A vulnerability in the Cisco Discovery Protocol processing feature of Cisco IP Phone 7800 and 8800 Series firmware could allow an unauthenticated, adjacent attacker to cause a stack overflow on an affected device. This vulnerability is due to insufficient input validation of received Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol traffic to an affected device. A successful exploit could allow the attacker to cause a stack overflow, resulting in possible remote code execution or a denial of service (DoS) condition on an affected device.

*   Cisco will release free software updates that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.
    
    Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:  
    https://www.cisco.com/c/en/us/products/end-user-license-agreement.html
    
    Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
    
    The Cisco Support and Downloads page on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.
    
    When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.
    
    In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
    
    **Customers Without Service Contracts**
    
    Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html
    
    Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
    
    **Fixed Releases**
    
    In the following table(s), the left column lists Cisco software releases. The right column indicates whether a release is affected by the vulnerability that is described in this advisory and the first release that includes the fix for this vulnerability. Customers are advised to upgrade to an appropriate fixed software release as indicated in this section.
    
    Cisco IP Phone Firmware Release
    
    First Fixed Release
    
    14.2 and earlier
    
    14.2(1) (Jan 2023)
    
    The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.

CVE-2022-20968: Cisco Security Advisory: Cisco IP Phone 7800 and 8800 Series Cisco Discovery Protocol Stack Overflow Vulnerability

Jenkins Google Login Plugin 1.4 through 1.6 (both inclusive) improperly determines that a redirect URL after login is legitimately pointing to Jenkins.

This advisory announces vulnerabilities in the following Jenkins deliverables:

*   Checkmarx Plugin
*   Custom Build Properties Plugin
*   Gitea Plugin
*   Google Login Plugin
*   Plot Plugin
*   Sonar Gerrit Plugin
*   Spring Config Plugin

**Descriptions****XXE vulnerability in Plot Plugin**

**SECURITY-2940 / CVE-2022-46682**  
**Severity (CVSS):** High  
**Affected plugin: plot**  
**Description:**

Plot Plugin 2.1.11 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks.

This allows attackers able to control XML input files for the 'Plot build data' build step to have Jenkins parse a crafted file that uses external entities for extraction of secrets from the Jenkins controller or server-side request forgery.

Plot Plugin 2.1.12 disables external entity resolution for its XML parser.

**Open redirect vulnerability in Google Login Plugin**

**SECURITY-2967 / CVE-2022-46683**  
**Severity (CVSS):** Medium  
**Affected plugin: google-login**  
**Description:**

Google Login Plugin 1.4 through 1.6 (both inclusive) improperly determines that a redirect URL after login is legitimately pointing to Jenkins.

This allows attackers to perform phishing attacks by having users go to a Jenkins URL that will forward them to a different site after successful authentication.

Google Login Plugin 1.7 only redirects to relative (Jenkins) URLs.

**Stored XSS vulnerability in Checkmarx Plugin**

**SECURITY-2869 / CVE-2022-46684**  
**Severity (CVSS):** High  
**Affected plugin: checkmarx**  
**Description:**

Checkmarx Plugin processes Checkmarx service API responses and generates HTML reports from them for rendering on the Jenkins UI.

Checkmarx Plugin 2022.3.3 and earlier does not escape values returned from the Checkmarx service API before inserting them into HTML reports. This results in a stored cross-site scripting (XSS) vulnerability.

While Jenkins users without Overall/Administer permission are not allowed to configure the URL to the Checkmarx service, this could still be exploited via man-in-the-middle attacks.

Checkmarx Plugin 2022.4.3 escapes values returned from the Checkmarx service API before inserting them into HTML reports.

**Improper credentials masking in Gitea Plugin**

**SECURITY-2661 / CVE-2022-46685**  
**Severity (CVSS):** Medium  
**Affected plugin: gitea**  
**Description:**

Gitea Plugin support authentication with Gitea personal access tokens.

In Gitea Plugin 1.4.4 and earlier, the implementation of these tokens did not support credentials masking. This can expose Gitea personal access tokens in the build log, e.g., when printed as part of repository URLs.

