snapshot and in Device Template page, general monitors were not listed for addition. This has been fixed now.
• OpManager: While updating SSH credential from global credential and device snapshot page, SSH key authentication file was stored in an incorrect path. This has been fixed now.
• OpManager: Under System settings page, a unique SysName option has been provided to avoid multiple interfaces of the same device being discovered as new devices.
• OpManager: Previously, option to add a single device using device name was missing under schedule discovery profile. This has been added now.
• OpManager: Previously, Windows 10 device was discovered as Windows 8 via SNMP. This has been fixed now.
• OpManager: Previously, in the device snapshot page, the dials displayed data but the Monitors tab was empty. This has been fixed now.

Build No - 123120 - April 20, 2018

• OpManager: In Quick Configuration Wizard, option to update threshold configuration for a specific group of partition detail monitors for multiple devices has been included.
• OpManager: In Quick Configuration Wizard, option to add or update threshold configuration for multiple VMware datastore monitors has been included.
• OpManager: UI misalignment in the Quick Configuration Wizard page has been fixed.
• OpManager: Previously, in Performance monitor page under Settings, when performing apply and overwrite operation after editing any monitor threshold, Store Data value of the monitor was changed to false by default. This has now been fixed.
• OpManager: Previously, from Performance Monitors under Settings page, VMware and Xen Monitors where not getting applied/associated to devices even for VMware and Xen devices respectively. This has been fixed now.

Build No - 123119 - April 18, 2018

• OpUtils : Under SNMP tools from settings, a tool called MIB node viewer that is used to provide the complete details of the selected MIB has been added.
• OpUtils : Under SNMP tools from settings, a tool called MIB module viewer which is used to provide a snapshot of a given MIB has been added.
• OpUtils: Under Switch Port Mapper(SPM), the tree view has been added.
• OpUtils: The IP snapshot page has been improved by adding missing data and actions.
• OpUtils: The MAC-IP list, which was a missing tool, has been added.
• OpUtils: Under the Subnet snapshot page, the options to edit and scan has been added.
• OpUtils: Under the Subnet snapshot page, the option to delete alerts has been added.

Build No - 123118 - April 17, 2018

• OpManager: Previously, users were unable to export ‘Availability Dashboard Report’ as PDF and XLS. This issue has been fixed now.
• OpManager: Previously, users were unable to schedule ‘Least and Average availability’ for the Availability Dashboard Report. This issue has been fixed now.
• OpManager: Users can now navigate to the device snapshot page from HyperV Map.
• OpManager: Previously, Last Polled Bandwidth Utilization widget displayed ‘NaN%’ as value. This has been fixed.
• OpManager: STP Port Details has been added for devices falling under switch category.
• OpManager: Now, users can associate Device Template and Credential for devices from Inventory list.
• OpManager: Users can now manage, unmanaged and delete devices in BV list view page.
• OpManager: Previously, Interface threshold settings text inside interface snapshot page was wrong without units. It is corrected now.

Build No - 123113 - April 18, 2018

• Firewall : Previously Security Audit page was empty even though the report was generated. Now the issue is fixed.

Build No - 123112 - April 13, 2018

• OpManager: Option to export ‘At-a-Glance Report’ as PDF and Excel has been included for devices.
• OpManager: During Test Monitor, while adding or editing File Monitor, the File path was not displayed . This has been fixed now.
• OpManager: Previously, for Folder Monitor Graphs, Y-axis units were not displayed. This has been fixed.
• General: Previously under Reports/Settings, when the page was either refreshed or when a new tab was opened, the last opened tab was hidden. This issue has now been fixed.
• General: While refreshing the Inventory page, some sub headers went missing. This issue has now been fixed.

Build No - 123111 - April 11, 2018

• General: Previously, Cookies were prone to Cross-site Scripting (XSS) Vulnerability and they were unsecure for HTTPS protocol. This issue has been fixed.
• General: Clickjacking vulnerability has been fixed.
• OpManager: Previously, unauthorized access to APIKey from APM Plugin was possible due to a vulnerability issue. This has now been fixed.
• OpManager: Modifying or Deleting users in OpManager was not being reflected inside APM Plugin. This issue has been fixed.
• OpManager: Previously, APM plugin was not getting started when OpManager with MSSQL Database was using Windows Authentication for database connectivity. This issue has been fixed.

Build No - 123110 - April 10, 2018

• OpManager: The alignment issue with the columns of Event Reports & Alert Reports - pdf is now fixed, so that xls and pdf reports match.
• OpManager: Operator cannot create/schedule a report anymore.
• OpManager: Previously, when SDP details contained special characters, there were issues while editing the ‘Log a ticket’ notification profile. This has been fixed now.
• OpManager: Issues with downloading PDF reports have been fixed.
• OpManager: ‘No data available for this period’ alert message is displayed when there is no data in integrated report.
• OpManager: Data older than a week is now available in the Interface report builder.
• OpManager: Under ‘Audit’ in Reports, users can now view the logs for scheduled operations.
• OpManager: Under ‘Audit’ in Reports, users can now view the logs for PDF & XLS export operations.
• OpManager: Audit Operation for Device Specific Deletion and Updation has been handled.
• OpManager: While raising event flood warning in OpManager, the message will now specify whether the flood is due to traps or event logs.
• OpManager: Previously, NCM count was not updated in the central server when deleted from the probe. This has been fixed now.
• OpManager: The NCM plug-in URL has been removed in DeviceExpert Change Management & DeviceExpert Operation Failure traps.
• OpManager: Previously, the custom category count of network device’s alarms was displayed wrongly in the Network tab under Dashboard. This has been fixed now.
• OpManager: In version 11600, under Data Diagnostics, the Central & Probe table comparison page was missing previously. This has been fixed now.
• OpManager: While migrating from Linux Essential To Enterprise Edition, the migration failed due to the presence of ‘\’ in MigrateToEnterprise.sh file. This has been fixed now.

Build No - 123109 - April 5, 2018

• OpUtils: Under Reports option, the missing reports of the DHCP has been added.
• OpUtils: Previously under Inventory, the option to edit a group of switches in SPM was not available. The issue is fixed now.
• OpUtils: Previously under OpUtils settings, the port history was in General tab. This is moved to cleanup policy tab now.
• OpUtils: Under Inventory, the category sub filter in port field has added an “administrative disabled/enabled” option.
• OpUtils: Previously under Inventory, the ‘Add to SPM’ option didn’t display a proper Success/Error message in UI. The issue is now fixed.
• OpUtils: Under Inventory, the category sub filter “NIC type” table has been updated to match the IEEE oui list.

Build No - 123108 - April 4, 2018

• OpManager : XML External Entity (XXE) Processing attack affecting import of License, Script Template, Device Template and Workflow has been fixed.

• OpManager : Previously, in Mail Server Settings and Radius Server Settings, the password was being shown as "not_to_display". This issue has been fixed and now the password field will be left blank by default.

• OpManager : Cross-site Scripting (XSS) attack has been fixed.

• OpManager : SQL injection in Submit DB Query Page has been fixed.

Build No - 123107 - April 3, 2018

• NetFlow: ‘Guest’ user privilege has been added for NetFlow installation.
• NetFlow: The issue with the wrong bandwidth value appearing in the “Overview” tab in Interface/Interface Group/IP Group snapshot when custom time period is selected has now been fixed.
• NetFlow: Enhanced raw data dump to avoid increase in tmp/flow_log.txt file size.

Build No - 123106 - April 2, 2018

Bug Fixes in NCM:

• 4439431 - Know which config version is baseline in config diff view. (The Config version that is baseline is mentioned as ‘Baseline’).
• 4550432 - Layout of NCM Nipper reports has been revamped.
• 4571167 - Issue while finding SysOID has been fixed.

Enhancements in NCM:

• View SNMP profiles from System Location and Description pages.
• Select specific SNMP profiles to be used while updating location and description details for devices.
• Add devices as unmanaged if the total number of devices exceeds the license limit.
• More devices are supported by default with the additional SysOIDs.
• I18N keys are now available.
• Minor UI enhancements.

New feature in NCM - Terminal:

• Terminal page can be used to open a terminal to any device in the network.
• Terminal connection to the inventoried devices can be opened under ‘Settings >> NCM >> Inventoried’.
• For devices that support terminal function but are not included in Inventory, the session can be initiated by ‘Settings >> NCM >> Terminal >> Custom’.
• All the terminal sessions will be logged and can be viewed in ‘Settings >> NCM >> Terminal >> Audit History’.

Build No - 123105 - March 29, 2018

• NCM: Network Configuration Manager now scales more. A single server supports 10000 devices. If you need to manage more than 2000 devices, configure the number of parallel job count to a minimum of 50 in ‘Settings >> NCM >> Server settings’ and restart the server.
• NCM: You can trigger a configuration backup operation for any number of devices in a single schedule in 'Settings >> NCM >> Schedule’.
• NCM: You can now apply the credentials for any number of devices successfully from ‘Device Group’ page under Inventory section.

Build No - 123104 - March 28, 2018

• OpManager: Previously, ‘Schedule Report’ did not work for other languages. This issue is now fixed.
• OpManager: Previously, the ‘Schedule Report’ option was missing in the snapshot pages of all performance monitors, availability, interface metrics, Packet loss, response time, Device(at - glance reports), URL and Script Templates. This has been fixed now.
• OpManager: SDP Device asset information will now be in the snapshot page of OPM for all the devices synced with SDP.
• OpManager: The issue with the ping.properties file to view device availability for non-english installations, is now fixed.

Build No - 123093 - March 26, 2018

• OpManager: 100% CPU Utilization issue due to AppSMS has been fixed.

Build No - 123092 - March 22, 2018

• Firewall : Default reports enhanced with drill down option to second and third level. Particularly for 'Unknown Protocols’, you can drill down up to raw log level.
• Firewall : ‘End User’ feature moved to ‘Firewall Inventory’ tab. You can get ‘End User’ details from ‘Users’ Tab.
• Firewall : ‘Rule Management’ and ‘Compliance Reports’ files stored in Firewall Analyzer server directory are encrypted now.
• Firewall : User information is encrypted at the database storage.
• Firewall : ‘CSV Export’ option is available for ‘Rule Management’ reports.
• Firewall : ‘Scheduled Report’ mail format is enhanced to show properly aligned mail content.
• Firewall : Support - 4458020: In ‘Change Management’ report, new column has been added to show the IP address of user from which he did configuration changes.
• Firewall : Support - 4429668: ‘Admin’ report is available for Huawei Firewall. You can view user login, logout and command executed reports.
• Firewall : Support - 4477638: Fixed the issue of incorrect data shown in ‘Policy Optimization reports’ for some PaloAlto devices.
• Firewall : Support - 4519337: Fixed the issue of not fetching configuration files from SonicWALL firewalls due to incorrect SCP command.
• Firewall : Support - 4497009: Fixed issues in ‘Denied Events’ and URL log parsing for Juniper SRX devices.
• Firewall : Support - 4510780: Fixed the issue of wrong time period shown in i-Filter reports data, due to non-processing of time stamp available in the logs.
• Firewall : Support - 4496764: Fixed the issue of mismatch in rules count of unused rules and total rules displayed for some PaloAlto firewalls.
• Firewall : In PaloAlto firewall ‘Policy Overview’ page, no data was displayed when clicked on some source and destination objects. This issue is fixed.
• Firewall : Fixed the issue of no data display in ‘Total Bytes’ column in Trend Micro device reports, due to non-processing of byte value available in the logs.

Build No - 123091 - March 20, 2018

• OpManager: Added an option to switch menu bar alignment into vertical or horizontal.
• OpUtils: The DHCP Scope Monitor of the SNMP tool is enhanced in a way that helps to monitor the DHCP scopes of a given IP address or DHCP server name and scans intermittently based on the scheduler profile created by the user. It also provides an email alert to the user when an IP address in the DHCP scope falls below a specified count.
• OpUtils: The Network Monitor tool is updated to monitor the response time and packet loss of selected devices, creates a history of details that can be viewed by the user.
• OpUtils: The System Details Update of Network monitoring tool has been enhanced in such a way that it is made possible to edit system details of specific devices like sys name, sys location, sys contact and update these details from the remote device itself. The updated status can also be viewed from the remote device.
• NCM: 100% CPU Utilization issue due to Syslog flooding has been fixed.
• NCM: 100% CPU Utilization issue due to Fortigate Firewall backup has been fixed.

Build No - 123090 - March 19, 2018

• General: OpManager now supports SMS notifications via HTTP SMS Gateway and SMPP server.
• General: 4028582 - Now, SMS server settings can be deleted in the UI.
• General: Previously, server secret was visible in Radius Settings. This option is now hidden.
• General: User access Level can be changed by Operator using API.This issue has been fixed.
• General: 4358794-Product version showed undefined in UI when NCM folder existed under OpManager. This issue has been fixed.
• General: 4447605,4421517,4405385,4382147-Option to apply .XML file type in license has been added.
• OpManager: 4479975,3924891- Previously in Script Template, the html content had visibility issues. This has been fixed.
• OpManager: Device name was not being updated when Last Polled returned null value in CPU/Memory/Disk and Bandwidth utilization widget. This issue has been fixed.
• OpManager: Previously, Script Template had XSS vulnerability issues. This has been fixed.
• OpManager: A new tray icon has been implemented for essential, central and probe setup.
• OpManager: Under User Management, the user photo was not deleted from the saved folder even when the user profile was deleted. This issue has been fixed.
• OpManager: Option to enable / disable DB query from system settings screen has been added. Based on the option selected, the DB query inside support is shown/hidden to the user. By default, the option is disabled.
• OpManager: Partial masking of the API Key in UI has been implemented.
• OpManager: Audit implementation for various modules like rebranding, Add/Edit/Delete Domain, Notification, License and Support has been done.
• OpManager: 4244642 - Previously, Clickatell notifications were not working and displayed “Clickatell authentication failure” error message. This issue is fixed now.
• OpManager: 3893820 - SMS Notifications were not received when multiple mobile numbers were given in the SMS Notification profile.
• OpManager: 4252424 - Failover: For a business view created in the primary server with a custom image as background, the image was not loaded when the standby server took over. This issue is now fixed.
• OpManager: 125561 Failover: Primary server’s conf files were not copied to Secondary. This issue is now fixed.
• OpManager: 3835548 - User created dashboards can now be renamed in OpManager.
• OpManager: 4032958 - On embedded 'Heat Map widget’, the tooltip was not displayed. This has been fixed now.
• OpManager: 3660586 - Updated commons-collections jar to version 3.2.2 due to ‘Remote Code Execution’ vulnerability in older version.
• OpManager: 4113354 - In the ‘Send Email Notification’ profile, the length of ‘To Email Address’ field is now increased from 255 to 500 characters.

Build No - 123086 - April 19, 2018

• General : Failed to load the client if the MSSQL database collation is 'Danish_Norwegian_CI_AS’. This issue has now been fixed.

Build No - 123084 - March 15, 2018

• OpManager: Thresholds for Response time and Packet loss can be set for multiple devices.
• OpManager: New Availability graph has been introduced in Device snapshot page->Availability dial->History to show the device up, down status using a line graph.
• OpManager: GPS coordinates will be shown in Device summary tab if the device has been added to Google Maps.
• OpManager: Previously, users were unable to add string monitor with a string threshold in Device Templates. This is now fixed.
• OpManager: The “Configure Interface” option was not displayed for routers. This has been fixed now.
• OpManager: Interface Reports are now available by default on Interface snapshot menu.
• OpManager: SNMP text was displayed for Default dials for availability, Response time and Packet loss. This has been fixed now.
• OpManager: Users can able to discovery and add device without credentials in OpManager.
• OpManager: Previously, SNMP v1/v2 credential mismatch error throws while adding credential in discovery wizard page. This has been fixed now.
• OpManager: Search option has been added for interfaces in device snapshot page.
• OpManager: Table values were not displayed for interface error, discard rate,Traffic Utilization graphs. This has been fixed now.
• OpManager: Previously, “Export as PDF” did not work for all the time periods for the “Interface Bandwidth Report” and the "Interface At a Glance Report". This is fixed now.
• OpManager: Previously, Interface graph time format issue occurred when a period 7 days or 30days, was selected. This issue is fixed now.
• OpManager: Users can now navigate to the device snapshot page from the interface snapshot page toolbar.
• OpManager: Previously, users were unable to align custom html widget, when multiple iframes were called. This has been fixed now.
• OpManager: While creating a business view in IE, navigating to the Multi select mode made the device name disappear. This issue has been fixed now.
• OpManager: XSS vulnerability issue while importing Additional fields has been fixed.
• OpManager: SQL Injection vulnerability has been fixed for Downtime scheduler.
• OpManager: Downtime report not showing the status of currently down devices has been fixed.
• OpManager: Previously, wireless devices were not getting pushed to NCM.This has been fixed.
• OpManager: Previously, when a user generated weekly reports, the days of the week were plotted as numbers. This issue is now fixed.
• OpManager: The issue with the ping.properties file to view device availability for non-english installations, is now fixed.

Build No - 123083 - March 12, 2018

• General: Dashboard loading has been revamped and optimized for better performance.
• General: In the Login page, Iphone/Android and Ipad application download links have been included.
• General: License expiry information in header had a few alignment issues. This has now been fixed.
• General: User Icon with product details and about information has been moved to right top corner.
• General: In the Inventory page, product based tabs have been moved horizontally.
• General: Sign out option has been moved from Quick links to User details menu.
• OpManager: In alarm details page, Alarm actions has been moved from Actions menu to Details page .
• General: Support icon has been added for (Mail, Apply license, phone number, SIF, User guide, Videos, Service pack, ThreadDump, DB Query & view Logs) links.
• General: In support page, the Query page under DB Query will be opened in a new window without ember

Build No - 123082 - March 8, 2018

• OpUtils: Previously under Inventory, the port option does not show any differentiation for connected devices. This issue is fixed now as the connected devices are differentiated based on colours such as orange for virtual IP, grey for multi MAC port and yellow for stacked port.
• OpUtils: Previously, only OpManager API has called for adding switches and hence there was an issue in adding switches in SPM. The issue is fixed now.
• OpUtils: Previously while adding devices, the device explorer option under Cisco tools didn’t display a proper error message like ‘Not a CISCO device’ . The issue is fixed now.
• OpUtils: Previously, the Proxy ping option under tools didn’t show any proper images for scan results. The issue is fixed now.
• OpUtils: Previously under Oputils option, the field ‘Clean up policy location’ was not mentioned in Publish directory of IPAM and SPM. The issue is now fixed.
• OpUtils: Previously under sort summary, when clicking on snapshot page, API was called twice. This issue is fixed now.
• OpUtils: Under reports, a field called ‘Custom Period’ has added in ‘Port by Operation Status Last Change Time’ report.
• OpUtils : 4249914, 4010627 - Under Inventory, the option to add switches by importing a CSV file was included.

Build No - 123081 - March 7, 2018

• NetFlow: The issue related to export to PDF and mail has now been fixed and enhanced.
• NetFlow: Added an option to export to PDF and mail for Individual graph reports.
• NetFlow: Added an option to export to PDF and mail for DPI snapshot widgets and widget drill down reports in the inventory.
• NetFlow: Added an option to change the graph type for time series graphs in the inventory.
• NetFlow: Inventory page related bugs have been fixed.
• NetFlow: Added an option to select Business hours in the Last Quarter time period while scheduling reports
• NetFlow: SFlow flow format for multiple MPLS can be added now.
• NetFlow: Added an option to configure billing with base cost as zero.
• NetFlow: The loading issue in the Dashboard with NBAR App widget has now been fixed.

Build No - 123080 - March 5, 2018

• OpManager: Previously, installation failed when the installation/default folder name contained spaces or when OpManager was installed under the location C:\Program Files . This has been fixed now.
• OpManager: In Probe, under settings, ‘Failover details’ tab was not displayed. In Central server, Settings-> Configuration-> Probe Details, Secondary server and its details were also not displayed. Now both the issues have been fixed and they have been displayed in the respective UI.

Build No - 123079 - March 1, 2018

• Even after deleting the MSSQL Instance from the device in the OpManager, false alerts of that mssql service instance being down were getting raised. This has been fixed now.
• The vCenter discovery failed if any VM replica was created with duplicate UUID as of the existing VM in OpManger. This has been fixed now.
• In the case of both vCenter and ESX based monitoring done from OpManager, under Inventory view of Virtualization, the vCenter/Host filter was showing incorrect data. This has been fixed now.
• Although invalid VMware credential was given during vCenter/ESX discovery, the device was getting added as Unknown (normal device). This has been handled and now device will be discovered and added in OpManager only if valid credential is selected.
• If tab space ‘\t’ was included in any monitor name, Monitors page inside the Device Snapshot page was shown blank. This has been fixed and further ‘\t’ space will not be allowed in the monitor name.
• It was not possible to edit custom WMI Monitors like Disk Monitors with special character ‘\’ in its instance name. This has been fixed now.
• While saving URL properties from URL Snapshot, the page was redirected to Settings page instead of the previously selected URL Monitor page. This has been fixed now.
• While trying to add Service Monitors from Device Snapshot page, clicking ‘Cancel’ redirected the page to Settings page instead of the previously selected Device Monitors page. This has been fixed now.
• While trying to associate devices with File/Folder monitor templates, the eligible devices list shown was not sorted in the alphabetical order. This has been fixed now.
• The validation of various Threshold value-specific fields was not done for File/Folder Monitors addition. This has been handled now.
• For Hardware Monitoring in some cases, only single sensor for FAN Category with multiple instance was getting added and displayed in device snapshot page. This has been fixed now.
• In Hardware page under device snapshot page, the units were not shown under Hardware Monitor graph. This has been fixed now.
• XenServer discovery failed if there were no VM’s inside the pool and only Templates existed. This has been fixed now.
• Adding/Updating Event Logs Monitors from Settings page is failed, if rules or logs contained special character '\’. This has been fixed now.

Build No - 123078 - February 27, 2018

• OpManager: Under Alarms, Clear trap events were raised even though suppress alarm was applied to the device. This has been fixed now.
• OpManager: Trap Forwarder automatically stopped while restarting OpManager Service. This has been fixed.
• OpManager: Trap Processors page did not have any description. This has now been fixed.
• OpManager: In ‘Load from Mibs’ page, the default info message was missing when copying mib file to OpManager/mibs. This has now been fixed.
• OpManager: Trap Forwarder was not showing running/stopped status message. This has been fixed.
• OpManager: The trap description column showed ‘More Link’ (Old client) in ‘Add traps’ page from 'Load From Mibs’. This has been fixed.
• OpManager: Last polled value was not being sent in 'Send trap using Notification Profile’. This has been fixed.
• OpManager: Under Unsolicited trap, specific type field was not shown when clicking on 'Create trap processor’. This has been fixed.
• OpManager: Previously added traps in ‘Add trap page’ from ‘Load From Mibs’ could not be disabled and selected by default. This has now been fixed.
• OpManager: Serial number looked odd in ‘Load from traps’ page. This has been fixed.
• OpManager: Search option was not provided in ‘Add traps from mibs’ and 'Load from mibs’. This has been fixed.

Build No - 123077 - February 23, 2018

• OpManager: Users can now mask/unmask the data of other modules like Flow Analysis, Config Management, Firewall Log Analysis, IP Management, Packet Analysis and Application Monitoring in the UI, by configuring System Settings.

• OpManager: 4465019,4476757,4530031 - On DB Disconnection, the license page displayed a wrong warning message on IPSLA monitors. This has been fixed now.

• General: Previously, an Operator user was able to access log files using direct API’s (/apiclient/ember/index.jsp#/ViewLogs/stderr_0.txt) and URLs (/logs/stderr_0.txt). This vulnerability issue has been fixed now.

Build No - 123076 - February 22, 2018

• OpManager: Alarm - Workflow logs can now be categorized into alarm specific and device specific ones on the 11.6 struts client.
• OpManager: Workflow status bar has been given under the Workflow Tab now.
• OpManager: While clicking the PDF option repeatedly, the duplicate element gets created. This issue is fixed now.
• OpManager: In the device snapshot page, authorization to access workflow logs for operator log-in failed. This issue is now fixed.

Build No - 123070 - February 21, 2018

• General : SQL injection vulnerabilities in Servlet’s API has been fixed.

Build No - 123069 - February 19, 2018

• OpManager: If a logged in user’s account is deleted by an admin, the user will be notified and logged out automatically.
• OpManager: The settings option ‘Add/Remove widgets in default dashboard’ under System Settings was not preserved during service restart. This is fixed now.
• The following vulnerability issue has been fixed in OpManager:
  • Unauthenticated Blind SQL Injection via /servlets/FailoverHelperServlet.
• NCM: Backup operation fails for the following device type in builds 12300 to 123064 due to Maverick upgrade. Device backup command response stops in the middle of an execution and expects an enter key (LineFeed) to send the remaining response. This issue has been fixed in this release and now you are able to backup this device type without any issues.
  • Device type: Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M),Version 03.07.03E RELEASE SOFTWARE

Build No - 123068 - February 16, 2018

• OpManager: Previously, if a custom category was associated to a device in non-english language web client, the device snapshot page did not open. This has been fixed now.
• OpManager: In the inventory list view page, the device IPs were not in order when sorted by IP Address. This has been fixed now.
• OpManager: Previously, the device IP Address was not available in the Device/Interface Availability reports. This has been added now.
• OpManager: Previously, when a custom category associated to a device was deleted, the device was listed as unknown instead of the parent category. This has been fixed now.

Build No - 123067 - February 14, 2018

• OpManager: Device specific workflow logs are available on the snapshot page now.
• OpManager: Jump To ServiceDeskPlus from OpManager has been handled now.
• OpManager: Previously, retrieving services for different domain users in workflow tasks was not possible. This issue is fixed now
• OpManager: Previously, users were unable to add/edit/update workflow in some special cases like HTML content being present in script body. This issue is fixed now.
• OpManager: Under Workflow tasks, the Reboot and Shut down options did not work properly due to client issue. This has been fixed.
• OpManager: The unwanted scroll bar displayed in the pdf file is fixed now.
• OpManager: Previously, users were unable to schedule report after canceling a monthly scheduled report/weekly scheduled report. This issue has been fixed now.
• OpManager: Usability issue - The error message ‘Schedule Report name already exists’ was displayed while creating the report name itself. This issue is now fixed.

Build No - 123066 - February 13, 2018

• OpManager: 4175032 - Email notifications are triggered while the Primary server gets back to Active mode and the information is provided in the banner whether the running setup is the primary or the secondary server.
• OpManager: 2826598 - Previously, users were unable to install OpManager as service in RedHat 7.x machines. This issue is now fixed.
• OpManager: 4243641 - Previously, credential test passed but the data collection in some CLI devices failed. This issue is now fixed.
• OpManager: 4368835 - While restoring PGSQL backups, duplicate key and foreign key violation issues have been fixed now.
• OpManager: 4218544 - During PGSQL to MSSQL migration, the time round off issue causing the duplicate key issue on dynamic tables, is fixed.
• OpManager: Previously, BCP file location was not loaded to the bin directory automatically. This is fixed now.
• OpManager: Previously, the secondary server started even when there was a mismatch in the build number with the Primary server. This has been handled now.
• OpManager: DBConfiguration.bat - Previously, while providing a different DB Name displayed “OpManagerDB exists already” error. This is now fixed.
• OpManager: Proper encoding for Chinese messages have been provided now.
• OpManager: The DB restore issue occurring while using remote PGSQL DB with the password, is now fixed.

Build No - 123065 - February 9, 2018

• OpManager: Minor enhancement and bug fixes have been provided for a seamless migration from the Essential Edition to the Enterprise Edition.
• OpManager: The SNMP ping tool under Settings-> Tools now has the option to choose devices and credentials that are already added in the product. You can also manually enter the device name or IP address by clicking on the (+) icon.
• OpManager: The MiB Browser tool under Settings -> Tools now has the option to choose devices and credentials that are already added in the product. You can also manually enter the device name or IP address by clicking on the (+) icon.

Build No - 123064 - February 8, 2018

Enhancements:

• FWA: Provision to configure each device in the Inventory itself. For a single device, you can configure Report, Alert, Device Rule, and SNMP in one place.
• FWA: Ad-hoc reports are listed in the drill down page of ‘Device’ under Inventory.
• FWA: ‘Device’ summary widget under Inventory, is enhanced to show more device configuration options
• FWA: Cloud Control Repository updated and new services added.
• FWA: ‘No Data’ message will be displayed in widget header, if a widget has no data to display. If the widget has data, total number of rows will be displayed.
• FWA: Reduced the ‘Inventory’ page loading time.
• FWA: By default, indexing enabled for Security Logs.
• FWA: Support Id: 4400799 - New widget added under drill down page of 'Cloud Control’. The widget shows all source IP addresses, who accessed the corresponding ‘Cloud’ service.

Issue Fixes:

• FWA Support Id: 4223153 - Bandwidth Alert profiles created with criteria ‘mbps’ were not working. This issue is fixed

• FWA Support Id: 4223153 - URL report, date and priority parsing issues of pfSense firewall is fixed.

• FWA Support Id: 4275699 - When one Juniper SRX device was added it was displayed as two devices. This was due to absence of firewall name in some syslogs. This issue is fixed to show it as a one device.

• FWA Issue Id: 124479 - Earlier user couldn’t edit the report filter while creating 'Report Profile’. Now ‘Edit’ option provided for the report filters to fix the issue.

• FWA Issue Id:126112 - After selecting custom time period in ‘Inventory’ drill down page, the end time was not shown properly. This issue is fixed.

• FWA Issue Id:126077 - In ‘Add Credential Profile’ page, ‘Device Type’ option is moved up near ‘Protocol’ for better accessibility.

• FWA Issue Id:126332 - In ‘Device Rule’ list page, sorting of any column, removed ‘Fetch Rules’ and ‘Security Audit Report’ icons. This issue is fixed.

• NCM: Alert message for existing device while adding non SNMP devices.

• NCM: Time based report for configuration change.

• NCM: 4318485: Schedule Security Audit Report is now added

• NCM: Now you can view compliance policy violation widget in dashboard

• NCM: View configuration file while uploading labeled configuration.

• NCM: Help document now available on how to execute Configlet.

Build No - 123063 - February 7, 2018

•   General: 4209070 - Error code and error message related to mail user authentication from SMTP mailer will now be displayed in the UI, upon testing mail from Mail Server Settings
  

•   General: 4238670 - Under Proxy Server Settings, the 'NoProxyFor' field length is now increased from 255 to 1000 characters.
  

•   OpManager: 4389441 - Under Send Email notification profile, the issue with adding other language characters and HTML tags in the message field has been fixed.
  

•   OpManager: 4397025 - Previously Email based SMS was received as Raw text because of Multipart/Mixed content type. This issue has been fixed. Email SMS will now be sent as plain/text content.
  

•   OpManager: 4335844 - For Traps with Failure Component not ending with "\_trap", Notification Profile was not triggered previously. This has been fixed.
  

•   OpManager: 4335844 - Notification Profile was triggered for trap with clear severity, even when the "notify me when clear" profile criteria was not selected. This has been fixed now.
  