Gitea Plugin 1.4.5 adds support for masking of Gitea personal access tokens.

Administrators unable to update are advised to use SSH checkout instead.

**Stored XSS vulnerability in Custom Build Properties Plugin**

**SECURITY-2810 / CVE-2022-46686**  
**Severity (CVSS):** High  
**Affected plugin: custom-build-properties**  
**Description:**

Custom Build Properties Plugin 2.79.vc095ccc85094 and earlier does not escape property values and build display names on the Custom Build Properties and Build Summary pages.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers able to set or change these values.

Custom Build Properties Plugin 2.82.v16d5b\_d3590c7 escapes property values and build display names on the Custom Build Properties and Build Summary pages.

**Stored XSS vulnerability in Spring Config Plugin**

**SECURITY-2814 / CVE-2022-46687**  
**Severity (CVSS):** High  
**Affected plugin: spring-config**  
**Description:**

Spring Config Plugin 2.0.0 and earlier does not escape build display names shown on the Spring Config view.

This results in a stored cross-site scripting (XSS) vulnerability exploitable by attackers able to change build display names.

Spring Config Plugin 2.0.1 escapes build display names shown on the Spring Config view.

**CSRF vulnerability in Sonar Gerrit Plugin**

**SECURITY-1002 / CVE-2022-46688**  
**Severity (CVSS):** Medium  
**Affected plugin: sonar-gerrit**  
**Description:**

Sonar Gerrit Plugin 377.v8f3808963dc5 and earlier does not require POST requests for an HTTP endpoint, resulting in a cross-site request forgery (CSRF) vulnerability.

This allows attackers to have Jenkins connect to Gerrit servers (previously configured by Jenkins administrators) using attacker-specified credentials IDs obtained through another method, potentially capturing credentials stored in Jenkins.

**Severity**

*   SECURITY-1002: Medium
*   SECURITY-2661: Medium
*   SECURITY-2810: High
*   SECURITY-2814: High
*   SECURITY-2869: High
*   SECURITY-2940: High
*   SECURITY-2967: Medium

**Affected Versions**

*   **Checkmarx Plugin** up to and including 2022.3.3
*   **Custom Build Properties Plugin** up to and including 2.79.vc095ccc85094
*   **Gitea Plugin** up to and including 1.4.4
*   **Google Login Plugin** up to and including 1.6
*   **Plot Plugin** up to and including 2.1.11
*   **Sonar Gerrit Plugin** up to and including 377.v8f3808963dc5
*   **Spring Config Plugin** up to and including 2.0.0

**Fix**

*   **Checkmarx Plugin** should be updated to version 2022.4.3
*   **Custom Build Properties Plugin** should be updated to version 2.82.v16d5b\_d3590c7
*   **Gitea Plugin** should be updated to version 1.4.5
*   **Google Login Plugin** should be updated to version 1.7
*   **Plot Plugin** should be updated to version 2.1.12
*   **Spring Config Plugin** should be updated to version 2.0.1

These versions include fixes to the vulnerabilities described above. All prior versions are considered to be affected by these vulnerabilities unless otherwise indicated.

As of publication of this advisory, no fixes are available for the following plugins:

*   Sonar Gerrit Plugin

Learn why we announce these issues.

**Credit**

The Jenkins project would like to thank the reporters for discovering and reporting these vulnerabilities:

*   **Asi Greenholts of Cider Security** for SECURITY-2661
*   **CC Bomber, Kitri BoB** for SECURITY-2940
*   **Kevin Guerroudj, CloudBees, Inc. and Valdes Che Zogou, CloudBees, Inc.** for SECURITY-2810, SECURITY-2869
*   **Oleg Nenashev, CloudBees, Inc.** for SECURITY-1002
*   **Valdes Che Zogou, CloudBees, Inc. and Yaroslav Afenkin, CloudBees, Inc.** for SECURITY-2814
*   **Wadeck Follonier, CloudBees, Inc.** for SECURITY-2967

CVE-2022-46683: Jenkins Security Advisory 2022-12-07

Jenkins Plot Plugin 2.1.11 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks.