•   OpManager: 4139976,4099988 - In Linux Installation, Command arguments in Run Program and Run System Command Notification Profile were getting truncated with space previously. This issue has been fixed now.
  

•   OpManager: 4499794 - Interface specific message variables in Notification profile were not replaced with proper values while sending Notification Alerts. This issue has been fixed now.
  

•   OpManager: 4369593- Uploading MIBs with .txt format in MIBBrowser Tool is supported now.
  

Build No - 123062 - February 5, 2018

• NetFlow: Now supports Meraki’s latest firmware upgrade.
• NetFlow: Removed product version number in the subject line of alert mail.
• NetFlow: Added an option to select number of records as “30” for consolidated report.
• NetFlow: Issue with showing the incorrect cost unit while editing billing profile has been fixed.
• NetFlow: Added the value for MIN and MAX traffic in AS View.
• NetFlow: Issue with generating CSV Report for WLC under Schedule Profile has been fixed.
• NetFlow: Issue with deleting WLC device from inventory page has been fixed now.
• NetFlow: Issue with listing interfaces in Qos drill down view has been fixed.
• NetFlow: Removed the Free Version from the installation shield.
• NetFlow: Issue with listing of interfaces in the Interface widget under Device snapshot has been fixed now and changed to a maximum of 10 interfaces.

Build No - 123057 - January 31, 2018

• OpManager: Outage history details are also generated as a PDF in Availability Statistics Report.
• OpManager: Availability distribution alternatively displaying blue bar (not-monitored status) has been fixed.
• OpManager: Under Interface Snapshot, option to open a new or separate tab has been added in the Interface graph page.
• OpManager: Schedules were not listed under Downtime Scheduler. This has now been fixed.
• OpManager: In downtime scheduler, previously the schedules could be deleted or disabled when they were running. This has now been fixed.
• OpManager: Under Interface Graphs, ‘Interface Display name’ has been changed to ‘Interface name’
• The following vulnerability issues have been fixed in OpManager:
  • DDI-VRT-2018-02 – Unauthenticated Blind SQL Injection via /servlets/RegisterAgent
  • DDI-VRT-2018-03 – Unauthenticated Blind SQL Injection via /servlets/StatusUpdateServlet and /servlets/AgentActionServlet
  • DDI-VRT-2018-04 – Multiple Unauthenticated Blind SQL Injections via /embedWidget
  • DDI-VRT-2018-05 – Unauthenticated XML External Entity Injection via /SNMPDiscoveryURL
  • DDI-VRT-2018-06 – Unauthenticated Blind SQL Injection via /unauthenticatedservlets/ELARequestHandler and /unauthenticatedservlets/NPMRequestHandler
  • DDI-VRT-2018-07 – User Enumeration via /servlets/ConfServlet.

Build No - 123056 - January 30, 2018

• OpManager: In device snapshot page, the option to delete Event Log Rule Monitors in bulk has now been added.
• OpManager: Under Exchange Monitors tab in device snapshot page, grouping of Exchange Monitors was not done in Central & Probe installations. This has been fixed now.
• OpManager: While adding Service Monitors, values beyond the range of specified Port values were allowed for Port number. This has been fixed now.
• OpManager: In Virtualization Dashboard, the units of the Monitors were not shown for the widgets. This has been fixed now.
• OpManager: Previously, Associating Event Log Monitor to a device was not working if the event log belonged to a Rule type that has not been associated to that device. This has been fixed now.
• OpManager: Under Virtual Servers, Graphical(Map) View showing the link between Hosts/VM/vCenter for VMware/HyperV/Xen Servers from the snapshot pages has now been added.
• OpManager: Previously, Export to PDF/XLS option in Hardware Monitor Reports returned an empty file. This has been fixed now.
• OpManager: Previously, the Schedule Report option under Hardware Monitor Reports was not working as scheduled with the selected parameters. This has now been fixed.
• OpManager: In Device Snapshot page, the Legend Summary of the Hardware graph was not available. This has been added now.
• OpManager: In Alarms Inventory View, the option to filter VMware Events separately has been added.
• OpManager: In the Add Performance Monitors Page from Device snapshot and Device Template pages, the specific Vendor monitors and WMI monitors, if applicable, were not listed for addition. This has been fixed now.

Build No - 123055 - January 25, 2018

• Advanced Configuration Search in Inventory page with multiple search conditions.
• Shared Device Template and Request New Device Templates options are provided.
• #4224773: List view of devices associated to each credential profile
• Credential profile is now moved under NCM Tab in settings.
• Now access & edit system properties from NCM GUI.
• Device Group widgets with status of Backup, Compliance and Conflict status bar charts now available in inventory.
• Execute Configlets option is provided in the select menu in Devices Inventory at the top right corner.
• Snapshot Configlets without parameters will be executed directly without prompting for parameters.
• SSH Settings: Allow/block Ciphers, Key Exchange and HMACs in product settings page.
• ‘User audit clean up’ option is now available in Database Administration settings.

Build No - 123054 - January 24, 2018

• General: 4396270 - Self Monitoring - Whenever the server is restarted after low Disk Free Space alert, the monitor shows wrong alerts, even when the required free space is maintained. This issue has been fixed now.
• OpManager: 4351130 - The processing time of notification profile was longer due to many(1000+) trap monitors being selected in the Profile Criteria, causing delay in Mail alerts. This issue has been fixed now.
• OpManager: 4274768 - While loading MIBs from the MIB Browser, the error message is now displayed with the MIB standard version.
• OpManager: In device snapshot page, Audit History filters have been made installation/device type specific.
• OpManager: API Access report’s timezone has been changed from UTC to system timezone.

Build No - 123053 - January 19, 2018

• OpManager: Under business views, the link traffic status colors did not change based on the utilization previously. This issue is now fixed.
• OpManager: In the business view widget, the links to access the devices were missing. This issue is fixed now.
• OpManager: Auto-refresh was not working for the dashboards when any tabs from Applications under Servers were clicked. This has been fixed now.
• OpManager: In Business Views created in before version 12(old UI), during mouse over, the device details pop-up in the dashboard continued to display until the page was refreshed(in version 12 and above). This issue is fixed now.
• OpManager: Previously there was no option to change the name of the Rack and Floor View. This is fixed now.
• OpManager: The issue with the Business view widget resizing is fixed now.
• OpManager: While accessing OpManager web client from remote servers, there was a time discrepancy issue with graph and data display when hosted on UTC time zone. This has been fixed now.
• OpManager: Under Link Properties of Business Views, while getting status from NFA The color of the connection mismatched with that of the legend. While clicking on the connection if the utilization was 5% for IN and 11% for OUT, the connection was displayed in green instead of blue. This is now fixed.
• OpManager: Under Business View, upon mouse rollover on NFA links, it did not display the selected data type in the link Properties of the connection. This has been fixed now.
• OpManager: Under Business View, NFA Source and destination links were not retained while editing the link. This issue is now fixed.
• OpManager: In Network discovery, the addition of Partition and disk space monitors failed for CLI credentials. This issue is now fixed.
• OpManager: In VLAN graphs, the data displayed in the graph was not in order. This issue is fixed now.
• OpManager: Under Monitoring tab, in Performance monitors, the description was not displayed for custom monitors. This issue is now fixed.
• OpManager: Under Monitoring tab, in Performance monitors “Delete” option is now added to custom monitors.
• OpManager: In Device rediscovery, Unmanaged devices cannot be rediscovered now.
• OpManager: In Quick Configuration Wizard, Dependency devices listing was not sorted previously. This issue is now fixed.
• OpManager: In Device Templates, the issue with matching SysOID criteria and Custom OID criteria are fixed now.

Build No - 123052 - January 17, 2018

• OpManager, NetFlow Analyzer, Network Configuration Manager, Firewall Analyzer and OpUtils: The possibility to fetch user details through ConfServlet has been fixed and is secured now.
• NetFlow: Schedule reports for report period as “Previous Week” shows data for current week. This issue has been fixed now.

Build No - 123051 - January 12, 2018

• OpManager: Previously, under group chat option, the Business view users were able to see the alarm discussions for all devices including the devices for which they had no access to. This issue is fixed now.

• OpManager: Previously, the Discussions option under group chat had an issue in viewing the full thread. This issue is now fixed.

• OpManager: Previously, in Business view option, the devices, which were not monitored, were showing their status as clear. This issue is now fixed.

• OpManager: Previously, the option to edit a link in a Business view was not working. This issue is now fixed.

• OpManager: Previously, the Business view status under maps which showed “wrong severity” is fixed now.

• OpManager: Previously, in business view option, the list view device status was displayed as “unknown” instead of unmanaged. This issue is now fixed.

• OpManager: Previously, in business view option, the map view device status was displayed as “unmanaged” instead of "device not monitored". This issue is now fixed.

• OpManager: Under Maps, the device status was displayed as “clear” instead of the “device not monitored” in the graph of business views. This has been fixed now.

• Build No - 123050 - January 9, 2018

• Under Alarms tab, I18N for “No Data” & “No Alarms for selected Period” was not present previously. This issue is now fixed.

• Under Reports, the sorting feature was not working. When the first column (min) was sorted, the other columns (max,avg) change randomly. This issue is now fixed.

• Previously, sorting feature did not work for device names in the “DISK USAGE BY DRIVES” report. This issue is now fixed.

• Under reports, while selecting the “last date” in the monthly schedule, the scheduler was not able to identify the last date for that particular month. This issue is now fixed.

• After upgrading to the latest version, the scheduled reports were not listed. This issue is now fixed.

Build No - 123049 - January 8, 2018

• OpUtils: Filters have been added in the device snapshot pages of Ports and IP Address.
• OpUtils: 4249914 - Under reports, the “Export” option is now more visible on the top of the page.
• OpUtils: Previously in the rogue dashboard, 1000 recently discovered devices were displayed. Because of this, the page loading time had increased. This issue is fixed by reducing the number of recently discovered devices from 1000 to 100.
• OpUtils: Under Inventory, wrong tab details were displayed under sub filters, in the left side of the page. This is now fixed.
• OpUtils: 3740821 - Under port snapshot page, the field “Physical Location” can now be edited.
• OpUtils: 4120052 - Previously, DHCP Scopes scanning was not completed due to null values in clientinfo. This issue is now fixed.
• OpUtils: Previously, when license count was 3, users were able to add 4 users (Including admin), but then OpUtils displayed the license activation page in the next login session. This issue is now fixed to add only 3 users including admin.
• OpUtils: After deleting DHCP, the page was not refreshed. This issue is now fixed.
• OpUtils: Under IP address tab in the inventory, the asset tag data was missing previously. This is now fixed.

Build No - 123048 - January 5, 2018

• OpManager: The Delete/Exit action performed on any process template was executed on all the process templates with the same name but different path arguments. This has been fixed, and now the action will be performed only on that specific process.
• OpManager: Language localization has been done for threshold column values inside the performance monitors Page
• OpManager: Under downtime widgets, the downtime of URLs, services, devices, WAN Links were displayed as zero seconds. This issue is fixed now.
• OpManager: For default virtual reports, the user was able to view devices that he did not have access to. This issue is fixed now.
• OpManager: In some cases, the discovery of HyperV-Servers failed when the same HyperV-Server was deleted and discovered again in a short span of time.This has been fixed now.
• OpManager: If the user tried to dissociate all the devices associated to a certain Windows Service Monitor, a false alert was displayed to the user to select at least one monitor. This has been fixed now.
• OpManager: While adding a new windows service monitor from the device snapshot page, the consecutive value and restart actions value were set to default values for the already associated monitors to that device.This has been fixed now.
• OpManager: It was not possible for the user to add any recently deleted VMware/HyperV/Xen monitor to that specific vendor based virtual server from the snapshot page. This has been fixed now.
• OpManager: HyperV specific monitors were added to the normal physical server for Microsoft devices from device snapshot page. This has been fixed now.
• OpManager: While mapping any new device that was monitored in OpManager to “Not Monitored VM’s” in a vCenter/ESX Server snapshot page, the existing display name of that device was changed. This has been fixed now.
• OpManager: While adding a new windows service monitor from the device snapshot page by getting a new list from the actual device, the existing associated monitors were deleted from the OpManager when those monitors were not available in the actual device. This issue is now fixed.
• OpManager: The inconsistency in allowing some special characters in the URL Display when added during CSV file Import and from the web client is now fixed.
• OpManager: Previously, while adding URL monitors, the value 0 was allowed for “Time-Out” and “Consecutive Times” field. This has been fixed now.
• OpManager: While associating a URL Template to the device using RuleEngine, the consecutive time value for the monitor was not updated. This has been fixed.
• OpManager: While configuring a URL monitor from the device snapshot page and the URL template page, the “Request Parameters” field did not accept more than one parameter. This has been fixed now.
• OpManager: In the Application Monitors page, for AD/Exchange/MSSQL value with repeated digits for threshold or poll interval fields were not allowed. This has been fixed now.
• OpManager: Previously language localization was not done for the “Path Not Found” text while executing “Test Monitor” from the “Add Folder Monitor” page. This has been fixed now.

Build No - 123047 - January 4, 2018

• NetFlow: The framework for mail generation in NetFlow Analyzer has been revamped.
• NetFlow: The issue with licensing in attacks has been fixed.
• NetFlow: In Attacks module, time zone has been added in message for SMS alert.
• NetFlow: Language translation issue in Attacks snapshot has been fixed now.

Build No - 123046 - January 2, 2018

• OpManager: 4085539 Previously “Export to PDF” and “Export to XLS” option was missing in script monitors’ graph. This has been added now.
• OpManager: 4283982 Previously users were able to connect to the device terminal only for routers and switches. Now, the device terminal can be connected from OpManager’s device snapshot page, if the NCM credentials are available.
• OpManager: Earlier users were able to edit syslogs while the forwarder was running. This issue is now fixed.
• OpManager: 4277543 While associating script templates, devices can now be sorted by "device name".
• OpManager: 4271014 Linux memory utilization command has been changed to support Red Hat Enterprise Linux 7
• General: SQL injection vulnerabilities in unauthenticated servlets has been fixed.
• General: 4409775 The HTTP PUT method is now blocked, in Tomcat and the vulnerability is fixed.(Refer - CVE-2017-12617)

Build No - 123045 - December 28, 2017

• Firewall: i-FILTER Version10 device logs support.
• Firewall: Previously drill down option was available for tables only. Now user can drill down graph and see relevant data in reports.
• Firewall: X and Y axis labels added in all graphs.
• Firewall: In Live Syslog viewer, Filter option provided for source IP. Now Live Viewer page can be filtered to show syslogs from a single firewall.
• Firewall: In Inventory drill down page, start and end time is shown near clock icon for all time periods.
• Firewall: System settings page is added to Settings. This includes General and Logging configurations.
• Firewall: Previously when custom time period was selected, the time range was not shown. Now the issue is fixed and proper time range is shown.
• Firewall: No data in all reports for Sonicwall Device. The issue was, few logs had large duration value. Due to this, an error occurred and data was not dumped. Now the issue is fixed.
• Firewall: Live traffic drill down data was fetched for a full day before. Now the issue is fixed and 5 min time criteria are applied to fetch data.
• Firewall: Under Credential Profile page, newly added devices are included. Now user can create Credential Profiles for all Supported Devices.
• Firewall: Added i18n support for Graph labels and other reports.
• Firewall: Disabling VDOM in User Config Page deletes all device rules configured. Now the issue is fixed.
• Firewall: Empty table issue while sorting column in Traffic Trend Report is fixed.
• OpManager: In interface snapshot page, the Schedule option under reports have been added to Bandwidth Utilization and At-a-Glance reports
• OpManager: In Interface snapshot page, the PDF option under reports, has been added to At-a-Glance report
• OpManager: In Interface snapshot page, inconsistent traffic data between At-a-Glance and Bandwidth reports. This issue has been fixed
• OpManager: Previously, when clicked on any graph in Interface snapshot page under graphs icon, few interface details such as Circuit Id, IfName, IfIndex, IfDesc, IfAlias, and ParentName were missing in interface reports in PDF format. This issue is fixed now.

Build No - 123044 - December 27, 2017

• General: 4141842 - Restoration failed when instance length exceeded 255 characters in StatsData table. This issue is now fixed.
• General: After expiry, the license can now be applied in the popup that is prompted once OpManager starts, instead of applying at the command prompt.
• General: After applying the license, the state of IPSLAs changed from “unmanaged” to “managed” previously. This issue is now fixed.
• General: Google map was not restored in the backup/restore process previously. This issue is now fixed.
• OpManager: When more than one probe existed, device count was displayed as zero in the probe’s license activation page. This is fixed now.
• OpManager: Audit logs were not recorded for some APIs when the REST API was called from external sources. This issue is fixed now.

Build No - 123043 - December 22, 2017

• OpManager: Previously, APM plugin’s visible area was too small. This is now moved to Main tabs area, for clearer visibility.
• OpManager: Previously, file monitoring failed when the devices’ WMI Credential contained ". This has been fixed now.
• OpManager: For windows servers, adding free/used disk space WMI Monitors and device partition monitors failed due to the parsing problem of credentials with some specific special characters. This has been fixed.
• OpManager: When OpManager web client’s local language was changed to Chinese, adding WAN RTT Monitor failed. This issue has been fixed now.
• OpManager: Previously, folder monitoring failed when the devices’ WMI credential contained special characters like ",|. This has been fixed now.
• OpManager: When a credential included the special character |, then script execution failed. This has been fixed now.
• OpManager: While adding new monitors from the device snapshot page, users were unable to receive monitors from the device. Also, the same issue was faced when WMI monitors were being added to Device Templates. This happened if the device had the special character (") in its credential. This has been fixed now.
• OpManager: In the global Windows Services template page, previously the success message for add operation was displayed as Failure Message indicator. This issue is fixed now.
• OpManager: Displayed success message, even when the addition of WMI Partition Monitors to devices failed. This has been fixed now.
• OpManager: During workflow execution, the Check File/Folder Tasks failed due to the presence of some special characters in the password. This has been fixed now.
• OpManager: In the virtualization inventory page, filter selection for various tabs did not display the device list as per selection, when any operation like delete was done after the selection or when coming from a different page.
• OpManager: In Reports page, language localization was not done for Reports title and the description message for the default virtual server reports. This has been fixed now.
• OpManager: Under URL availability Widgets, the undefined page was displayed when selecting any URL Monitor, instead of displaying the URL snapshot page.
• OpManager: Previously, CLI Credentials were missing in Add VMware vCenter/ESX page specific to vCenter/ESX. This has been fixed now.
• OpManager: Under Data Maintenance page in Basic Settings, RunArchive button did not work when the Daily Archive option was selected. This has been fixed now.

Build No - 123037 - December 21, 2017

• OpManager: Alarm escalation was not working previously when a business view had been renamed. This issue is now fixed.
• OpManager: Previously under reports, the Audit function did not record workflow logs. This issue is fixed now.
• General: Previously when a user takes a tour of OpManager, the message “Move & Resize widgets by drag and drop” was displayed in English, irrespective of other language installations. This issue is now fixed.
• OpManager: Under reports, while creating a new report, “Inventory Reports” field displayed English characters irrespective of other language installations. This issue is now fixed to support I18N.
• OpManager: Under reports, while scheduling them, the “time field window” field did not support I18N. This is now fixed.
• OpManager: Under inventory, while generating reports for any monitor, the “search” field did not support I18N. This has been fixed now.
• OpManager: Previously under reports, the audit function did not record “schedule reports” logs. This issue is now fixed.

Build No - 123036 - December 19, 2017

• OpManager: While deleting an existing Windows service monitor from the device snapshot page, the list scrolls back to top and page navigation details were reset to default values, thus making the user reset the required view and proceed with deletion task. This issue has been fixed now.
• OpManager: Under Add Monitors from device snapshot pages, clicking anywhere on the grid view of the add list led to the de-selection of the selected items in the list. This has been fixed now.
• OpManager: Previously when the CCTV dashboard contained only one widget, the widget size was small. Now, this is displayed in the full-screen size.
• OpManager: Under the "widget Traffic Reports", the interface traffic graphs were displayed. When the user created a NOC view, the graphs in the traffic reports widget had the X-axis cut-off. This issue is now fixed.
• OpManager: Under widgets, users were unable to expand the ‘Top N Conversation’ widgets. This has been fixed now.
• OpManager: From the Virtualization Inventory view, users were unable to delete the Datastore Entity. This has been fixed now.
• OpManager: A link has been provided now to add virtual servers directly from the Virtualization Inventory Page.
• OpManager: For non-english Italian language servers, undefined results were displayed while fetching the Windows Services for “Add Windows Service” operation from the Device Snapshot page. This has been fixed now.
• OpManager: The discovery completion status specific alarm had no differentiation between the discovery from ESX Server or from vCenter. This has been fixed now.
• OpManager: For some upgraded setups, VM sprawl related dashboards and widgets were missing. This has been handled now.
• OpManager: Under Reports, if any of the CPU Utilization/Memory Utilization/Disk Utilization reports were empty, then the entire Health Reports were displayed as empty. This has been handled and fixed.
• OpManager: Xen data collection was not happening for Xen Servers with version 7 and above. This has been fixed now.
• OpManager: While configuring notification profiles, the IPSLA-specific Clear Alarm criteria based notification mail, was received even though the criteria was not selected. This has been fixed now.
• OpManager: Disk Monitors were not added to the local host monitored device when it contained multiple NICs. This has been fixed now.

Build No - 123035 - December 14, 2017

• NCM: Fixed the reporting options (violated rules only, compliant rules only or all rules) in scheduling compliance report for CSV format.
• NCM: Error message for expired time in ‘Once’ option for add schedule page.
• NCM: 4025368 - Fixed the EOL Report with no data in OpManager Probe server.
• NCM: 4244879 - Compliance validation issue in exact set criteria rule is fixed.
• NCM: Admin has to give annotation while authorizing/unauthorizing configchanges.
• NCM: System settings page is enabled for NCM.
• NCM: Filter by time option is provided in changes page.
• NCM: Aruba Controller backup failure issue is fixed.
• NCM: Now configure the number of parallel threads for SSH connection.

Build No - 123034 - December 12, 2017

• OpManager: While adding a custom category with existing name (case-insensitive), users were redirected to Empty Import Devices page. This has been fixed now.
• OpManager: Custom category devices were associated with incorrect polling interval. This issue is now fixed.
• OpManager: Previously, custom category was not set for Windows 7 and Windows 2008 devices. This issue is now fixed.
• OpManager: Interface Rx/Tx Traffic and Utilization data was unavailable in reports, when data exceeded big int character length (19 char) in MSSQL. This has been fixed now.
• OpManager: Under add category in API, users were allowed to create a blank or empty category name. This has been fixed now.
• OpManager: Users were unable to navigate to the device snapshot page from Interface bandwidth report. This issue is now fixed.
• OpManager: Under inventory, the Subnets list view page’s UI was broken previously. This has been fixed now.
• OpManager: Under snapshot page, Graphs icon and click on any graphs show tabular data is not sorted from the last polled value. This issue is now fixed.
• OpManager: Previously, operator users were able to edit outage history reason in device availability reports. This has been fixed now.
• OpManager: Previously under credentials page, the retype password field displayed plain text. This issue is fixed now.
• OpManager: Interface alarm messages were not displayed correctly when the message contained “<<>>” in UI. This issue is now fixed.
• OpManager: The SNMPv3 default port of the MIBBrowser is now changed to 161.
• OpManager: Previously users were unable to update IPv6 IP Address in Edit device details. This issue is now fixed.
• OpManager: Interface graphs can now scale automatically to Mbps or Gbps based on the data.
• OpManager: Previously in real-time traffic widget, the Y axis was not scaled automatically. This issue is now fixed.

Build No - 123033 - December 11, 2017

• NetFlow: Added SNMP support for Wireless LAN Controllers to fetch names of Access Points.
• NetFlow: Client MAC based filter is added newly in Inventory and Snapshot under WLC.
• NetFlow: Widget for Client MAC traffic is added in snapshot view of Client IP.
• NetFlow: Overall Report for IP Groups is added in schedule reports.
• NetFlow: Edit option in Alert profile has been fixed.
• NetFlow: Unwanted vectorwise DB operation is removed to avoid loss of raw data.
• NetFlow: Attacks information is now can be viewed for selected device and interface.
• NetFlow: Issue in attacks search filter has been fixed.
• NetFlow: Option to select Ethernet card name is available in DPI settings.
• NetFlow: Promiscuous mode of ethernet cards has been enabled by default for DPI.

Build No - 123032 - December 6, 2017

• OpUtils: Included actions like add, delete, rename group in IPAM tree under Inventory.
• OpUtils: Option to add/edit subnet location, VLAN name has been provided while modifying a subnet.
• OpUtils: A “Check Now” button is included while adding a switch in the SPM page to verify its presence.
• OpUtils: Under “Switch Ports by ifType” Reports, the IF TYPE was missing for few switch ports previously. This is now fixed
• OpUtils: “M” character had been appending in the total device count in the SPM email alert. This is now fixed
• OpUtils: Previously, WMI query tool was not working due to the presence of “\” in the Name field. This issue is now fixed.
• OpUtils: Under Settings, Active Directory scanning was not working previously, if the password contained special characters. This issue is now fixed.
• OpUtils: Under Add Subnet option, the Redirect link leading to sample csv format was not working. The redirect link is now replaced with a sample csv file.
• OpUtils: In the Mac address resolver under Settings, the error message occurring when SNMP community field was not filled, is now deleted.
• OpUtils: AD Status Summary in Dashboard & IP Addresses was not updated after completing the subnet scan. This issue is now fixed.

Build No - 123031 - December 1, 2017

Issues Fixed

• The Refresh Datastore Workflow task execution displayed success message even when the execution failed. This issue has been fixed.
• If there was any change in Canonical Path Names for the LUN Multipath associated to ESX Servers, then rediscovery of vCenter failed. This has been fixed now.
• AMS Expiry notification was not shown to users irrespective of their version.This has been fixed now.
• AppManager plugin data was not displayed to Read Only users even though they had access to all the devices. This issue has been fixed to display APM Plugin data to all the non business view users.
• NT Services that has comma (,) in their Service Name or Display Names were not added in OpManager. This has been fixed now.

Enhancement

• Once a VMware Datastore was deleted or had stopped monitoring in OpManager, there was no option to re-start monitoring. This option is included now.

Build No - 123030 - November 28, 2017

• OpManager will now integrate with SDP through rest APIs. OpManager build 123030 and above and ServiceDesk Plus build 9329 and above will support API-based integration. However, old method of integration will also be available to support customers in older version.

Build No - 123029 - November 24, 2017

• NetFlow: Resource type and resource category are set by default to Top N Problems widget in dashboard.
• NetFlow: Default name will get changed based on the category for Top N problem widget in dashboard.
• NetFlow: The mismatch in Row Count for the top source, destination, conversation, application ( L4,L7 ) has been fixed now.
• NetFlow: Redirection issue in Dashboard from network-based (Source network, Destination network) widget has been fixed.
• NetFlow: A new column for DSCP has been added to top conversation widget in dashboard.
• NetFlow: Added an option to redirect from meraki device in device summary widget.
• NetFlow: Redirecting to a particular snapshot with the configured timeframe is proper now and has been fixed.
• NetFlow: Redirecting to snapshot from WLC widgets is proper now and has been fixed.
• NetFlow: Enabling CBQoS policies for more than 2 interfaces has been fixed now.
• NetFlow: Listing interfaces with the index -1 has been fixed now.
• NetFlow: WAAS Total Volume graph plotting and time zone is proper now and has been fixed.
• NetFlow: TimeZone issue for Line graph has been fixed now.
• NetFlow: Updating interface name when the speed is 0 is possible now.
• NetFlow: Individual Graph feature across product is proper now and has been fixed.
• NetFlow: Device traffic graph data in device Snapshot page showing incorrect value has been fixed now.
• NetFlow: Error in displaying time across product when the user and browser timezone differs has been fixed.
• NetFlow: Drill down conversation in QoS shows only 50 records (pagination) has been fixed now.
• NetFlow: “Invalid Device selected” displayed in Raw Data Settings while clicking on Save button has been fixed now.
• NetFlow: Raw data was getting duplicated in the database. Now it has been fixed.

Build No - 123028 - November 22, 2017

• OpManager: In the device snapshot page, Response Time and Packet loss report was not working when the time period exceeded 30 days. This issue is now fixed.
• OpManager: In the device snapshot page, a new icon has been added to navigate to Google Map. This icon is displayed only if the device has been already added to the map.
• OpManager: Under Google Map, the “Filter by Type” option in Google Map, did not list any device types in Central. This issue is now fixed.
• OpManager: Under Google Map, the unmanaged state of the severity icon was displayed as undefined. This is fixed now.
• OpManager: In Google Map, the map position will be retained if user redirects to other pages.

**
Build No - 123027 - November 21, 2017**

Enhancements:

• The ‘Automatic/On-click/No lookup’ options of Resolve DNS in global settings synchronized for all widgets
• Two more SMS service Clickatell and AppSMS supported to send SMS notifications for ‘Alarms, Configuration changes, and Availability Alerts’

Issues Fixed:

• 123396 - If dashboard data is with '\’, in its drilldown page data is shown without ‘\’ . The issue is resolved to display it properly
• 121669 - When Traffic Conversation Table in Interface drilldown page is expanded, it was displaying only top 10 rows. Issue fixed to display complete data
• 123760 - In CCTV view, Operator can view unauthorized device’s Live Traffic. Issue is fixed by hiding it
• 122774 - In one of the 'Proxy Reports’, when Search icon is clicked, empty page was displayed. Issue fixed to display appropriate page
• 123955 - ‘No Data’ message not internationalized in some graphs, issue fixed by internationalizing it.
• 122298 - In dashboard traffic and security statistics report, when Search icon is clicked, empty page was displayed. Issue fixed to display appropriate page
• 124212 - ‘In’ & ‘Out’ legends in Device Summary graph were not internationalized, issue fixed by internationalizing it.
• 121712 - Fixed memory handling issue, during user association and manual IP mapping when device is deleted
• 123826 - Fixed an issue in reimport option of manual IP mapping
• 120736 - Fixed issues in FWA Availability alert page UI and Disable notification link in the alert notification mail
• 122140 - Fixed an issue in script error handling, when a schedule is added for Compliance report without selecting any type of standards
• 125095 - In standard compliance reports, if clicked to drill down the report, the table values are not displayed. Fixed the issue for table value display
• 125093 - User with ‘\’ character could not be added, for ‘End Users’ reports. Fixed the issue to add user
• 123942 - There was an UI alignment issue in NetFlow widget populated in OpManager’s End Users report. Fixed the issue to align the UI
• 122493 - In the dashboard, snapshot view of Cloud Users report, fixed the issue of missing ‘Expand View’ icon
• 124899 - Fixed the issue in Disable notification option of the change management alert notification mail
• 124613 - When TLS option was configured in Mail Server settings, mail notifications for alerts were not sent. Fixed the issue to send mails
• 124090 - Fixed the misalignment issue in Policy Overview report table. This was for MS SQL databse
• 122970 - When a new report type is added with the existing name, ‘Success’ message is displayed. Fixed the issue to display ‘Failed’ message
• 125067 - Fixed the issue to populate rule details of SRX devices, when the configuration file is not having network object details
• 125059 - In the ‘Unused Rules’ report of 'Rule Management’, the resource criteria is not applied properly. Fixed the issue to apply the resource criteria properly
• 4245966 - In FWA, log entries for unsuccessful console login attempt on Cisco ASA devices are not there. Fixed the issue to get entries
• 4206352 - Issue, in SonicWALL log parsing for protocol, is fixed
• 4086698 - All the IPs are not getting resolved into names, when ‘Resolve DNS’ is set to 'Automatic’. Fixed the issue to resolve all IPs
• 4250080 - When scheduled PDF report page count is more than 100, the total page count in PDF footer was not proper. Fixed the issue for proper page count
• 4300246 - Fixed the out of memory error generated when change management report was accessed

Build No - 123026 - November 17, 2017

• An option to associate URL templates to multiple devices from the URL template list has been included.
• An option to view the list of URLs monitors associated to devices has been included in the URL monitors page. Select the Device Specific URLs dropdown to view these monitors.