CVE-2022-46682: Jenkins Security Advisory 2022-12-07

Jenkins Spring Config Plugin 2.0.0 and earlier does not escape build display names shown on the Spring Config view, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers able to change build display names.

CVE-2022-46687: Jenkins Security Advisory 2022-12-07

Jenkins Custom Build Properties Plugin 2.79.vc095ccc85094 and earlier does not escape property values and build display names on the Custom Build Properties and Build Summary pages, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers able to set or change these values.

CVE-2022-46686: Jenkins Security Advisory 2022-12-07

A cross-site request forgery (CSRF) vulnerability in Jenkins Sonar Gerrit Plugin 377.v8f3808963dc5 and earlier allows attackers to have Jenkins connect to Gerrit servers (previously configured by Jenkins administrators) using attacker-specified credentials IDs obtained through another method, potentially capturing credentials stored in Jenkins.

CVE-2022-46688: Jenkins Security Advisory 2022-12-07

Jenkins Checkmarx Plugin 2022.3.3 and earlier does not escape values returned from the Checkmarx service API before inserting them into HTML reports, resulting in a stored cross-site scripting (XSS) vulnerability.

CVE-2022-46684: Jenkins Security Advisory 2022-12-07

In Jenkins Gitea Plugin 1.4.4 and earlier, the implementation of Gitea personal access tokens did not support credentials masking, potentially exposing them through the build log.

CVE-2022-46685: Jenkins Security Advisory 2022-12-07

SQLite through 3.40.0, when relying on --safe for execution of an untrusted CLI script, does not properly implement the azProhibitedFunctions protection mechanism, and instead allows UDF functions such as WRITEFILE.

1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905

    "fts3\_tokenizer",
    "load\_extension",
    "readfile",
    "writefile",
    "zipfile",
    "zipfile\_cds",
  };
  UNUSED\_PARAMETER(zA2);  UNUSED\_PARAMETER(zA3);
  UNUSED\_PARAMETER(zA4);
  switch( op ){
    case SQLITE\_ATTACH: {
#ifndef SQLITE\_SHELL\_FIDDLE
      /\* In WASM builds the filesystem is a virtual sandbox, so
      \*\* there's no harm in using ATTACH. \*/
      failIfSafeMode(p, "cannot run ATTACH in safe mode");
#endif
      break;
    }
    case SQLITE\_FUNCTION: {
      int i;
      for(i=0; i<ArraySize(azProhibitedFunctions); i++){
        if( sqlite3\_stricmp(zA1, azProhibitedFunctions\[i\])==0 ){          failIfSafeMode(p, "cannot use the %s() function in safe mode",
                         azProhibitedFunctions\[i\]);
        }
      }
      break;
    }
  }

|














|

1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905

    "fts3\_tokenizer",
    "load\_extension",
    "readfile",
    "writefile",
    "zipfile",
    "zipfile\_cds",
  };
  UNUSED\_PARAMETER(zA1);  UNUSED\_PARAMETER(zA3);
  UNUSED\_PARAMETER(zA4);
  switch( op ){
    case SQLITE\_ATTACH: {
#ifndef SQLITE\_SHELL\_FIDDLE
      /\* In WASM builds the filesystem is a virtual sandbox, so
      \*\* there's no harm in using ATTACH. \*/
      failIfSafeMode(p, "cannot run ATTACH in safe mode");
#endif
      break;
    }
    case SQLITE\_FUNCTION: {
      int i;
      for(i=0; i<ArraySize(azProhibitedFunctions); i++){
        if( sqlite3\_stricmp(zA2, azProhibitedFunctions\[i\])==0 ){          failIfSafeMode(p, "cannot use the %s() function in safe mode",
                         azProhibitedFunctions\[i\]);
        }
      }
      break;
    }
  }

CVE-2022-46908: SQLite: Check-in [cefc0324]

The rxvt-unicode package is vulnerable to a remote code execution, in the Perl background extension, when an attacker can control the data written to the user's terminal and certain options are set.

'2151597?cve=title' is not a valid bug number nor an alias to a bug.

Please press **Back** and try again.

Tag

#perl