Build No - 123025 - November 16, 2017

• General: 4139091- User Management - Some users were unable to login the web client after upgrading to the latest service pack. This issue has been now fixed.
• General: 3811324 - When user count exceeded 100, issues were encountered while logging in. This has been fixed now.
• OpManager: Under Notification Profile, email notifications were received as html content, even when plain text format was chosen. This issue is now fixed.
• OpManager: Under Notification Profile, $eventType was not passed in the notification message. This issue is fixed now.
• OpManager: 4099988 - Under notification profile, when html tags were added in the message field, the profile was not saved. This has been fixed now.
• General: SIF upload was not working due to bonitas URL change. This has been fixed now.
• OpManager: 4133567- Under Send Email Notification Profile, while adding special characters in the subject field, the issue where the profile was saved without retaining the special characters or showed errors, has been fixed now.

Build No - 123024 - November 14, 2017

• Under CCTV view, BusinessView did not fit to screen previously. This issue is now fixed.
• Previously, in the device snapshot page, even though the availability of a device was 96%, the dial display was in red color. This issue is now fixed.
• Under Heatmap, device details were not displayed on mouse-over. This issue is now fixed.
• Interface graphs were plotted incorrectly (Graph stack issue, for example, if interface tx is 8 Mbps & Rx is 6 Mbps then we are plotting the graph for 14 Mbps). This has been fixed now.
• The background image was not displayed properly in BusinessViews widget while accessing more than one widget. This issue is now fixed.
• Interface snapshot page, Under Graphs icon -> click on Interface summary graphs -> 95th percentile line was displayed incorrectly.This has been fixed now.
• In business views, LED icons now have a transparent shape instead of a square one.
• 95th percentile min, max, and avg values were missing in the Interface snapshot page. This issue is now fixed.

Build No - 123023 - November 13, 2017

• NCM: Option to clone a device template is provided in GUI.
• NCM: Provided an option to delete existing sysOID in GUI.
• NCM: Schedule actions are removed from device Inventory multi-select actions list and is now added under a new group 'Schedule’.
• NCM: Option to schedule configlets is provided in Configlets list page.
• NCM: 3942442 - Option to retry backup for backup failed devices.
• NCM: 4101225 - Option to add DNS name in reports for application URL instead of IP Address.
• NCM: 4150507 - Search option is provided to select the device in the multi-select box in GUI.
• NCM: Uniform color coding for authorization & unauthorization across the product.
• NCM: Option to edit import devices and values option is provided in the “Configlet Schedule” page.
• NCM: Configuration Change Trend, Compliance Report, Device Audit Report are now provided on the device snapshot page.

Build No - 123022 - November 9, 2017

• OpManager: 3985963 - Multiple Notification Profiles can now be selected and deleted in bulk.
• OpManager: While scheduling a notification profile, the “Do not trigger” option that prevents unnecessary notifications after acknowledging the alarm, can be validated only if the time is set for Delayed Trigger and Trigger Interval.
• OpManager: When configuring notifications from Alarms, the tab that allows the user to select the notification type, was missing previously. This has been fixed now.
• OpManager: Under Device Snapshot page, the notification profiles that have already been associated with the device will be marked as selected, while listing all available notification profiles for association.
• OpManager: A clear error message in the client will be displayed, when a user tries to associate notification profiles without selecting any.
• OpManager: While sending a test mail from the secondary mail server, the primary server message was received, instead of the secondary server message. This has been fixed now.
• OpManager: While adding a new notification profile, configurations of previously added Notification Profile were shown. This issue has been fixed now.
• OpManager: Under SDP Add-on, the “Auto Sync assets” functionality now works seamlessly.

Build No - 123021 - November 8, 2017

• OpManager: When a report created from report builder or snapshot page, is exported to PDF, the device name or the report itself is not properly displayed. This issue has been fixed.
• OpManager: All the data in a report is printed on a single page and when the same is exported to PDF it is improper to view. Now, this issue has been fixed by printing the report in multiple pages for a better view.
• OpManager: Issue in creating a report when it contains a special character. This has been fixed.
• OpManager: Issue in exporting partition details report to PDF. This has been fixed.
• OpManager: Links available in the report for Top N Errors and Discards for device and interface fail to redirect correctly. This issue has been fixed.

(Note: Builds 123016 to 123020 are reserved for internal purpose.)

****Build No - 123015 - Nov 2, 2017****

• OpManager: For default virtual inventory reports in virtual server reports page, Schedule Reports and Send Mail option were not working and was sending blank attachment in the mail. This issue has been fixed now.
• OpManager: For default virtual inventory reports in virtual server reports page, Export as PDF/Excel options were not working. This has been fixed now.
• OpManager: On editing virtual server reports, the Period and Time Window fields were not shown. This has been fixed now.
• OpManager: VMware discover/rediscovery was getting failed when HostPortGroup is duplicated and both the duplicated HostPortGroups are mapped to the same VM/Host. This issue has been fixed now.
• OpManager: If more than one proper credentials for vCenter were added in OpManager, with Auto-VM discovery enabled for one and disabled for the other, then after some time the mapped credential to vCenter/ESX in OpManager was automatically getting changed. This has been fixed now.
• OpManager: The periodic update of VMware vCenter/ESX Inventory in OpManager was not getting properly updated as per configured Update Interval parameter during vCenter/ESX discovery. This has been fixed now.

Build No - 123014 - October 31, 2017

• NetFlow: The issue with export to CSV in inventory has been fixed and enhanced.
• NetFlow: Added an option to export to CSV for NetFlow Group Configurations. This option is added under "Group Settings".

Build No - 123013 - October 27, 2017

• OpManager: While associating "Remote Script Templates", OpManager listed all devices instead of displaying only CLI supported devices. This issue has been fixed now.

• OpManager: IE browser can now support Japanese Characters in Script Templates.

• OpManager: On adding a Syslog rule, The Rearm Match Text was not saved previously. This issue has been fixed now.

• OpManager: The “Test Script” button is now removed from Script Templates for the Central Server, as the scripts are executed only at the probe. These scripts can be tested at the probe.

• OpManager: When a syslog rule was created at the central server, the same was not synced with the probe. This issue is now fixed.

• OpManager: 4190299 - After adding APM plugin to OpManager, APM monitors were not displayed in the device snapshot page. This has been fixed now.

• OpManager: 4244060 - Mail Server settings were not be saved, when “\” was present in UserName field. This issue is fixed now.

Build No - 123012 - October 26, 2017

• OpManager: On editing the threshold of any performance monitors from the device snapshot page, the consecutive times allowed “0” to be given as input. This has been fixed now.
• OpManager: Few build versions of HyperV2016 were not categorized under “HyperV” due to mismatch in the criteria of HyperV related WMI (Win32_OperatingSystem) class. This issue is now fixed.
• OpManager: Too many unnecessary discovery status popups were displayed while receiving VM events from vCenter environment. This led to slowness due to frequently scheduling inventory updates in OpManager. This has been fixed now.
• OpManager: While editing a process monitor from the device snapshot page, when the instance count criteria matched “=” and if the threshold value was set to "0", the Rearm value was automatically set to "0". This issue is now fixed.

Build No - 123011 - October 24, 2017

• Under VLAN snapshot page, the interface list was not displayed previously. This issue is now fixed.
• The privilege of deleting interfaces from device snapshot page is now restricted to only admin users.
• When navigating from Configuration tab to Monitoring tab in Settings, the Add/Associate buttons in the Performance Monitors page were hidden. This issue is now fixed.
• In the device snapshot page, Interface grid data was displayed even after deleting that particular interface. This issue is now fixed.
• Under Basic Settings, when adding a new category, if the name contained other language characters users were unable to delete the custom category. This issue is now fixed.

Build No - 123010 - October 20, 2017

• OpManager: While adding Real-Time Traffic widget from the dashboard, y-axis will now scale to bps, Kbps, Mbps, Gbps automatically based on the data.

Build No - 123009 - October 16, 2017

• NetFlow: The issue with IPv4 address based criteria in Alert Profiles has been fixed for V9/IPFIX/SFlow flow format.
• NetFlow: The issue with Raw Data memory storage when toggle between raw ON and OFF for has been fixed for all databases i.e HighPerf, PGSQL and MS SQL.
• NetFlow: Interface group name was missing in the PDF generated through Schedule Reports. Now, this has been fixed.
• NetFlow: Application drill down & conversation reports from Inventory>>Interface has now mapped required Src and Dst port for application mapping when data fetched from raw data. This issue with port and application mapping has been fixed.
• NetFlow: Now there is an option to send an SMS alert to multiple mobile numbers from “Alert Profiles” tab in Settings.

Build No - 123008 - October 12, 2017

• Firewall: 4180774 – Device rule configuration using SCP protocol was not functioning in build 12300. Now, this issue is fixed.
• Firewall: 124197 – Sometimes, SRX marked as unsupported device, if Firewall Analyzer receives unsupported log as the very first record. Now, wait time is added to check more received logs to avoid unparsed error.
• Firewall: 120221 – Previously, there was no option to view the selected time-period of each dashboard widgets. Now, sub-header details will be shown in each widget with device information along with time-period applied.
• Firewall: 122695 – System performance and custom dashboard views were missing when logged in for the first time. Now the issue is fixed and the user can view both. Firewall: 122785 – Inventory Interface snapshot traffic conversation report’s last row was not shown properly in UI. Now the issue is fixed and the report loads the data properly.
• Firewall: 122055 – Graph units option provided in the Inventory LiveReports page was not in proper sequence. This issue is fixed and the units are now shown in proper order like kbps, Mbps, and Gbps.
• Firewall: 123774 – When the user selects all predefined reports while creating a report profile, received PDF shows all the reports name on the home page without proper alignment. Now, Alert Message added for Report Profile reports selection.
• Firewall: 122683 – Editing widget “Top N Hosts by Traffic” and selecting Protocol under category makes the widget to show data of protocol-group by traffic. Now, the issue is fixed by showing Protocol-Group instead of Protocol in dashboard widget - edit section.
• Firewall: 123865 – ‘Live Syslog Viewer’ status shown as ‘undefined’ when we do a continuous refresh. Now the status message handling issue is fixed on the server side to show proper status in the UI for a continuous refresh.
• Firewall: 124244 – Increased the data dumb volume from base table ‘Firewall Records’ to next level data table for database performance increase.
• NCM: 4094309 – SSH Vulnerability #1: The SSH server is configured to support Cipher Block Chaining (CBC) encryption, which may allow an attacker to recover plaintext message from the ciphertext. We’ve now fixed this by providing an option to disable the CBC mode encryption using system property.
• NCM: 4094309 – SSH Vulnerability #2: The remote server is configured to allow MD5 and 96-bit MAC algorithms, both of which are weak algorithms. We have now fixed this by providing the option to disable these algorithms using system property.
• NCM: 1584237 – Configuration Analysis and Security Audit Reports are now supported for device templates which were not supported in earlier versions.

Build No - 123007 - October 11, 2017

• OpManager: IPSLA monitors were not getting created when the source device does not contain the same notification profiles available in the WAN Threshold template. Now, this has been fixed.
• OpManager: When two or more hop-by-hop widgets are present in one single dashboard, the widgets either collapse or get misaligned. Now, this issues has been fixed.
• OpManager: Search was not working for “Path” field in IPSLA monitor’s inventory page. When searched for values that were present in the middle of a name were not pulled up in the search. Now, this issue has been fixed. Also, now the monitor name is shown upon mouse-hover.
• OpManager: When editing a hop-by-hop widget, instead of highlighting the respective monitor’s name, the one that is listed first was selected. Now, this issue has been fixed and the respective monitor name is selected irrespective of the order.
• OpManager: I18N has been done for the word “Get” in Add URL template page by mistake Now we have removed I18N for the word “Get” because it’s a technical term.
• OpManager: I18N was not done for the word “Edit” in process monitor page. Now it’s been done.

Build No - 123006 - October 9, 2017

• OpManager: 114501/124174 - Option to disable/enable the pop-up that indicates the discovery status.
• OpManager: 122367 - Virtualization related monitors were able to be associated with non-virtual devices also. This issue has been fixed.
• OpManager: 124545 - In the dashboards black color band, “NetFlow” and “transferred” has been misspelled as “Netflow” and "transfered". This has been corrected.
• OpManager: 122340 - Option to configure the polling interval for custom WMI performance monitors was overlooked and because of this, the polling interval time was set to ‘0’ by default. Now we have provided the option to enter the polling interval.
• OpManager: 122294 - When adding a custom SNMP monitor, the “Units” field was still getting displayed even after changing the “Functional exp” filed value to string (“Numeric to string”). This is an issue has been fixed. Now if the value is changed to string, the “Units” field will be hidden.

Build No - 123005 - October 6, 2017

• Under the inventory tab for IP address management, a read-only tree view has been added for easy classification of subnets.
• Under then inventory tab for IP address management, when IP addresses are filtered by the OS category '"Unknown", the list was not loaded. This issue has been fixed.
• Under IP address management, the page loading time for showing the inventory of IP Address, Ports, and Rogue has been improved.
• The changes done in General settings under OpUtils->SPM were not saved in the database. This issue has been fixed.
• When a device that doesn’t support the Bridge-MIB was added for IP address and switch port management, no error message was displayed. Now, if such devices are added, an error message will be shown in the UI.

Build No - 123004 - October 3, 2017

• CCTV crash occurring while resizing the widgets has been fixed.
• Option to Add/Remove widgets included in default dashboards.
• The customization done in a dashboard & CCTV with respect to widgets position and size will be retained across users and browsers.

Build No - 123003 - September 28, 2017

Issues fixed in OpManager:

• For other language installation, iTextAsian.jar file has to be downloaded by the user. This download message has been enhanced and is displayed clearly in OpManager’s UI.
• The display break issue occurring with “Check URL” feature in Workflows, has been fixed
• Issue with sending SNMP traps containing the variable $entity under notification profile, is fixed
• Issue with the WebAlarms widget where no data was available previously due to DB error, is now fixed.
• Issue with the Trap Processor status handling during sorting/navigation under Monitors, is fixed.
• Issue with trap-version while creating trap processor from unsolicited traps, is fixed.
• The period option missing in Availability Reports after upgrading to 12300 build, is included.
• Schedule Reports Top(10,50,100,1000) and bottom(10,50,100,1000) options are now shown properly.

Build No - 123002 - September 20, 2017

Issues fixed in NetFlow module:

• Router display name was not updated while fetching from Router via SNMP has been fixed.
• Search Filter not working in NetFlow inventory has been fixed.

Build No - 123001 - September 7, 2017

Issues fixed in OpManager:

• Google map widget was not loading properly in CCTV and this has been fixed.
• Browser crash issue when CCTV name has a space has been fixed.
• Issue in adding SNMP v1 and v2 credentials in OpUtils has been fixed.

Build No - 12300

Features and Enhancements in OpManager

• 39,070 Vendor Templates have been added - To avoid devices getting added as "’Unknown", vendor templates have been added. Vendor template also includes monitors such as system up time, the number of Network Interfaces, and IP routing discards.
• Windows 2016 device is now supported.
• Microsoft Exchange 2016 is now supported.
• Microsoft Hyper-V 2016 is now supported.
• Tomcat version has been upgraded to 8.5.13.
• HTTP v1.1 has been changed to HTTP v2 for SSL encrypted servlets.
• When adding credentials, OpManager now asks to retype the password to avoid adding wrong credentials by mistake.
• Web client’s loading speed has been improved.
• Google Maps page has been revamped to group devices available in the same coordinates.
• Snapshot pages are now available for VMware datastores.
• Option to discover VMs through vCenter or ESX has been added.
• Option to carry out administrative tasks on VMware Host/VM from respective snapshot pages has been added.
• Test credentials of devices in bulk and also schedule it.
• Performance graphs have been added for file and folder monitors.
• Associate multiple performance monitors to various devices.
• Add a new device via a trap. [Settings-> System Settings-> Discovery]
• VPN Tunnels widgets have been added for ASA firewalls.
• Export PDF option has been introduced for Availability reports and Interface Bandwidth utilization.

Issues fixed in OpManager:

• The issue in updating the modified threshold values in the devices when reapplying the template has been fixed.

• Data collected during one instance is duplicated to other instances for WMI Free/Used disk space and partition monitors. This issues has been fixed.

• Trap alarm message displays OID instead of varbind key even after loading the MIB file has been fixed.

• Rules in Rule Engine getting applied by mistake even though the rule is not satisfied has been fixed.

• The issue with credential password containing special characters has been fixed.

• Issue with adding Process Monitors using bulk select options is fixed.

• For non-English language installations, File/Folder monitor’s Age/Size had few issues with the threshold and rearm with hour/day option. This has been fixed.

• Issue with monitoring MSSQL if the instance name has speical characers( _, $, #) characters, has been fixed.

• Issue with View/Update Rack with the different locale for Non-English OS is fixed.

• Issue with the VM Sprawl data not being visible for VMware is fixed and has been included for HyperV VMs as well.

• Issue with not being able to identify Domain Controller with WMI is fixed.

• Issue with Script Monitors not working with other OS apart from Linux is fixed.

• Authorization issues have been fixed .

• Includes Rack/Floor Status updates.

• CLI Discovery (Telnet) issue fixed.

• Issues Fixed: Interface - When Interface speed exceeds bandwidth, an alarm would be raised.

• Virtual Server inventory reports have been introduced.

• Xen Pool Snapshot to view all the Entities List of a Pool in a single snapshot.

Features and Enhancements in NetFlow

• DPI-based bandwidth monitoring to measure NRT vs ART

• Cisco Meraki is now supported.

• sFlow support for Huawei is now added.

• Tab View for NetFlow is provided.

• Drill down from Dashboard option is included.

• Multi select options for Inventory list view for configuration and reports are added.

• Search in inventory, reports, and settings have been enhanced.

• Option to assign an NCM device for Operator role in both standalone version and collector is now added.

• Option to store raw data for 1 year in Highperf add-in is now provided.

• The subject of email and SMS alerts can now be customized.

• Tools in settings White List for Attacks Module is included.

• PDF/CSV enhancement in inventory snapshot.

• Windows authentication for MSSQL.

• Pagination for Autonomous View.

• Basic Audit reporting NetFlow.

• Customizable Email/SMS subject handled in Alerts.

• Resolve DNS option available from the Dashboard.

• Option to add device from NFA to NCM from inventory list.

• Bulk SNMP assignment is provided.

• Unique name association across OPM and NetFlow.

• Report Linking from Inventory.

• Auto selection of SNMP in netflow if the same device is already available in OPM with SNMP credential.

• SFlow support with dual sampling pool for IN and OUT separately.( SFlow negative value )

• QoS drill down from List view

• Clear DNS cache option.

• Option to select the graph type for traffic widget has been included.

Issues fixed in NetFlow module

• SNMP V3/V2 failure issue fixed Alert Mail fails when there is no authentication provided.
• Display Autonomous View issue is fixed.
• Capacity planning issue - Granularity, 97th percentile, on demand bill generation, units, PDF NFA DE - The issue with utilization showing 0 in interface list, is fixed.
• Multiple E-Mail per threshold issue is fixed.
• SFlow parsing handle for PPPOE flows IPGroup with port range data dump handled.
• The issue in updating the modified threshold values in the devices when reapplying the template has been fixed.

Features and Enhancements in NCM module

• Ability to import new Device Templates using XML file.
• Ability to Edit / Delete Device Templates. Real-time notification of Approval requests.
• Real-time GUI update/auto refresh.
• Export options for Custom Template execution result and Custom Reports introduced.
• User specific Retainable filters and column choosers: Option to show/hide columns in list views.
• Schedule option is added for Configuration upload action.
• Ability to create device group by combining more than one device groups and also dynamically create groups based on predefined rules.
• Possible to add / associate / delete flow export configlets in a Template.
• Also, it is possible to add new Device Identifiers (Device SysObjectId) in a Template manually.

Issues fixed in NCM module

• Sysobject Finder SNMPv3 option provided.
• Issues with creating a user with more than 200 devices associated and not able to create a device group when more than 200 devices selected are fixed.
• The issue with viewing configuration change diff with HTML content is fixed.

Features and Enhancements in Firewall module

• Following devices are supported now:
  • TrendMicro IWSVA 6.5
  • PaloAlto VPN logs
  • Fortigate Management logs
  • SRX Management logs
  • SonicWall_IPSec VPN logs
• ‘Insider Threat’ reports - ‘End User Monitoring’ Add-On.
• Drill-down for all dashboard reports.
• Exclude IP/IP-range/network from reporting feature.
• URL and VPN reports are provided for Inventory report user-drill down.
• Live report for Proxy servers.
• Live report drill-down for device and interfaces from Inventory.
• Interface Live Traffic widgets in Custom-Dashboard.
• End-User widgets in Custom-Dashboard.
• Anomaly-Alerts based on Country.
• User specific reports for Proxy servers.
• Option to export report as CSV on-demand.
• Option to use Management IP address to fetch device configuration.
• Option to configure ‘Row Count’ for on-demand PDF/CSV report export.
• More reports for Rules in Device-snapshot.

Issues fixed in Firewall module

• SRX policy parsing issue fixed for Compliance & Policy Overview report.
• Live Report out-traffic spike based on SNMP fixed.
• Fortigate 5.2.4 Device rule SSH connection issue fixed.
• VPN Usage Trend report issue fixed.
• PDF issue in non-English client side language issue fixed.
• Export to PDF issue fixed for Rule-Reorder recommendation report.
• SNMP V3 configuration issue without community fixed.
• The drill-down issue for Usernames which contains slash in it.

Features and Enhancements in IPAM/SPM module

• Microsoft DHCP Server has been supported. Scheduler scan.
• Custom columns have been added in IPAM & SPM.
• Edit IP details have been added.
• OS Type summary widget has been added in IPAM dashboard.
• NIC Type table has been updated to identify the device vendor.
• Include, Exclude ports pages has been added.

Issues fixed in IPAM/SPM module

• Issue with add switch has been fixed.
• Issue with modify switch has been fixed.
• Issue with IPAM Publish, Scheduler is fixed.
• Issue with viewing configuration change diff with HTML content is fixed.
• Issue with sorting in inventory and search issue is fixed.
• Issue in Tools, TCP reset has been fixed.
• Multiple UI issues have been addressed.

OpManager v12.2 Build No - 12200

Features and Enhancements in OpManager

• Plug-ins such as NetFlow, NCM, and OpUtils are merged with OpManager for unified network management. These plug-ins will now be available as add-ons and no additional download or upgrade is required.
• New API-based web-client that includes integrated dashboards, snapshot pages, alarms, inventory, and reports.
• Support for radius server authentication.
• Enhanced charts and graphs with drill-down and filter options.
• Tomcat has been upgraded to version 8.
• JRE has been upgraded to version 1.7.

Limitation:

• Old struts-based web-client will no longer be available with version 12.2

Features and Enhancements in NetFlow Analyzer

• SNMP V1/V2 Mapping issue fixed.
• End user bandwidth monitoring for MSSQL Handled.
• No data for Last 24 hour fixed Device blank page issue fixed ( Mapping between OPM and NFA fails/ if deleted from OPM/NCM it is handled).
• Inventory view tab blank out issue fixed. Mailserver setting TLS handled.
• SFlow output interface flow processing handled. SNMP default time and retries handled.
• GRE and ESP include/Exclude handled.
• TimeFrame selection in Expanded Widget View Handled properly NetFlow Issue Fixed : Interface Traffic Widget Table data related Changes
• CBQoS Service Policy Tree Map view First Cut provided in Interface Snapshot Page under CBQoS widget. Device ID assignment fixed in Pagination.

Features and Enhancements in Network Configuration Manager

• TFTP Path Disclosure(Vulnerability) fix
• PCI- Deleted User Reviews cannot be Reviewed issue is fixed.
• Configlet schedule PDF attachment issue is fixed
• Unable to backup more than 50 devices issue is fixed.
• Compliance - Rules/RuleGroups not listed when the count is more than 50 issue fixed
• Alarms and Workflows not working issue fixed.
• “write mem” command execution showed failed even though the command execution success in the device.

Features and Enhancements in Firewall Analyzer

• Inventory - Device drill down - Top 10 widgets - If I expand without refreshing the widgets, scroll down option is missing.
• Check-point device dll & opsec.exe not bundled.
• “View All” option missed in all default Reports.
• URL-Report parsing issue fixed for Palo-Alto
• Cisco-Meraki (Proxy) and FireSight device support
• Administrator/ Operator specific page view issues fixed
• Showing two scroll-bar in Security Audit page.

OpManager v11.6 Build No - 11600 (Jun 16th, 2015)

Features and Enhancements

• Scheduled Discovery: Now network discovery can be scheduled to run periodically. Other enhancements include options to
  • Skip interface discovery
  • Select interface type during discovery
  • Select rule engine
  • Configure discovery reports
  • Add filters and rediscovery rules for actions such as adding, deleting, and un-managing devices or interfaces
• VLAN Discovery now supported.
• Device template for UCS system with 24 new monitors has been added.
• In 3D data center floor view, options to add air aisles, walk paths and walls have been added newly.
• Option to generate QR code for the devices on the rack.
• Now racks and floors can be added in the Business view.
• Connect now feature is added in Business Views to import connections from Layer2 map and draw the connections.
• Option to convert TopoMapper Plus to OpManager free version and vice versa has been added newly.
• Submit Feedback option has been added to capture a screen and submit the feedback to OpManager team for enhancements and bug fixes.
• Bulk edit option for editing thresholds and polling intervals of AD, MSSQL & Exchange monitors.
• XenServer monitoring is now available in OpManager.
• Extensive support for monitoring VMware events.
• Full monitoring support for VMware devices via vCenter. The earlier option available to monitor them via ESXi servers is withdrawn. VMware monitoring is supported from version 4.1 only.
• Now OpManager extends showing configuration details of VMware devices to data centers/clusters.
• New dashboards and widgets for virtualization monitoring have been added.
• Option to configure monitoring interval and threshold settings for monitors of virtual servers has been added newly.
• In addition to VM performance monitors for Virtual Servers , full fledged SNMP/WMI/CLI monitors are also supported now.
• OpStor plug-in 9.0 is compatible with 11400 & 11500 only. So Users upgrading from 11500 to 11600, also need to upgrade OpStor plugin to 9.1 version.
• OpStor plug-in 9.1 is compatible with 11600 only. So customers degrading from 11600 also need to degrade to OpStor 9.0 version.

OpManager v11.5 Build No - 11500 (Feb 5th, 2015)

Features and Enhancements

• Schedule Upgrade - Schedule Upgrade helps to stay up-to-date with the latest version of OpManager. Whenever a new version/update gets released, OpManager downloads it and starts upgrading automatically during the time scheduled by you.
• Migration Support:Migration from Enterprise Edition to LEE - OpManager now supports data migration from Enterprise Edition to Large Enterprise Edition. It provides an option to automatically migrate configuration data from OpManager EE (Central server & Probes), and populate in its own DB.
• Migration from Standalone To Enterprise Edition - Users running OpManager standalone edition in PostgreSQL database can now seamlesssly migrate to enterprise edition (i.e) central - probe architecture. Earlier this migration feature was supported only for MySQL and MSSQL databases.
• SMS jar file has been upgraded from version 1.2.1 to 3.5.3. With this version upgrade, two new fields are introduced in the SMS server settings. Users are requested to revisit the SMS server settings in OpManager webclient and set up the configuration once again. To see the list of compatible GSM modems/phones, click here.
• Private Groups in Social IT - Private groups in Social IT allows to carryout discussions on a project within the project members. The admin of the group can invite as many people to join the group. Only the group members will have access to view the discussions that happen in these groups.
• It is now possible to add custom dials for for all the performance monitors listed in device snapshot page.
• Support for monitoring Exchange 2013 environment is newly included in OpManager.
• Email attachment size limit for schedule reports has been increased up to 3MB.
• OpManager 11500 supports monitoring the disk array data hardware status of all the DELL servers.
• Interface templates section has been revamped. Earlier there was a single process for applying and associating templates. But now, it’s been split into two processes - Apply template and Associate template. Associate template allows you to choose values to associate instead of associating all template values to interfaces.
• New SMS Gateway(Clickatell) has been added for receiving SMS alerts.
• To make initial configuration easier, more than 350 device templates are newly added in OpManager.IPSLA monitors are newly added to the notification criteria.
• OpManager 11500 provides option to select the required discovery mechanisms such as CDP, LLDP, IPROUTE and FDB during Layer 2 discoveryA new widget for Layer 2 maps has been addedExchange monitors are discovered automatically if WMI credentials are passed.

OpManager v11.4 Build No - 11400 (Oct 1st, 2014)

1. UCS Monitoring:

UCS Monitoring is an add-on that helps you to monitor all the Cisco UCSes and its components, in your data center. It leverages Cisco UCS XML API to monitor the UCS and instantly notifies you in-case of any fault via email & SMS. Apart from this, the UCS monitor also includes a 2D relationship map that helps you to visualize the relationship among the hosts, clusters, and VMs present in the UCS.

1. Enhancements in network mapping

Network mapping functionality in OpManager has got exciting enhancements such as

• LLDP Support – Helps to enhance automatic network discovery in multivendor networks
• Multiple Subnet Range support - Allows you to add multiple subnet ranges. This helps you to choose the desired network range and map them together
• Some of the other network mapping features that are newly included in Fluidic webclient are :
  1. SNMP V3 support
  2. Option to change Layout
  3. Export to visio
  4. Multiple Parent support
  5. Options to Edit, Update and Delete a network map
  6. Support for L2 Switch as Seed device

1. SIEM Plug-in for OpManager (EventLog Analyzer)

With the help of ELA Plug-in, you can now effortlessly manage terabytes of machine generated logs, monitor file integrity, conduct log forensics analysis, monitor privileged users, comply to different regulatory bodies and instantly generate variety of reports.

It also offers Real-time Event Correlation with over 70+ out-of-the-box correlation rules for proactive threat management and triggers alert notification via E-mail & SMS or Program execution. In-addition you can also set alerts based on specific type of compliance violation for HIPAA, GLBA, PCI-DSS, SOX, FISMA, etc.

1. OpStor Plug-in (Storage Management)

OpStor Plug-in enables you to monitor the storage devices like Storage Arrays, Fabric Switches, Tape Libraries, Tape Drives, Host servers and Host Bus Adapters cards from all leading vendors in the industry. It provides a unified view of storage environment along with effective reporting which in-turn increases visibility and reduces the time taken to detect any faults.

Storage Capacity forecasting helps you to predict the future storage needs by analyzing the usage & traffic utilization trends. Further, the OpStor Plug-in also provides topological map, real-time graphs & various reports on resource utilization, device availability and performance trends.

1. Hardware monitoring support is now available for the Domain Controller category

OpManager v11.3 Build No - 11300 (May 19th, 2014)

1. OpManager now includes the highly productive, faster and API driven user interface by default. The new web client will be the default UI for new installations. However, the existing customers can use the same old client and switch to the new UI anytime.
2. OpManager now includes Social IT- a private social networking medium built exclusively for IT folks. Social IT provides a cascading, Facebook-like wall for threaded discussions enabling real-time collaboration/communication between IT staffers. This Social IT integration is available only in the new API webclient.
3. Now you can configure OpManager to detect event floods and anomalous event rates with predefined rules. Click here to know more about OpManager’s event flood handling functionality.
4. OpManager now supports monitoring of Windows 2012 R2 & HyperV 2012 R2.

OpManager v11.2 Build No - 11200 (Feb 24th, 2014)

Device Discovery in Large Enterprise Edition:

• With the improved Discovery engine, you can now discover up to 20,000 devices in 5 minutes & 1 million interfaces in 1hour
• In Large Enterprise Edition, device discovery will no longer include the discovery of interfaces. For discovering the interfaces, you will have to use the “Interfaces Discovery” section

API Client Enhancements

• Live popup notifications have been added to instantly alert you about the alarms raised
• Now you can make use of the keyboard shortcuts to traverse between device snapshot pages & alerts. You can also use the shortcut keys to pickup/clear/delete any alerts
• With the help of Heat Map, you can now get the status of all the monitored devices in real-time from a single page
• Virtualization maps for VMware & Hyper-V enable you to view the relationships among hosts, clusters, and virtual machines

REST API Enhancements

• Includes support for more than 330 REST APIs

Layer2 Enhancements:

• Discovery of non cisco devices and end nodes (server, desktop) are now supported
• Now you can also draw the Layer2 Maps for the devices which are not discovered/ monitored in OpManager

Other Enhancements:

• Support for iPad App
• ITPulse tab has been removed from the product as it is EOLed

OpManager v11.1 Build No - 11100 (Nov 15th, 2013)

• CMDB Plug-in Support - The Plug-in helps you to get in-depth visibility of your assets present in your IT environment. This allows you to manage all your IT components based on their business criticality and make informed decisions
• Root Cause Analysis - Enterprise IT departments need sophisticated monitoring for each aspect of their operations, from basic infrastructure to bandwidth, applications and change management. However, these sophisticated tools churn out alerts at an alarming rate and volume, making it difficult to manipulate the alerts and find the root cause of the problem. This is now supported in OpManager
• Functional Expression Support - Functional Expression such as Byte to GB, Celsius to Fahrenheit, String to Numeric, Column Min , Column Max, Numeric to String etc are now supported for SNMP based monitors. Option to store or just alert is also provided now.
• Multi language Support - Language selection options such as Chinese, Japanese, French, Korean etc. are provided in the OpManager webclient
• Notification Profile / Alarm Escalation
  • Option to view the latest Polled Value available for recurring notification and escalation mails
  • Alarm Entity parameter is available now for notification
• Pass Through Authentication support is available now
• Security vulnerability in Postgres database is addressed now.
• Reports - A new report to list all the threshold configured devices is available now
• Around 75 device types are newly added
• Alarm Suppression Configuration is audited now
• Regular expression support provided for Event Log description
• Infrastructure Widget - Option not to show a particular category , if there is no devices present is addressed now

OpManager v11 Build No - 11000 (September 30th, 2013)

OpManager Large Enterprise Edition Release:

1. A single OpManager Large Enterprise Edition server can hold up to 50,000 devices or 1 million interfaces in a single box. It is twenty times more scalable than the enterprise edition.
2. Has twenty times faster discovery engine - Discovers 20,000 servers in 5 mins.
3. Integrated Layer2 Discovery with automated dependency to avoid false alarms.
4. New API client released as THEME for opmanager. Completely built with Ember.js and APIs. Works ten times faster with real-time updates.
5. Multi Language Support.

OpManager v10 Build No - 10200 (July 22nd, 2013)****Widgets

1. In Performance Monitor widget, Sort Column option is added in Top N Monitored Values
2. Business View Summary widget now includes alarm count and list of devices in business view
3. Option to choose a dashboard when creating new tab
4. Embed widget option to hide headers
5. Open CCTV View link from Manage CCTV page
6. Last Polled Value time period option in following widgets

• Devices by CPU Utilization
• Devices by Memory Utilization
• Devices exceeding N % CPU Utilization
• Devices exceeding N % Memory Utilization
• Top N Min/Max/Average CPU Utilization
• Top N Min/Max/Average Memory Utilization

Schedule Reports

Notification subjects and messages can be configured by the user. Default parameters are Scheduler Name, Report Description, Report Period, Report URL etc.

Rule Engine

1. Support for MSSQL monitors & URL Monitors are provided in Rule Engine.
2. Provision to add a URL as templates is available now.

**MSSQL Monitors **

In MSSQL device snapshot page, Delete Option is provided in MSSQL Instances and MSSQL databases.

Archiving

Option to Re Run Archiving is newly added in the Database maintenance page. This feature will be useful in-case the hourly or daily archiving is missed due various reasons such as server maintenance shutdown, database disconnection etc.

Workflows

NCM Plugin actions such as Backup, Execute command, Execute template, GetLast N Changes are added as Workflows.

Hardware Monitors

1. Option to enable/ disable hardware monitors is added
2. Option to suppress alarms for hardware monitors is supported now

Device Templates

1. Option to configure Sys Description is added
2. Operators such as Equals, Not Equals, Contains, Not Contains, Ends with, Starts with etc are now supported in device templates
3. Option to export and import device templates with multiple rules is provided.

Tabs

New tab link ‘All Devices by Disk Usage’ is added under Maps tab, with the filtering option and the option to delete drives

Maps

Option to set the view as default for SLA Dashboard is added

Reports

Interface aggregate data graphs are added in the new Opmanager API Client

OpManager v10 – Build No - 10100 (May 7th, 2013)

1. With OpManager’s new 3D Data Center Builder, you can virtually create an exact model of your racks and data centers. You can embed these datacenter designs on your NOC screens and monitor them 24x7 from anywhere, anytime. The 3D data center can also be viewed from iPad and other tablets.
2. A high productive, ultra-fast, responsive, API driven new UI is ready to use. Built completely on a new JavaScript framework it offers you 10x more productivity than the previous one.
3. You can now avail APM plugin in OpManager central webclient also. Previously the plugin was available only in the standalone version.
4. Now you can make you of APC PDU (Series 7800/ 7830 / 8841/8858 / 8858NA3) templates which are newly added to list of OpManager device templates. With the help of these templates, you can monitor parameters such as PDU Phases, PDU Power/Phase Load, PDU Voltage, PDU Bank Load & many more

OpManager v10 – Build No - 10000 (March 18th, 2013)

1. Now OpManager provides support for monitoring IPv6 network devices and servers. After discovery, device templates along with the essential monitors are applied on the IPv6 devices and monitored for performance.
2. Applications Monitoring plugin for in-depth monitoring of applications such as Oracle, SAP, Sharepoint, Websphere and much more has been added now.
3. Get granular insight into your VMware environment, as OpManager now monitors VMware ESX/ESXi and VMs through vCenter via vSphere API.
4. Now OpManager out-of-the-box monitors hardware health such as temperature, voltage, power, fan speed, status of processors, storage, memory, disk arrays, etc. of HP, Dell, Cisco and Juniper devices, via SNMP. OpManager also supports hardware monitoring for ESX hosts via vSphere API.
5. Failover support for OpManager Central server has been added now. Probe already includes support for failover.
6. Now raise a ticket with OpManager support along with the support information file, in a single click (Support-> Request Support).
7. Adding notes to an alarm has been simplified now. In alarms page, now you can add alarm notes by clicking ontem the “Note addition button” present beside each alarm notification. You can also add alarm notes in bulk by selecting the desired alarm notes and clicking on “Add note” button.
8. In Enterprise Edition, the intelligence to detect build mismatch between Probe and Central has been added.
9. Time Window option has been added in Schedule Reports page (Issue ID 91998)
10. Time out and max hops are now supported in TraceRoute in both RestAPI and Workflows.
11. Search filtering option added in All Devices and All Interfaces page

OpManager v9 – Build No - 9400 (November 29th, 2012)

1. iPhone App for OpManager: Connect to OpManager server and view the performance of all the devices, recent alarms, and business views from your iPhone. Download the App now.
2. OpManager supports monitoring Windows 8, Windows 2012, and MS SQL 2012.
3. OpManager supports monitoring NetApp storage devices. [Watch Video]
4. Now authorize AD group users with different access privileges to access OpManager web-client with the new AD authentication feature. [Instructions to configure]
5. A seamless integration with ManageEngine ITPulse, the private social network for IT. OpManager will posts event status automatically in ITPulse, when a technician acknowledges, unacknowledges, or clears an alarm in OpManager. You can also view the details of such alarms from ITPulse itself and discuss the troubleshooting steps. [Watch Video]
6. The NCM plugin data and reports can be added as widgets in the dashboard page. Also OpManager now raises alarm for change detection and backup operations done by the plugin.
7. OpManager now includes option to view config changes, execute backup/commands from the device snapshot and alarm pages itself.
8. New APIs are available for listing the alarms and devices, triggering a notification profile, and more.
9. OpManager provides option to execute notifications and workflow repeatedly until an alarm gets cleared.
10. To avert false positives, the consecutive times check for status polling is now extended to service monitors, Windows service monitors, interface poll and event log monitors.

Virtualization (VMware & Hyper-V)

1. OpManager includes provision to add event log rules on Hyper-V host server.
2. OpManager includes option to create custom WMI monitors form Hyper-V host and Virtual machines from their respective device template page.
3. OpManager now supports changing the category of virtual devices.
4. IT Automation tab with options to view and create workflows has been introduced in ESX & Hyper-V server snapshot page.

API

1. API now supports JSON output in addition to XML format.
2. In ‘Associate device to Notification Profile’ API, an option to provide the list of thresholds has been added.
3. In ‘Add Device’ API, you can now provide the device type and display name in addition to the device name.
4. Support for associating multiple devices has been added in ‘Add device to Business View’ API.

Workflow

1. Workflow supports new actions like creating OpManager alarms and folder. And also provides wildcard support for file related tasks.
2. The admins can now forcefully shutdown/reboot/logoff the remote machine using shutdown task option in Workflow.
3. Delete older files option in Workflows can now check and delete older files in subfolder also.
4. System Settings
5. OpManager now includes options to configure Date/Time format and also enable logging at runtime, under Admin -> System Settings.

**
Business view**

1. In Business view, now you can zoom in/out.
2. Option to enable/disable traffic arrows for the links is provided now.
3. It is now possible to associate a link to multiple devices in a business view.

**
Others**

1. Options have been included to create charts with data points, stacked area chart and to show the threshold value line in the graph.
2. Separate Alarm is raised for Status Poll, Service down and Windows Service down for better clarity and granular notification handling.
3. Now devices notes can be added in bulk via a CSV import.
4. Option provided to bind OpManager to a particular IP address of the server instead of all IP addresses in the machine.
5. Process monitoring feature is now enhanced to monitor, alert and report on absolute value of process memory in addition to percentage utilization.
6. Delete all option provided to purge the Unsolicited Trap.
7. Discovery Rule Engine now has option to manually rerun the rules against a set of devices.
8. Device Templates has been enhanced to provide a custom OID check in addition to SYSOID for classification.
9. Regex support is now provided for String based threshold setting.
10. The traps raised from the IP address can now be mapped to the source server with option to configure the IPMI address for SNMP traps.
11. License changes - Only managed devices are counted for license.
12. WebAlarm link is now included in CCTV view.

OpManager v9 – Build No - 9200 (July 10th, 2012)

1. IPAM Plugin *: IP Address Management plug-in helps you manage your IP Address. It also includes Switch Port Mapper to identify the switch port to which a device is connected.
2. Discovery Rule Engine: Automate actions such as adding monitors, associating the devices to a business, etc. that you carry out after adding the devices to OpManager.
3. Tab Customization: Customize OpManager web client by creating tabs for frequently visited pages, third-party embeds, reports, etc. and navigate easily in a click. You can also modify and delete existing tabs.
4. Multiple Threshold support: Configure multiple thresholds for the performance monitors. You can now set multi-level performance thresholds for a monitor and alert at different levels.
5. Log File Monitoring *: - Agent based: Monitor log files of mission critical applications such as MSSQL, Oracle, etc. in real-time. The agent constantly monitors the log files for content that may even be a regex.
6. New Audit Report and Enhancements to Monitor Health Report: Get real-time security audit report in OpManager at a mouse click, and also experience some of the high end enhancements made to monitor device health report.
7. You can now forward Traps and Syslog events from OpManager to any other NMS through Trap/Syslog Forwarder from OpManager GUI.
8. The new improved network discovery engine is 5x faster and discovers over 5,000 interfaces in a minute.
9. Faster Discovery Enhancements.
10. Support for VMware UUID & Replicated VM’s.
11. Configurable options are provided in SDP to create new ticket or reopen existing ticket on reoccurrence of an alert.
12. New VMware reports for Datastore Top Read & Write Latency are included.
13. New Workflow action “Refresh Datastore” is added to the list of several workflow actions.
14. Configurable Timeout option is included in Mail Server Settings.
15. Option is provided to enable protocol level logging at runtime in System Settings.
16. More enhanced rebranding changes are made configurable via brandprops.properties file.
17. New Category “Storage” has been added to device category list.
18. New device templates are included for NetApp/Cisco Routers.

OpManager v9 – Build No - 9100 (March 1st, 2012)

1. Major enhancements have gone into the Map Maker which includes curved lines, localized names, customized line thickness, easy drag-drop etc.
2. The long-awaiting option to export and import device templates and share them with the community, is now available. The shared device, workflow, and script templates are listed under the RESOURCES tab in our forums. The shared template are validated and approved before displaying them here.
3. Support for Korean language installation is provided.
4. SSH key authentication for monitoring Unix-based devices, can now be given as file inputs., viz. instead of specifying the user name and password in the OpManager credentials GUI, you can store them in a file and give the file as authentication input.
5. Option to provide timeout in CLI credentials added.
6. You can now test the authentication credentials for multiple devices at one go, instead of testing it for each device.
7. Keep a tab on the monitors for which data is not collected for a specified period by accessing Support Diagnostics GUI.
8. The credentials configured are now grouped by the Protocol and listed for easy manageability. For instance, you’ll see the grouping when adding a new device for discovery.
9. A new device template is included for Cisco5508WLC devices.
10. When configuring trap processors, you’ll be able to select up-to the 20 Varbinds as part of the match criteria.
11. New graph Memory Utilization (UCD SNMP MIB) is added by default.

OpManager v9 – Build No - 9011 (January 5th, 2012)

If OpManager detects a DB collation mismatch during PPM upgrade, a system alert is shown to avoid partial upgrades.

OpManager v9 – Build No - 9000

1. IT Automation Workflows to automate 1st and 2nd level administrative tasks. Few pre-built workflows available out-of-the-box, and intuitive drag and drop GUI to create more custom workflows.
2. A hot-standby for Probe to ensure high availability. Seamless failover and failback between the primary and secondary probes and 100% data integrity.
3. REST API support in OpManager to help integrate with third-party help desk, NMS etc; operations supported include adding a device, adding a notification profile etc.
4. Define custom scripts and leverage OpManager’s fault management to the fullest. Supported scripts include Powershell, Linux shell script, VBScript, Phython & Perl.
5. Virtualization management support now extended to Hyper-V devices in addition to VMwares; monitor over 70 deep metrics!
6. The GUI has got a new face-lift with new tabs organization for easier and intuitive navigation.
7. Quick links are included to access help on how to configure tasks in OpManager and perform first level troubleshooting. These can be enabled/disabled from Admin > System settings.
8. Support for NFA and NCM plug-ins in Probe (Enterprise edition).
9. NFA plug-in now supports 64 bit Windows and Linux installation.
10. Dashboards are introduced for Business View users.
11. Configurable color coding is included for Utilization widgets (Red for over 90%, Yellow for over 80%) [ Editable range value (Top 10,12,15) for widgets. (Previously it was a drop down box Top 10, 25, 50)]
12. An option to specify the consecutive number of times a device is polled/threshold is violated, is included in the device templates specific to Virtual devices.
13. You can now edit the threshold type/value of resources defined in the Virtual Machine device templates.
14. It is now possible to edit and save the IP address from the ESX Host snapshot page.
15. If you want to configure bulk URL monitors, you can specify the links in a CSV file and bulk-import them into OpManager at one go!
16. The folder monitoring feature enhancement includes wildcard (file filtering) option.
17. Sixteen new templates are included for A10 networks & blackberry devices!
18. An option is included to apply a change made in the interface template to all interfaces.
19. An option to rediscover the interfaces that are deleted from the device, is included.
20. A list-view is now available for Exchange servers with an option to add a server into exchange category directly.
21. The AMS validity is shown in the GUI with a link leading to renewal procedure.
22. New dashboards are included to show top 10 server and top 10 networks.
23. An automatic notification is triggered when the Probe is down (Enterprise edition).
24. A ‘View Associations’ option is included in Admin > Notification Profiles screen to quickly see a summary of the different profiles associated to the monitored devices.
25. A new device down time report is provided. The report also shows the outage history.
26. Localization support is extended to have the Probe name in Japanese or Chinese (in the respective local installations).
27. You can now add Probes in the Google Map.
28. An option is provided to enable/disable the discovery of a VM in a host.
29. For VMs that are also DomainControllers, the snapshot page is enhanced to show the interface details in two different tabs, one for the Virtual NICs and the Interfaces.
30. The performance monitor widgets now show the instance name in addition to the device name.
31. A new device template is included for Windows 2008 R2.
32. When configuring alarm escalation or when scheduling a report, you can now select the site too (specific to Enterprise edition).

OpManager v8 – Build No - 8812 (August 17, 2011)

1. The Alarm reports page now has option to filter alarms based on its properties; This report can be exported to .pdf, excel formats and can be emailed.
2. Option to escalate alarms via SMS in addition to email, is included. Option to configure URLs in Alarm Escalation is also added.
3. You can now associate any type of notification profile to a particular or to a group of URL Monitor. This functionality is available under the individual URL monitor page and at the “Quick Configuration Wizard” option.
4. You can now edit or update or add new mail store location for Exchange monitors.
5. Google map integration is enhanced now to show the location of the device both in the Google Map as well as in the Google Map widget.
6. Device search option is now extended to search “interfaces” using interface name or IP address and for "URLs".
7. When polling devices using ICMP ping for availability, choose which round-trip-time metric (Minimum⁄ Maximum⁄ Average response time) you want to show as Device Response Time under device availability. By default OpManager shows the average response time and you can change this now by editing Ping.properties file.
8. A new widget is added to show the total bytes transferred.
9. When reports are scheduled and emailed, the users with non-admin privilege can also access and view the reports.
10. Alarm ID is now configurable in the notification profile both, as part of the subject or/and the message.
11. In the device template "list of monitors", a multiple-select check box is provided against each group of monitors. The same option is available while associating monitors from the device snapshot page.

OpManager v8 – Build No - 8810 (May 9, 2011)

1. VMware ESX⁄ESXi version 4.1 is now supported.
2. View the domain controller dashboard in VM snapshot page.
3. Apply warning and error thresholds across multiple ESX hosts and VMs using Device templates.
4. NFS datastore reports are added for ESX v 4.1. Generate reports such as Disk Read Speed, Disk Write Speed, Write Latency, etc. on datastore.
5. Discover VMs also using the “Add Device” option under the “Admin” tab.
6. Get more meaningful and actionable SNMP Traps by processing every Varbind with intelligent processor.
7. Port⁄ Interface monitoring has been enhanced for better performance.
8. Embed OpManager dashboard widgets as iframes into other sites
9. Network rediscovery now shows split–up of already discovered devices and new devices count.
10. Web client page loading time is now displayed in every page.
11. Options are included to change the Traffic Counter (32⁄ 64 bit) at individual interface level.
12. Interface parameter (ifalias) can be updated in OpManager by performing interface rediscovery operation.
13. UTF–8 Unicode is now supported in OpManager.
14. UPS interface details are monitored and shown now.

OpManager v8 – Build No - 8723 (February 15, 2011)

1. Community page enhanced to reflect industry benchmarks for resource performance.
2. An option is included to configure subject for the email–based SMS profile.
3. Provision to add STM files besides .edb in Exchange Mail and public store.
4. A new report to reflect total bytes transferred is included in the Reports tab.
5. You can now specify match criteria for threshold values in the Interface templates.
6. Interface properties ⁄ Custom fields for interfaces are added in notification profiles.
7. Interface snap shot page refreshes now based on the refresh interval configured in the ‘Personalize’ settings.
8. All Interfaces⁄Utilization reports are enhanced to show the links capacity. Columns are included to show Inspeed and OutSpeed values
9. A new Widget is included to display tips to troubleshoot and workaround some configurations and tweaks in OpManager.

OpManager v8 – Build No - 8722 (December 27, 2010)

1. Support for adding non ping-able device is included now.
2. Support for scheduling downtime for consecutive days is provided in Monthly Day-wise option.
3. WAN link report has a link to the interface and device snap shot page.
4. Domain Controller category is now listed in URL response widget.
5. Process monitoring - Down alert is generated if the instance count is 0 and ‘consecutive times’ field is configured.
6. Device Templates now have a ‘Copy As’ option to enable saving the same template under a different name.
7. During Failover, email notifications are sent when:

• The Standby server is not started.
• Data replication process is not completed during standby server startup.
• If data replication fails during take over.
• Appropriate message is shown to the user, if the client is connected to standby server in standby mode.

OpManager v8 – Build No - 8721 (August 30, 2010)

1. The Downtime Scheduler now has an option to schedule a downtime on a monthly basis
2. Monitoring of Exchange 2010 is now supported
3. The notification criteria for the Printer and UPS includes variables like paper jam, low toner, low battery etc.
4. The threshold configuration now allows you to select ‘Not Equals’ as a match condition
5. OpManager Webclient, if invoked before the OpManager server process, reflects the status of OpManager process
6. The reason for a credential failure is shown on clicking the Test Credentials button
7. More time options such as 1, 2 , 4, 6 hours have been included in Widgets
8. New widgets are included to show devices and services that are down, and also to show the business view traffic map
9. An email notification is sent when OpManager loses connection to the database
10. If the Syslog port is occupied, a message to this effect is shown in the Syslog Rules page
11. A hyperlink to the alarm details page is added in the notification mail message
12. The About page shows the latest build number available for download on the OpManager website

OpManager v8 – Build No - 8720 (July 16, 2010)

1. Exhaustive ESX VMware Monitoring using VMware APIs. Supports monitoring ESX 3.5, ESX3.5i, ESX4 and ESX4i
2. Automatic Layer 2/ Layer 3 network mapping
3. Supports configuring Mail server with ssl support
4. New collection of widgets for Service and Process Monitoring added
5. New set of device templates and monitors included
6. Category ‘Unknown’ has been introduced
7. NetFlow plugin version 8000 released. Click here to upgrade to the latest NetFlow plugin release.
8. NCM plugin version 5500 released. Click here to upgrade to the latest NCM plugin release.

OpManager v8 – Build No - 8052 (Apr 27, 2010)

1. A new CLI-based monitor for partition details of a device is included.
2. Alarm Details page has been enhanced to show the name of the log rule that triggered alarms (for Syslogs, Event Logs, and SNMP Trap based alarms). You can also edit the rule from this page.
3. The status of a Downtime Scheduler (in progress or not) is now shown in the schedule listing page.
4. You can now revert a re–branded installation of OpManager to the original settings that will default to OpManager logo and images.

OpManager v8 – Build No - 8051 (Mar 2, 2010)

1. Link to OpManager Community portal is included as a separate tab.
2. Support extended for managing Windows 7 devices.

OpManager v8 – Build No - 8050 (Jan 8, 2010)

1. Data is collected every 5 minutes in the WAN RTT Monitor
2. Hop graphs are now shown for every RTT path from source to destination
3. Data is collected every 5 minutes in the VoIP Monitor
4. OpManager now supports 64-bit OS
5. File and folder monitoring for Windows devices
6. Provision to create custom WMI monitors in addition to the already available SNMP-based custom monitors. You can also associate these monitors from the device templates
7. Users can now access the OpManager web client using iPhone or Blackberry user interfaces
8. A new network traffic map to let you quickly identify highly utilized network links
9. OpManager now also alerts via Twitter Direct Messages
10. More device templates included taking the templates count to over 650 device types out-of-the-box
11. Provision to monitor custom event log categories in addition to the default Windows event logs
12. Reports enhanced to include NT Services and Process availability reports
13. Scheduled reports are now available for all reports and monitors
14. Support to export reports as Excel files now extended to all the in-built reports

OpManager v8 – Build No - 8025 (Nov 23, 2009)

1. Alarm Notifications Include alerting through RSS feeds
2. Provision to edit existing user privileges

OpManager v8 – Build No - 8024 (Oct 9, 2009)

1. The tools in the Device Snapshot page now includes SSH⁄ HTTPs options
2. Export of Switch Port Mapper Reports as PDF or Excel files. Option to send the report via email also included.
3. Ability to send SMS if the OpManager server loses network connectivity.

OpManager v8 – Build No - 8022 (Aug 11, 2009)

1. Notification Profile: In addition to ‘Custom Fields for Devices’ and ‘Alarm Variables’, ‘Device Properties’ such as Device Type, Device State, RAM, Disk, IPAddress etc. can now be added to all the notification profiles
2. Notification Profile: Option to add ‘Custom Fields for Devices’ and ‘Device Properties’ as arguments for Run System /Run Program command
3. Option to select the required Devices is provided in the MIB Browser
4. Provision to set the ‘List View’ as default map view
5. Option to view the current downtime details in the Outage History reports
6. Interface Real time graphs will be shown by default for all the users, irrespective of license applied
7. The Netflow dashboard can now be seen from the OpManager webclient if the Netflow plugin is installed

OpManager v8 –Build No - 8021

1. Enhanced Alarm actions: Option to perform Ping, Trace Route, Test Monitor, Actions, Manage/ Unmanage devices, RDP & much more for every alarm.
2. Email Notification will have a link to device snapshot page for faster access to OpManager web-client
3. Ability to add Google maps to Custom Dashboards
4. Option to sort entries in Infrastructure view widget
5. WMI–based partition details are added out–of–the–box

OpManager v8 –Build No - 8020

1. Alarm Suppression: Suppress the alarms of a specific device for a pre-defined time interval.
2. Faster Backup and Restore utilities
3. I18N Internationalization issues fixed (For Japanese and Chinese Language)

OpManager v8 –Build No - 8007

1. Provision to add Telnet/SSH port number for devices discovered/monitored though CLI.
2. A new option to configure the consecutive times when the alarm should be generated has been added for URL monitors
3. Option to view the Real time graphs for the premium license users
4. SLA Dashboard now shows for business views
5. Option to configure Notification for interfaces belonging to Servers and Desktop category has been added
6. In the device snap shot page, instead of average data the latest collected traffic data is now shown
7. Configure tab option added in the interface snap shot page
8. Bar image option added in All servers disk usage report
9. Default monitors added for MGE and TrippLite type UPS
10. Provision to view the “About” and “Register” link is removed for Read only users
11. Interface name with special character are listed in customizable dashboard widgets
12. Option to monitor the cumulative resource usage for VMware server is enabled, even without the add-on license. (Note: VMware Dashboard still requires add-on licensing)

OpManager v8 –Build No - 8000

1. Plug-in for Network Configuration Management (NCCM).
2. Syslog Monitoring.
3. More performance monitors for Windows infrastructure.
4. Customizable dashboards.
5. Plasma TV/CCTV View.
6. List view or Bulk configuration view.
7. Real time graphs for performance Monitors (CPU, Memory, Disk & etc.)
8. Real time Traffic and Bandwidth graphs.
9. More Device Tools (RDP, Telnet apart from Weblinks, Trace Route, Ping and etc).
10. Process Monitoring Template.
11. Superior Interface Snapshot page.
12. Enhanced Reports.
13. Failover Support.
14. Intro Tab - To facilitate fast deployment of OpManager.

OpManager v7 –Build No - 7204

1. Support for VoIP Monitoring.
2. Plug in for NetFlow monitoring.
3. All new revamped WAN RTT Monitoring (IP SLA based WAN Monitoring).
4. Over 300 new Device templates have been added.
5. Support for integrating NetFlow Analyzer Enterprise Edition (configurable from Admin-> Add-On/Product Settings).
6. Option to configure ICMP ping to the devices using IP Address or DNS Name. (NOTE - The option is provided in ServerParameters.conf file in OpManager\conf folder).
7. Option to select the Exchange server version (2003 or 2007) while configuring the exchange monitors.
8. Provision to add notes on Alarm messages for read only users.
9. Provision to configure the username/password in DBManager, if there is a change in Database credentials.
10. Ability to configure thresholds even for negative value monitors.
11. Support for monitoring OID of type Time-Ticks.

OpManager v7 –Build No - 7202

1. Ability for the devices in the Custom category to inherit the properties of another selected category.
2. Monitoring and installation support for Windows 2008. A separate device template is also included for Windows 2008.
3. Availability Reports showing the uptime/downtime in day-wise, by hours etc.
4. Provision to delete custom monitors.
5. Option to view current day’s data in Active connections / mobile users / temperature monitors in the snapshot page.

OpManager v7 –Build No - 7200

1. SNMPv3 support.
2. String OID monitoring.
3. Process Monitoring in Windows and Linux devices.
4. Schedule the reports and export to Excel format.
5. Availability reports - Displays onhold, parent down, dependent unavailable, on maintenance parameters of the devices.
6. Generate Time based availability reports.
7. Sys OIDs are added for the following series Cisco 2800, Catalyst 3750, Cisco PIX.
8. Enhanced Webclient Performance wrt Mysql Database. Reduced the number of queries to access a device snapshot page.

OpManager v7 –Build No - 7100

1. Add-on for monitoring VMware ESX Servers.
2. Discover devices by importing from a CSV file.
3. Process monitoring on Windows Servers and Desktops.
4. Web-alarm enabling users to be notified of a fault.
5. Determining device availability using TCP Port checks.
6. Provision to add a device directly into a category.
7. Provision to add custom links to devices for ready reference.
8. Provision to select a time-window for a notification to be sent.
9. Exporting reports to XLS file format.
10. Alarm escalation policies can be configured for all devices in a business view.
11. Enhanced switch port mapper showing the ports-devices mapping information.
12. URL password is now in encrypted format.
13. Enhanced the min/max values displayed in the interface reports.
14. MSSQL DB password is now in encrypted format.
15. Top 1000 Reports option is included in scheduled reports.